All Categories

History

2MS/s high voltage isolated input/expansion calculation module GN610B-GN610B
2MS/s high voltage isolated input/expansion calculation module GN610B-Hottinger Brüel & Kjær

2MS/s high voltage isolated input/expansion calculation module GN610B
Hottinger Brüel & Kjær


About This Product

■High voltage isolated input/expansion calculation module

2MS/s 1kV High Voltage Isolated Input/Expansion Computing Module for the Genesis High Speed ​​Series High Speed ​​High Resolution Data Acquisition System

■High voltage isolated input module (GN610B)

Isolated balanced differential inputs allow voltages up to 600V RMS to be connected directly to both inputs of each channel. Voltage input ranges can be combined. Can be used from ±20mV to ±1,000V. This module uses two 4mm safety banana plugs for each channel. The standard safety BNC Banana Adapter allows you to easily connect a banana plug to a BNC connector connected to a coaxial cable. It meets the international safety standard IEC61010-1, ensuring 600V RMSCAT II and 300V RMSCAT III level isolation for safe measurements even in electrically demanding test environments. All channels feature independent full-range input amplifiers, a choice of 7-pole Bessel or Butterworth analog anti-aliasing filters, or digital Bessel-Butterworth-Elliptical IIR filters, and an 18-bit A/D converter. To enable true real-time analysis, this module performs calculations based on real-time cycles. Automatic zero-crossing detection allows recording to be triggered with asynchronous real RSM, average values, and other calculated values. If supported by the selected mainframe, the GEN DAQ series input modules provide 16 digital input events, 2 digital output events, and 2 timer/counter channels.

  • Product

    2MS/s high voltage isolated input/expansion calculation module GN610B

Share this product


50+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of 2MS/s high voltage isolated input/expansion calculation module GN610B

Image Part Number Price (excluding tax) Voltage (wideband) RMS noise (50Ω termination) Voltage (wideband) DC reading error drift Voltage (wideband) DC reading error Voltage (wideband) DC range error drift Voltage (wideband) DC range error Insulation test between channels Insulation Test Channel vs. Chassis Insulation Input overload protection Overload recovery time Input overload protection Maximum non-destructive voltage Input overload protection Maximum overload without autoranging Input format Real-time cycle-based calculation function Passive voltage/current probe Digital event/timer/counter Maximum sampling rate per channel Slot width Common mode Maximum common mode voltage Common mode range Common Mode Rejection (CMR) Memory capacity per card Antialias filter Analog input section input coupling-4 Analog input section input coupling-3 Analog input section input coupling-2 Analog input section input coupling-1 Analog input section input impedance Analog input section connector Analog channel ADC resolution
2MS/s high voltage isolated input/expansion calculation module GN610B-Part Number-GN610B

GN610B

Available upon quote

0.03% of range ±70pV

±35ppm/℃ (±20ppm/℉)

0.1% of reading

± (50ppm+10uV) /℃ (± (28ppm+6uV) /℉)

0.02% of range ±600pV

3,510V RMS and 4,935V DC, 5 seconds, 3,260V RMS and 4,596V DC, 1 minute (IEC61010-1 and IEC61010-2-030)

3,510V RMS and 4,935V DC, 5 seconds, 3,260V RMS and 4,596V DC, 1 minute (IEC61010-1 and IEC61010-2-030)

Channel-to-channel and channel-to-chassis

Recovers to 0.1% accuracy within 5μs after 200% overload

±2,000V DC

200% of selection

Analog, isolated balanced differential

Rich set of programmable math routines (optional) triggered by calculation results

Only specially designed compatible probes (e.g. Elas HVD50R)

16 digital events and 4 timer/counter channels

2MS/s

1

7V RMS

Less than ±10V

>80dB @80Hz (typical 100dB)

2GB

Fixed bandwidth analog AA filter combined with sampling rate tracking digital AA filter

Offset: ±50% for 1,000 steps (0.1%), offset fixed at 0% for ±1,000V range

Range (1MΩ impedance): ±10mV, ±20mV, ±50mV, ±0.1V, ±0.2V, ±0.5V, ±1V, ±2V, ±5V, ±10V, ±20V, ±50V, ±100V, etc.

AC coupling frequency: 48Hz±5Hz (-3dB)

Coupling mode: AC, DC, GND

For the 1MΩ ±1%//33pF ±10% range, it is greater than ±5V. 57pF ±10% for all other ranges

Insulated 4mm banana plugs (plastic), 2 per channel (red and black)

6

18bit

Other products of Hottinger Brüel & Kjær

Reviews shown here are reviews of companies.


View more products of Hottinger Brüel & Kjær

About Company Handling This Product

Company Overview

HBK, formerly named HBM, is a global ISO9001 and ISO14001-certified company founded in 1950. It is known for p...

See More

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree