ALC version dedicated stainless steel fastener ALINC® (Arinko)
Maru Emmako Co., Ltd.
About This Product
■ Features
・ High holding power
・ Push the cut powder inward to make a reliable screw.
・ Because the first mountain is a perfect screw mountain, it can be bite and can screw with a small thrust (installation work time is greatly reduced).
・ No lower holes are required (decrease in man -hours)
・ Since there is almost no cutting powder, there is little dirt.
・ Replacement of members (re -twist is also possible)
・ You can reuse (can be screwed into a different place)
・ Because it is stainless steel, rust is hard to occur.
・ It can be easily installed to corners that were difficult to install.
■ Materials
Austenite stainless steel (SUSXM7)
* The shape of the head is based on "truss head with cross -hole". Other head shapes, rescue shapes, call lengths, and screw managers can be produced
■ Precautions for use
・ Please use the tightening work in the low rotation number.
・ Electric drivers are recommended to have torque control.
・ Be sure to screw it into the unnecessary ALC version before work, check the appropriate rotation speed and tighten torque, and use it.
・ Apply more torque and do not spin the screw.
・ Do not use an impact driver for tightening.
-
Product
ALC version dedicated stainless steel fastener ALINC® (Arinko)
-
Handling Company
Maru Emmako Co., Ltd.
7 Models of ALC version dedicated stainless steel fastener ALINC® (Arinko)
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Quantity | Rotation speed (rotation/minute) | Size head -shaped plate head diameter (mm) | Size head shape truss head diameter (mm) | Tightening torque (N / M) |
|---|---|---|---|---|---|---|---|
|
|
ALINC® called the Diameter M4 |
Available upon quote | - | 500 | 7 | 8.1 | 1.5 or less |
|
|
ALINC® called the Diameter M5 |
Available upon quote | - | 500 | 9 | 10.6 | 1.5-2.5 |
|
|
ALINC® called the Diameter M6 |
Available upon quote | - | 500 | Ten | 11.8 | 2.5-4.9 |
|
|
ALINC® called the Diameter M8 |
Available upon quote | - | 500 | 12 | 14 | 3.9-7.8 |
|
|
Arrincobristar Pack Call for the diameter M4 |
Available upon quote | 60-70 | - | 7 | 8.1 | - |
|
|
Arrincobristar Pack Calling M5 |
Available upon quote | 40-60 | - | 9 | 10.6 | - |
|
|
Arrincobristar Pack Calling Diameter M6 |
Available upon quote | 30 ~ 50 | - | Ten | 11.8 | - |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Maru Emmako Co., Ltd.
View more products of Maru Emmako Co., Ltd.
About Company Handling This Product
- Japan
- Since 1951
- 200 employees