All Categories

History

  1. Metoree
  2. Clamps & Fasteners
  3. Toolholders
  4. Hydraulic extension tool holder TENDO Turn (Sunk Japan Co., Ltd.)
Hydraulic extension tool holder TENDO Turn-TENDO Turn DKEØ1 1/2" Ø3/4"x59
Hydraulic extension tool holder TENDO Turn-TENDO Turn DSEØ20 Ø12x48
Hydraulic extension tool holder TENDO Turn-Sunk Japan Co., Ltd.

Hydraulic extension tool holder TENDO Turn
Sunk Japan Co., Ltd.

Sunk Japan Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

12.4hours

Relatively Fast Response

About This Product

In addition to features such as a wide clamping range thanks to the use of an intermediate sleeve, run-out and repeatability of <0.003 mm (DSE double clamp insert) and ease of handling, the TENDO Turn offers high performance thanks to its unique vibration suppression . This allows you to finish the workpiece surface with high quality. Advantages and Benefits

■Accurate presetting of axial protrusion amount

0.01 mm accuracy range length adjustment, adjustment travel width 10 mm

■Repeat runout accuracy is always less than 0.003 mm

Stable operation and extremely high repeatability for optimal surface finishing, fast and safe processing.

■Excellent vibration damping mechanism

Prevents micro dust, keeps work surfaces in the best condition, protects machine axes and extends tool life, leading to cost savings.

■It is possible to change tools with micron precision in just a few seconds without any peripheral equipment.

In addition to the time-saving effect of shortening setup changeover time, there is no investment or energy cost associated with adding clamping equipment.

■Low maintenance frequency

Fully enclosed system ensures long product life

■Balance fine-tuned with default settings

Suitable for high speeds, balance class G2.5 at 25,000 rpm (double clamp insert DSE)

■High adaptability

Slotted intermediate sleeve or coolant compatible intermediate sleeve for clamping different diameters

■Wide compatibility

Best performance in combination with TENDO SVL and TRIBOS SVL extensions

■All commercially available shank types can be clamped.

Smooth cylindrical shank, DIN 1835 and DIN 6535 HA Suitable shank form A Form AB: flat face and cylindrical shank with drawing surface, DIN 1835 and DIN 6535 HB Suitable shank form B Form B: Lateral pulling surface, DIN 1835 Suitable shank form B Form E: Inclined clamping surface, DIN 1835 and DIN 6535 HE Suitable form E

■Internal grooves remove dirt and maintain transmission torque

Oil, grease or lubricant residues can be removed from the foreign material groove, thus maintaining a dry clamping surface

■Options, etc.

・Achieves flexible clamping area by using intermediate sleeve The intermediate sleeve allows clamping of shanks of various diameters from 3 to 32 mm with just one tool holder. Benefits for customers: lower acquisition costs, increased gripping force due to shank diameter. *Other product numbers are available.

  • Product

    Hydraulic extension tool holder TENDO Turn

Share this product


550+ people viewing

Last viewed: 11 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of Hydraulic extension tool holder TENDO Turn

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Weight (kg) Minimum torque (Nm) Toolbar interface Series Technology
Hydraulic extension tool holder TENDO Turn-Part Number-TENDO Turn DKEØ1 1/2" Ø3/4"x59

TENDO Turn DKEØ1 1/2" Ø3/4"x59

Available upon quote

0.7

280

DKE

TENDO Turn

Hydraulic expansion tool holder

Hydraulic extension tool holder TENDO Turn-Part Number-TENDO Turn DKEØ1 1/4" Ø3/4"x59

TENDO Turn DKEØ1 1/4" Ø3/4"x59

Available upon quote

0.55

280

DKE

TENDO Turn

Hydraulic expansion tool holder

Hydraulic extension tool holder TENDO Turn-Part Number-TENDO Turn DKEØ1" Ø1/2"x49

TENDO Turn DKEØ1" Ø1/2"x49

Available upon quote

0.35

75

DKE

TENDO Turn

Hydraulic expansion tool holder

Hydraulic extension tool holder TENDO Turn-Part Number-TENDO Turn DKEØ25 Ø12x49

TENDO Turn DKEØ25 Ø12x49

Available upon quote

0.38

75

DKE

TENDO Turn

Hydraulic expansion tool holder

Hydraulic extension tool holder TENDO Turn-Part Number-TENDO Turn DKEØ25 Ø16x56

TENDO Turn DKEØ25 Ø16x56

Available upon quote

0.38

185

DKE

TENDO Turn

Hydraulic expansion tool holder

Hydraulic extension tool holder TENDO Turn-Part Number-TENDO Turn DKEØ32 Ø20x59

TENDO Turn DKEØ32 Ø20x59

Available upon quote

0.7

280

DKE

TENDO Turn

Hydraulic expansion tool holder

Hydraulic extension tool holder TENDO Turn-Part Number-TENDO Turn DSEØ20 Ø12x48

TENDO Turn DSEØ20 Ø12x48

Available upon quote

0.4

65

DSE

TENDO Turn

Hydraulic expansion tool holder

Hydraulic extension tool holder TENDO Turn-Part Number-TENDO Turn DSEØ20 Ø12x48 OAS

TENDO Turn DSEØ20 Ø12x48 OAS

Available upon quote

0.4

65

DSE

TENDO Turn

Hydraulic expansion tool holder

Hydraulic extension tool holder TENDO Turn-Part Number-TENDO Turn DSEØ25 Ø20x50

TENDO Turn DSEØ25 Ø20x50

Available upon quote

0.6

220

DSE

TENDO Turn

Hydraulic expansion tool holder

Hydraulic extension tool holder TENDO Turn-Part Number-TENDO Turn DSEØ25 Ø20x50 OAS

TENDO Turn DSEØ25 Ø20x50 OAS

Available upon quote

0.6

220

DSE

TENDO Turn

Hydraulic expansion tool holder

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Low load, high quality knurling QUICK Cutting knurling tool Flat knurling for small diameter machining C601-08,10,12,16-N-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK Cutting knurling tool Flat knurling for small diameter machining C601-08,10,12,16-N

Yamada Machine Tool Co., Ltd.

240+ people viewing

Last viewed: 17 hours ago

Response time: 15.39 hours

Toolholders

8 models listed

Quick change collet chuck (for lathe)-NK Works Co., Ltd.

Quick change collet chuck (for lathe)

NK Works Co., Ltd.

200+ people viewing

Response time: 37.05 hours

Toolholders

3 models listed

SSW (Synchronized Stir Welding) Tool Holder-Keihin Ramtech Co., Ltd.

SSW (Synchronized Stir Welding) Tool Holder

Keihin Ramtech Co., Ltd.

20+ people viewing

Last viewed: 20 hours ago

Toolholders
NC Touring Super Titite Lock Milling Chuck-Saiyasu Co., Ltd.

NC Touring Super Titite Lock Milling Chuck

Saiyasu Co., Ltd.

610+ people viewing

Last viewed: 12 hours ago

Toolholders

30 models listed

Interior ALHIDE paper holder-Almetax Co., Ltd.

Interior ALHIDE paper holder

Almetax Co., Ltd.

110+ people viewing

Last viewed: 1 hour ago

Toolholders

3 models listed

NC Touring height adjustment type Collet Holder-Saiyasu Co., Ltd.

NC Touring height adjustment type Collet Holder

Saiyasu Co., Ltd.

520+ people viewing

Last viewed: 11 minutes ago

Toolholders

10 models listed

Collet holder for height adjustable drill-NT Tools Co., Ltd.

Collet holder for height adjustable drill

NT Tools Co., Ltd.

110+ people viewing

Last viewed: 17 hours ago

Response time: 208.14 hours

Toolholders

3 models listed

Interior ALHIDE paper storage-Almetax Co., Ltd.

Interior ALHIDE paper storage

Almetax Co., Ltd.

100+ people viewing

Last viewed: 1 hour ago

Toolholders

3 models listed

NC Touring "R" Zero Holder-Saiyasu Co., Ltd.

NC Touring "R" Zero Holder

Saiyasu Co., Ltd.

550+ people viewing

Last viewed: 13 minutes ago

Toolholders

10 models listed

Interior ALHIDE towel bar S-Almetax Co., Ltd.

Interior ALHIDE towel bar S

Almetax Co., Ltd.

130+ people viewing

Last viewed: 1 hour ago

Toolholders

3 models listed

NC Touring Slim Hide Ro Chuck-Saiyasu Co., Ltd.

NC Touring Slim Hide Ro Chuck

Saiyasu Co., Ltd.

530+ people viewing

Toolholders

20 models listed

Milling holder Himatec Tool holder for compound lathe-Yamada Machine Tool Co., Ltd.

Milling holder Himatec Tool holder for compound lathe

Yamada Machine Tool Co., Ltd.

180+ people viewing

Last viewed: 11 hours ago

Response time: 15.39 hours

Toolholders

3 models listed

See More Toolholders Products

Other products of Sunk Japan Co., Ltd.

Reviews shown here are reviews of companies.

General-purpose 2-nail flat lines with high payloads using a large joe stroke, integrated sensor system, and Selation Guide-Sunk Japan Co., Ltd.

General-purpose 2-nail flat lines with high payloads using a large joe stroke, integrated sensor system, and Selation Guide

Sunk Japan Co., Ltd.

580+ people viewing

Response time: 12.40 hours

Grippers

10 models listed

Highly versatile 2 -nail gripper EGK that realizes work diversity with maximum process reliability-Sunk Japan Co., Ltd.

Highly versatile 2 -nail gripper EGK that realizes work diversity with maximum process reliability

Sunk Japan Co., Ltd.

650+ people viewing

Last viewed: 51 minutes ago

Response time: 12.40 hours

Grippers

10 models listed

Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity-Sunk Japan Co., Ltd.

Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity

Sunk Japan Co., Ltd.

560+ people viewing

Response time: 12.40 hours

Grippers

10 models listed

Electric type 2 finger parallel gripper ELG with a long joe stroke, long finger use with a profile processed rail guide-Sunk Japan Co., Ltd.

Electric type 2 finger parallel gripper ELG with a long joe stroke, long finger use with a profile processed rail guide

Sunk Japan Co., Ltd.

910+ people viewing

Last viewed: 4 hours ago

Response time: 12.40 hours

Grippers

40 models listed

A large joe stroke, a profed rail guide to use a long finger, the air pressure type 2 finger parallel pLG PLG-Sunk Japan Co., Ltd.

A large joe stroke, a profed rail guide to use a long finger, the air pressure type 2 finger parallel pLG PLG

Sunk Japan Co., Ltd.

660+ people viewing

Response time: 12.40 hours

Grippers

30 models listed

General-purpose 2-nail flat opening and closing with a T slot guide JGP-P-Sunk Japan Co., Ltd.

General-purpose 2-nail flat opening and closing with a T slot guide JGP-P

Sunk Japan Co., Ltd.

1240+ people viewing

Response time: 12.40 hours

Grippers

10 models listed

Multi-touse guide used general-purpose electric 2-claw flat opening and closing gripper PGN-PLUS-P that can also support high torque load-Sunk Japan Co., Ltd.

Multi-touse guide used general-purpose electric 2-claw flat opening and closing gripper PGN-PLUS-P that can also support high torque load

Sunk Japan Co., Ltd.

1010+ people viewing

Response time: 12.40 hours

Grippers

20 models listed

Collaboration-type gripper 24V operation and digital I/O-used work certified electric type 2 claws flat opening and closing gripper co-act EGP-C-Sunk Japan Co., Ltd.

Collaboration-type gripper 24V operation and digital I/O-used work certified electric type 2 claws flat opening and closing gripper co-act EGP-C

Sunk Japan Co., Ltd.

510+ people viewing

Response time: 12.40 hours

Grippers

20 models listed

Long stroke gripper Lightweight profile rail guide and compatible servo motor electric 2 -claw flat line opening and closing gripper EGA-Sunk Japan Co., Ltd.

Long stroke gripper Lightweight profile rail guide and compatible servo motor electric 2 -claw flat line opening and closing gripper EGA

Sunk Japan Co., Ltd.

500+ people viewing

Last viewed: 15 hours ago

Response time: 12.40 hours

Grippers

40 models listed

Small 3 -nail opening and closing center gripper MPZ with a T -slot guide for small parts for small parts-Sunk Japan Co., Ltd.

Small 3 -nail opening and closing center gripper MPZ with a T -slot guide for small parts for small parts

Sunk Japan Co., Ltd.

480+ people viewing

Response time: 12.40 hours

Grippers

10 models listed

General-purpose long stroke gripper PZH-PLUS with a large movement volume and a large maximum torque due to the multi-coase guide-Sunk Japan Co., Ltd.

General-purpose long stroke gripper PZH-PLUS with a large movement volume and a large maximum torque due to the multi-coase guide

Sunk Japan Co., Ltd.

760+ people viewing

Response time: 12.40 hours

Grippers

4 models listed

Cleaning device cleaning unit RGG with shank interface when cleaning of clamping devices or automatic driving of machineing centers-Sunk Japan Co., Ltd.

Cleaning device cleaning unit RGG with shank interface when cleaning of clamping devices or automatic driving of machineing centers

Sunk Japan Co., Ltd.

230+ people viewing

Response time: 12.40 hours

Grippers

View more products of Sunk Japan Co., Ltd.

About Company Handling This Product

Sunk Japan Co., Ltd.

Response Rate

100.0%

Response Time

12.4hrs

  • Japan

Related search keywords

Toolholders
Toolholders　Sunk Japan Co., Ltd.
Sunk Japan Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree