Drill blades corresponding to thick plates and low torque torque torque torque screw screw Excel (Excel) -550 thick plate
Maru Emmako Co., Ltd.
About This Product
■ High strength, high corrosion resistance, high -donation self -drilling screw
・ Three processes of lower holes, tapping, and conclusions can be one motion
・ Improve work efficiency by concluding without a lower hole
・ The drill part can be bite and can penetrate to 10 mm thick steel plate
■ Use Perfect Stainless Steel (PS -550)
Grow oxide, molybdenum, and nitrogen films on the surface
■ High intensity: Pulling destruction load 28,100N * Active value
Because it has enough hardness to the heart, the screw mountain does not deform, and you can get a high tightening force.
■ High corrosion resistance: SUS304 equivalent corrosion resistance
It shows the same corrosion resistance as SUS XM7 / 304, and demonstrates outstanding durability in the environment, such as salt damage and acid rain.
■ High dormitory: Clear the head dust test of stainless steel tapping screws (Jisb1122)
Products with excellent strength, corrosion resistance, and dust because the material is perfect stainless steel (PS-550).
■ Adopts "Sun Lock" shape
・ Non -circular -shaped low torque tapping screw
・ Reduces torque at the time of conclusion and improves work efficiency
■ Examples of use
・ Used part & target product: Power station outer wall (H -shaped steel plate thickness 6-10mm) / Metal sedating installation
・ Reason for adoption: corrosion resistance, high strength, workability, cost reduction
・ Use screws: Excel-550 Hexagonal Sun lock 6 × 35 ・ Excel-550 Hexagon 6 × 25
* Can be directly driven into a 10mm steel plate without a lower hole.
Recommended driver
■ Makita Co., Ltd.
・ Rechargeable screw driver: FS230DRJX (M4 / M5)
・ Tex screw driver: 6801NN (M6)
■ Hitachi Institute of Technology Co., Ltd.
Tex driver:
・ W 6m (M6)
・ W 6m (L) (M6)
・ W 6MV2 (M6)
・ W 6vh (M6)
・ W 8V (M8)
■ Precautions for use
・ Please use the screw suitable for the conclusion.
・ Please refer to the applicable plate thickness.
・ Do not approach your hands or face to the screws and chips during the rotation.
・ Do not touch the screw immediately after tightening, as it is very hot.
・ Do not use an impact driver to tighten.
-
-
Product
Drill blades corresponding to thick plates and low torque torque torque torque screw screw Excel (Excel) -550 thick plate