Hydraulic extension tool holder TENDO Slim 4ax-TENDO Slim 4ax JIS-BT30 Ø6x80

Hydraulic extension tool holder TENDO Slim 4ax-TENDO Slim 4ax SCAPTO C6 Ø6x80

Hydraulic extension tool holder TENDO Slim 4ax-TENDO Slim 4ax SCAPTO C6 Ø6x120

Hydraulic extension tool holder TENDO Slim 4ax
Sunk Japan Co., Ltd.

Sunk Japan Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

11.7hours

Fast Response

About This Product

SCHUNK TENDO Slim 4ax is a tool holder for axial machining and radial precision machining. The only model in its class that meets all your requirements: thermal shrink contour according to DIN69882-8, easy handling, short set-up times, long tool life, Plug&Work, high flexibility and can be used with a minimum amount of lubrication. can.

Advantages and Benefits
■Plug and workCan be used in existing processes without reprogramming

■Balance fine-tuned with default settingsAchieves a balance grade of G 2.5 at 25,000 RPM, making it suitable for high speed rotation and HSC machining centers.

■It is possible to change tools with micron precision in just a few seconds without any peripheral equipment.In addition to the time-saving effect of shortening setup changeover time, there is no investment or energy cost associated with adding clamping equipment.

■Repeat runout accuracy is always less than 0.003 mmUniform cutting action, long tool life, reduced cost of new tool grinding and procurement

■Excellent vibration damping mechanismPrevents micro dust, keeps work surfaces in the best condition, protects machine axes and extends tool life, leading to cost savings.

■Accurate length preset0.01 mm accuracy range length adjustment, adjustment travel width 10 mm

■The best time is when machining in the axial directionDrilling, counterbore/chamfering, reaming, and threading in 5-axis centers, dies, and mold structures

■Achieves the best dimensional accuracy with extremely superior radial rigidityStrong base body prevents side vibration during cutting

■All commercially available shank types can be clamped.Smooth cylindrical shank, DIN 1835 and DIN 6535 HA suitable shank form A Form AB: With flat seat and cylindrical shank with drawing surface, DIN 1835 and DIN 6535 HB suitable shank form B Form B: Lateral drawing surface, DIN 1835 Suitable shank form B Form E: Inclined clamping surface, DIN 1835 and DIN 6535 HE conforming form E

■High adaptabilitySlotted intermediate sleeve or coolant compatible intermediate sleeve for clamping different diameters

■Internal grooves remove dirt and maintain transmission torqueOil, grease or lubricant residues can be removed from the foreign material groove, thus maintaining a dry clamping surface

Model
There are 10 models available for this product.

Product
Hydraulic extension tool holder TENDO Slim 4ax

Handling Company
Sunk Japan Co., Ltd.

Categories

Clamps & Fasteners

Toolholders

670+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of Hydraulic extension tool holder TENDO Slim 4ax

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Weight (kg)	Minimum torque (Nm)	Tool holder standard	Toolbar interface	Series	Technology
TENDO Slim 4ax JIS-BT30 Ø6x80	Available upon quote	0.6	16	DIN ISO 7388-2 JD	JIS-BT 30	TENDO Slim 4ax	Hydraulic expansion tool holder
TENDO Slim 4ax JIS-BT30 Ø8x80	Available upon quote	0.6	Twenty three	DIN ISO 7388-2 JD	JIS-BT 30	TENDO Slim 4ax	Hydraulic expansion tool holder
TENDO Slim 4ax JIS-BT30 Ø10x80	Available upon quote	0.6	45	DIN ISO 7388-2 JD	JIS-BT 30	TENDO Slim 4ax	Hydraulic expansion tool holder
TENDO Slim 4ax JIS-BT30 Ø12x80	Available upon quote	0.6	90	DIN ISO 7388-2 JD	JIS-BT 30	TENDO Slim 4ax	Hydraulic expansion tool holder
TENDO Slim 4ax JIS-BT30 Ø16x80	Available upon quote	0.6	185	DIN ISO 7388-2 JD	JIS-BT 30	TENDO Slim 4ax	Hydraulic expansion tool holder
TENDO Slim 4ax JIS-BT30 Ø20x90	Available upon quote	0.8	330	DIN ISO 7388-2 JD	JIS-BT 30	TENDO Slim 4ax	Hydraulic expansion tool holder
TENDO Slim 4ax SCAPTO C6 Ø6x80	Available upon quote	1	16	ISO 26623-1	SCHUNK CAPTO C6	TENDO Slim 4ax	Hydraulic expansion tool holder
TENDO Slim 4ax SCAPTO C6 Ø6x120	Available upon quote	1.2	16	ISO 26623-1	SCHUNK CAPTO C6	TENDO Slim 4ax	Hydraulic expansion tool holder
TENDO Slim 4ax SCAPTO C6 Ø8x80	Available upon quote	1	Twenty three	ISO 26623-1	SCHUNK CAPTO C6	TENDO Slim 4ax	Hydraulic expansion tool holder
TENDO Slim 4ax SCAPTO C6 Ø8x120	Available upon quote	1.2	Twenty three	ISO 26623-1	SCHUNK CAPTO C6	TENDO Slim 4ax	Hydraulic expansion tool holder

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Low load, high quality knurling QUICK Cutting knurling tool Flat knurling for small diameter machining C601-08,10,12,16-N

Yamada Machine Tool Co., Ltd.

270+ people viewing

Last viewed: 17 hours ago

Response time: 13.33 hours

Toolholders

8 models listed

Quick change collet chuck (for lathe)

NK Works Co., Ltd.

240+ people viewing

Response time: 37.05 hours

Toolholders

3 models listed

SSW (Synchronized Stir Welding) Tool Holder

Keihin Ramtech Co., Ltd.

60+ people viewing

Toolholders

NC Touring Super Titite Lock Milling Chuck

Saiyasu Co., Ltd.

690+ people viewing

Last viewed: 11 hours ago

Response time: 114.40 hours

Toolholders

30 models listed

Interior ALHIDE paper holder

Almetax Co., Ltd.

140+ people viewing

Last viewed: 9 minutes ago

Response time: 424.77 hours

Toolholders

3 models listed

NC Touring height adjustment type Collet Holder

Saiyasu Co., Ltd.

580+ people viewing

Last viewed: 3 hours ago

Response time: 114.40 hours

Toolholders

10 models listed

Collet holder for height adjustable drill

NT Tools Co., Ltd.

140+ people viewing

Response time: 105.54 hours

Toolholders

3 models listed

Interior ALHIDE paper storage

Almetax Co., Ltd.

130+ people viewing

Response time: 424.77 hours

Toolholders

3 models listed

NC Touring "R" Zero Holder

Saiyasu Co., Ltd.

600+ people viewing

Last viewed: 17 minutes ago

Response time: 114.40 hours

Toolholders

10 models listed

Interior ALHIDE towel bar S

Almetax Co., Ltd.

150+ people viewing

Last viewed: 4 minutes ago

Response time: 424.77 hours

Toolholders

3 models listed

NC Touring Slim Hide Ro Chuck

Saiyasu Co., Ltd.

580+ people viewing

Last viewed: 4 minutes ago

Response time: 114.40 hours

Toolholders

20 models listed

PCM Willen Milling holder for Swiss type automatic lathe

Yamada Machine Tool Co., Ltd.

170+ people viewing

Response time: 13.33 hours

Toolholders

3 models listed

See More Toolholders Products

Other products of Sunk Japan Co., Ltd.

Reviews shown here are reviews of companies.

General-purpose 2-nail flat lines with high payloads using a large joe stroke, integrated sensor system, and Selation Guide

Sunk Japan Co., Ltd.

680+ people viewing

Last viewed: 11 hours ago

Response time: 11.74 hours

Grippers

10 models listed

Highly versatile 2 -nail gripper EGK that realizes work diversity with maximum process reliability

Sunk Japan Co., Ltd.

690+ people viewing

Response time: 11.74 hours

Grippers

10 models listed

Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity

Sunk Japan Co., Ltd.

610+ people viewing

Last viewed: 15 hours ago

Response time: 11.74 hours

Grippers

10 models listed

Electric type 2 finger parallel gripper ELG with a long joe stroke, long finger use with a profile processed rail guide

Sunk Japan Co., Ltd.

990+ people viewing

Last viewed: 17 hours ago

Response time: 11.74 hours

Grippers

40 models listed

A large joe stroke, a profed rail guide to use a long finger, the air pressure type 2 finger parallel pLG PLG

Sunk Japan Co., Ltd.

720+ people viewing

Response time: 11.74 hours

Grippers

30 models listed

General-purpose 2-nail flat opening and closing with a T slot guide JGP-P

Sunk Japan Co., Ltd.

1330+ people viewing

Last viewed: 14 hours ago

Response time: 11.74 hours

Grippers

10 models listed

Multi-touse guide used general-purpose electric 2-claw flat opening and closing gripper PGN-PLUS-P that can also support high torque load

Sunk Japan Co., Ltd.

1090+ people viewing

Last viewed: 21 hours ago

Response time: 11.74 hours

Grippers

20 models listed

Collaboration-type gripper 24V operation and digital I/O-used work certified electric type 2 claws flat opening and closing gripper co-act EGP-C

Sunk Japan Co., Ltd.

570+ people viewing

Last viewed: 12 hours ago

Response time: 11.74 hours

Grippers

20 models listed

Long stroke gripper Lightweight profile rail guide and compatible servo motor electric 2 -claw flat line opening and closing gripper EGA

Sunk Japan Co., Ltd.

560+ people viewing

Response time: 11.74 hours

Grippers

40 models listed

Small 3 -nail opening and closing center gripper MPZ with a T -slot guide for small parts for small parts

Sunk Japan Co., Ltd.

540+ people viewing

Last viewed: 10 hours ago

Response time: 11.74 hours

Grippers

10 models listed

General-purpose long stroke gripper PZH-PLUS with a large movement volume and a large maximum torque due to the multi-coase guide

Sunk Japan Co., Ltd.

870+ people viewing

Response time: 11.74 hours

Grippers

4 models listed

Cleaning device cleaning unit RGG with shank interface when cleaning of clamping devices or automatic driving of machineing centers

Sunk Japan Co., Ltd.

250+ people viewing

Response time: 11.74 hours

Grippers

View more products of Sunk Japan Co., Ltd.

About Company Handling This Product

Sunk Japan Co., Ltd.

Response Rate

100.0%

Response Time

11.7hrs

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Hydraulic extension tool holder TENDO Slim 4ax Sunk Japan Co., Ltd.

Sunk Japan Co., Ltd.'s Response Status

About This Product

■Plug and work

■Balance fine-tuned with default settings

■It is possible to change tools with micron precision in just a few seconds without any peripheral equipment.

■Repeat runout accuracy is always less than 0.003 mm

■Excellent vibration damping mechanism

■Accurate length preset

■The best time is when machining in the axial direction

■Achieves the best dimensional accuracy with extremely superior radial rigidity

■All commercially available shank types can be clamped.

■High adaptability

■Internal grooves remove dirt and maintain transmission torque

10 Models of Hydraulic extension tool holder TENDO Slim 4ax

Customers who viewed this product also viewed

Other products of Sunk Japan Co., Ltd.

About Company Handling This Product

Related search keywords

Hydraulic extension tool holder TENDO Slim 4ax
Sunk Japan Co., Ltd.