All Categories

History

Safety device for preventing reverse flash flash-S-“”DC-VR
Safety device for preventing reverse flash flash-Showden Co., Ltd.

Safety device for preventing reverse flash flash
Showden Co., Ltd.

Showden Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

117.8hours


About This Product

■Safety device for preventing reverse flash by neutralizing wire ring and insulating wire ring

This is a reverse flash protection safety device based on "Electric power communication protector (for communication cables)" (Electric power standard D-205) and "Electric power safety communication regulations" (JEAC6011). It meets various requirements for installation in information transmission systems and has highly reliable protection performance.

■High protection performance

It uses a neutralizing wire ring and insulating wire ring method to protect against potential increases caused by both commercial frequencies and lightning surges, and maintains high protection performance. Additionally, a highly reliable gas arrester with large current capacity is used.

■Improve maintenance work efficiency

It has a unit structure with a gas arrester, terminal board, etc. mounted on the front, making installation and maintenance easy.

■Features

・Various circuit methods available depending on the type of circuit used ・Compliant with power standard D-205

■Installation precautions

- For external cables and remote grounding wires, use insulated wires with a withstand voltage that matches the potential rise value. ・Please use insulated wire of 22mm2 or more for remote and in-house grounding wires. Please connect the aluminum sheath of the outside cable to the remote grounding terminal, and the aluminum sheath of the local cable to the local grounding terminal. ・If the premises of the electrical station is large and the communication equipment is far from the place where the protector is installed, and there is a risk that the cable installation within the premises may be affected by lightning surges or switching surges, install cables in MDF, etc. in the communication equipment room. Please install a safety device.

■Caution

・The commercial withstand voltage value is displayed in the model name S-. ・Commercial withstand voltage: Between the ground and between the primary and secondary terminals, the value in parentheses is 1 minute. ・Insulation resistance: Measured at 500V DC between ground and between primary and secondary terminals, and should be 100MΩ or more.

  • Product

    Safety device for preventing reverse flash flash

Share this product


590+ people viewing

Last viewed: 1 hour ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

6 Models of Safety device for preventing reverse flash flash

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Purpose Transmission frequency band (Hz) Transmission level Impedance (Ω) DC resistance (single wire) (Ω)
Safety device for preventing reverse flash flash-Part Number-S-“”DC-VR

S-“”DC-VR

Available upon quote

Public/DC signal/communication lines (compatible with general telephone lines)

DC, 16, 0.3~3.4k

+10dBm

600±20%

60 or less

Safety device for preventing reverse flash flash-Part Number-S-“”DC-CVR

S-“”DC-CVR

Available upon quote

DC signal/carrier line (corresponds to carrier line with superimposed DC voltage)

DC, 16, 0.3~160k

+10dBm

150±20%

60 or less

Safety device for preventing reverse flash flash-Part Number-S-“”DC-PCM

S-“”DC-PCM

Available upon quote

PCM carrier line (compatible with PCM carrier line with superimposed DC voltage)

DC, 50k~2M

4Vo-p

110±20%

60 or less

Safety device for preventing reverse flash flash-Part Number-S-“”DC-INT

S-“”DC-INT

Available upon quote

ISDN line (compatible with ISDN line)

DC, 10k~2M

+10dBm

110

60 or less

Safety device for preventing reverse flash flash-Part Number-S-“”AC-VR

S-“”AC-VR

Available upon quote

AC signal/communication line (compatible with AC signal (teleconverter) line)

16, 0.3~3.4k

+10dBm

600±20%

-
Safety device for preventing reverse flash flash-Part Number-S-“”AC-CV

S-“”AC-CV

Available upon quote

AC signal/carrier line (corresponds to carrier line where DC voltage is not superimposed)

0.3~160k

+10dBm

150±20%

-

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Safety Devices Products

Other products of Showden Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Showden Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

117.8hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree