All Categories

History

SPT Series Push Lock Switch (Screw Mounting) Mounting Hole φ3.2 Type-SPT2110A
SPT Series Push Lock Switch (Screw Mounting) Mounting Hole φ3.2 Type-SPT2110D
SPT Series Push Lock Switch (Screw Mounting) Mounting Hole φ3.2 Type-SGM Co., Ltd.

SPT Series Push Lock Switch (Screw Mounting) Mounting Hole φ3.2 Type
SGM Co., Ltd.

SGM Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

33.7hours

Relatively Fast Response


About This Product

Features

■Perfect lock

The use of a pressed product prevents the spring from getting caught and locks perfectly.

■Epoxy seal

The terminals are sealed with epoxy to prevent solder flux from entering.

■Twist terminal

The terminal angle uses a twist terminal that makes soldering work easier.

■Rating

3 types: 3A, 6A, 10A

■Vibration resistance

There should be no abnormalities such as incorrect opening/closing or damage even if vibration is applied at 10 to 55HZ with a total amplitude of 1.5mm for 2 hours in each of 6 directions.

■Shock resistance

There should be no abnormalities such as incorrect opening/closing or damage even when applying acceleration of 50G and connection time of 11msec three times in each of six directions.

■Moisture resistance

After leaving the sample in a constant temperature bath with a temperature of 40±2℃ and a relative temperature of 90 to 95% for 96 hours, remove the sample, wipe off the water droplets, and measure the insulation resistance within 5 minutes, which should be 10MΩ or higher. *Other product numbers are available.

  • Product

    SPT Series Push Lock Switch (Screw Mounting) Mounting Hole φ3.2 Type

Share this product


560+ people viewing

Last viewed: 9 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of SPT Series Push Lock Switch (Screw Mounting) Mounting Hole φ3.2 Type

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Operating temperature range Initial contact resistance Circuit Rating Mechanical life Insulation resistance Withstand voltage Electrical life
SPT Series Push Lock Switch (Screw Mounting) Mounting Hole φ3.2 Type-Part Number-SPT2110A

SPT2110A

Available upon quote

-20℃~+70℃

20mΩ or less at DC2~4V1A.

Single pole single throw

10A 125V AC, 5A 250V AC

Capable of opening and closing operations over 40,000 times.

DC500V 100MΩ or more.

1,000V AC for 1 minute (between terminals and terminals), 1,500V AC for 1 minute (between terminals and ground)

Capable of opening and closing operations over 10,000 times.

SPT Series Push Lock Switch (Screw Mounting) Mounting Hole φ3.2 Type-Part Number-SPT2110D

SPT2110D

Available upon quote

-20℃~+70℃

20mΩ or less at DC2~4V1A.

2 pole double throw

10A 125V AC, 5A 250V AC

Capable of opening and closing operations over 40,000 times.

DC500V 100MΩ or more.

1,000V AC for 1 minute (between terminals and terminals), 1,500V AC for 1 minute (between terminals and ground)

Capable of opening and closing operations over 10,000 times.

SPT Series Push Lock Switch (Screw Mounting) Mounting Hole φ3.2 Type-Part Number-SPT2210K

SPT2210K

Available upon quote

-20℃~+70℃

20mΩ or less at DC2~4V1A.

Single pole single throw

10A 125V AC, 5A 250V AC

Capable of opening and closing operations over 40,000 times.

DC500V 100MΩ or more.

1,000V AC for 1 minute (between terminals and terminals), 1,500V AC for 1 minute (between terminals and ground)

Capable of opening and closing operations over 10,000 times.

SPT Series Push Lock Switch (Screw Mounting) Mounting Hole φ3.2 Type-Part Number-SPT2210N

SPT2210N

Available upon quote

-20℃~+70℃

20mΩ or less at DC2~4V1A.

2 pole double throw

10A 125V AC, 5A 250V AC

Capable of opening and closing operations over 40,000 times.

DC500V 100MΩ or more.

1,000V AC for 1 minute (between terminals and terminals), 1,500V AC for 1 minute (between terminals and ground)

Capable of opening and closing operations over 10,000 times.

SPT Series Push Lock Switch (Screw Mounting) Mounting Hole φ3.2 Type-Part Number-SPT2106A

SPT2106A

Available upon quote

-20℃~+70℃

20mΩ or less at DC2~4V1A.

Single pole single throw

6A 125V AC, 4A 250V AC

Capable of opening and closing operations over 40,000 times.

DC500V 100MΩ or more.

1,000V AC for 1 minute (between terminals and terminals), 1,500V AC for 1 minute (between terminals and ground)

Capable of opening and closing operations over 10,000 times.

SPT Series Push Lock Switch (Screw Mounting) Mounting Hole φ3.2 Type-Part Number-SPT2106D

SPT2106D

Available upon quote

-20℃~+70℃

20mΩ or less at DC2~4V1A.

2 pole double throw

6A 125V AC, 4A 250V AC

Capable of opening and closing operations over 40,000 times.

DC500V 100MΩ or more.

1,000V AC for 1 minute (between terminals and terminals), 1,500V AC for 1 minute (between terminals and ground)

Capable of opening and closing operations over 10,000 times.

SPT Series Push Lock Switch (Screw Mounting) Mounting Hole φ3.2 Type-Part Number-SPT2206K

SPT2206K

Available upon quote

-20℃~+70℃

20mΩ or less at DC2~4V1A.

Single pole single throw

6A 125V AC, 4A 250V AC

Capable of opening and closing operations over 40,000 times.

DC500V 100MΩ or more.

1,000V AC for 1 minute (between terminals and terminals), 1,500V AC for 1 minute (between terminals and ground)

Capable of opening and closing operations over 10,000 times.

SPT Series Push Lock Switch (Screw Mounting) Mounting Hole φ3.2 Type-Part Number-SPT2206N

SPT2206N

Available upon quote

-20℃~+70℃

20mΩ or less at DC2~4V1A.

2 pole double throw

6A 125V AC, 4A 250V AC

Capable of opening and closing operations over 40,000 times.

DC500V 100MΩ or more.

1,000V AC for 1 minute (between terminals and terminals), 1,500V AC for 1 minute (between terminals and ground)

Capable of opening and closing operations over 10,000 times.

SPT Series Push Lock Switch (Screw Mounting) Mounting Hole φ3.2 Type-Part Number-SPT2103A

SPT2103A

Available upon quote

-20℃~+70℃

20mΩ or less at DC2~4V1A.

Single pole single throw

3A 125V AC, 1.5A 250V AC

Capable of opening and closing operations over 40,000 times.

DC500V 100MΩ or more.

1,000V AC for 1 minute (between terminals and terminals), 1,500V AC for 1 minute (between terminals and ground)

Capable of opening and closing operations over 10,000 times.

SPT Series Push Lock Switch (Screw Mounting) Mounting Hole φ3.2 Type-Part Number-SPT2103D

SPT2103D

Available upon quote

-20℃~+70℃

20mΩ or less at DC2~4V1A.

2 pole double throw

3A 125V AC, 1.5A 250V AC

Capable of opening and closing operations over 40,000 times.

DC500V 100MΩ or more.

1,000V AC for 1 minute (between terminals and terminals), 1,500V AC for 1 minute (between terminals and ground)

Capable of opening and closing operations over 10,000 times.

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More DIP Switches Products

Other products of SGM Co., Ltd.

Reviews shown here are reviews of companies.


View more products of SGM Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

33.7hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree