DC amplifier AL series
A and Day Co., Ltd.
About This Product
Isolation amplifier that increases the reliability and safety of measurement systems
AL1101 is a 2 channel/unit signal conditioner suitable for multi-channel measurement systems. Addition and subtraction can be performed between channels. To counter high frequency noise, a high level of CMRR (common mode rejection ratio) is ensured throughout the entire band.
■Features
・Achieve miniaturization
・Low noise due to differential input for both channels
・Voltage output is possible by adding/subtracting between A channel and B channel with a single switch.
・Isolation between input and output and between each channel
-
Product
DC amplifier AL series
-
Handling Company
A and Day Co., Ltd.
-
Categories
3 Models of DC amplifier AL series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | External dimensions | Gain accuracy | Gain stability | Input impedance | Linearity | Mass | Noise | Number of channels | Power supply/power consumption |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
AL1101 |
$ 1,105.00〜 | Width 49.5 x height 143 x depth 254 (mm, not including protrusions) | ±0.5% (23℃±5℃) | ±0.05%/℃ | 1MΩ+1MΩ or more (when below the allowable input voltage) | ±0.05%/FS | Approximately 1.5kg | Within 50mVp-p (output value, gain x 100, VAR minimum) | 2ch/unit | AC100V±10% (50Hz, 60Hz), 10VA |
|
|
AL1201 |
$ 1,365.00〜 | Width 49.5 x height 143 x depth 254 (mm, not including protrusions) | ±0.1% (23℃±5℃) | ±0.025%/FS | 10MΩ+10MΩ or more (when the input voltage is below the allowable input voltage) | ±0.025%/FS | Approximately 1.4kg | Within 50μVp-p (input conversion value, gain x 2000, VAR minimum) | 1ch/unit | AC100V±10% (50Hz, 60Hz), 8VA |
|
|
AL1301 |
$ 1,495.00〜 | Width 49.5 x height 143 x depth 254 (mm, not including protrusions) | ±0.03%/℃ | ±0.025%/FS |
・ATT×1 10MΩ+10MΩ or more (when the input voltage is below the allowable input voltage) (Note) If the input voltage exceeds the allowable input voltage, the input impedance will drop dramatically until the input fuse blows. ・ATT×1/1000 10MΩ+10MΩ (±2%) |
±0.025%/FS | Approximately 1.7kg | Within 100μVp-p (input conversion value, gain x 1000, VAR minimum) | 1ch/unit | AC100V±10% (50Hz, 60Hz), 8VA |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of A and Day Co., Ltd.
View more products of A and Day Co., Ltd.
About Company Handling This Product
- Japan