All Categories

History

  1. Metoree
  2. Clamps & Fasteners
  3. Toolholders
  4. Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact (Sunk Japan Co., Ltd.)
Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact-Tendo EC CAT40 ø3/4 "x4"
Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact-TENDO EC CAT40 ø3/4 "x64.5
Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact-TENDO EC HSK-A50 ø20X94
Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact-Tendo EC HSK-A63 ø3/4 "x80
Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact-Sunk Japan Co., Ltd.

Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact
Sunk Japan Co., Ltd.

About This Product

The compact Tendo E -hydraulic extension tool holder is overwhelmingly strong in milling, drilling, rima processing, and screws. Moreover, up to 300 % can extend the life of the blade. This is proved by research conducted by the Institute of Production Science at the University of Karl Slue (KIT). Advantages and benefits

■ High torque corresponding to maximum mass production cutting

A compact design guarantees a high torque transmission with strong holding power.

■ Balance fine -tuned by default settings

The balance grade at 25,000 RPM achieves G 2.5 and is suitable for high -speed rotation and HPC/HSC Machining Center.

■ High adaptability

Intermediate sleeve with slot or cooling solution that enables various diameter clamping

■ Excellent vibration attenuation mechanism

Prevents micro dust, maintains the work surface in the best condition, protects the machine axis, and extends the tool -resistant life, which can reduce costs.

■ Permanent swing and repetition accuracy are 0.003 mm or less

Equal cutting operation, long tool -resistant life, reduced cost of new tool grinding and procurement

■ You can exchange tools with micron accuracy in just a few seconds without peripheral devices.

In addition to the time saving effect due to shortening of the setup time, the addition of an investment or energy by adding a clamping device is incurred.

■ Removes dirt by the internal groove and keeps the transmission torque

Oil, grease or lubricating oil residue can be removed in foreign substances, maintaining a dry clamping surface

■ Wide compatibility

Demonstrates the highest performance in combination with Tendo SVL and TRIBOS SVL extension

■ Rigid in the high diameter direction

Removaling speed with high form and optimized removal speed during metal cutting processing processes (eg, 400 cm³/minutes for 42CRMO4)

■ All commercially available shank types are available

Smooth cylindrical shank, DIN 1835 and DIN 6535 HA conformity Shank form A form AB: Pulled with full seat and cylindrical shank, DIN 1835 and DIN 6535 HB compatible Shank Form B Form B: Side side pulling surface, din 1835 Compatible Sunk Form B Form E: Tilt Clamp, DIN 1835 and DIN 6535 HE Compatible Forms E Options, others Realizes flexible clamp areas by using the intermediate sleeve With the intermediate sleeve, only one tool holder allows you to clamp with various diameter sunks of 3 to 32 mm. Farewell for customers: Reducing costs and improving groom in shank diameter. * There are other part numbers.

  • Product

    Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact

Share this product


170+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact

Click on the part number for more information about each product

Image Part Number Price (excluding tax) technology series Toolbar interface Standard of tool holder Clamp Kai D1 D2 (mm) D6 (mm) Proper length L1 (mm) L2 (mm) L3 (mm) L4 (mm) G Minimum torque (NM) Weight (kg)
Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact-Part Number-Tendo EC CAT40 ø3/4 "x4"

Tendo EC CAT40 ø3/4 "x4"

Available upon quote

Hydraulic expansion tool holder

Tendo E Compact

CAT 40

ASME B5.50

3/4 "

49

38

101.6

51

10

82.55

M8 × 1

520

1.8

Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact-Part Number-TENDO EC CAT40 ø3/4 "x64.5

TENDO EC CAT40 ø3/4 "x64.5

Available upon quote

Hydraulic expansion tool holder

Tendo E Compact

CAT 40

ASME B5.50

3/4 "

49.25

38

64.5

51

10

45.45

M8 × 1

520

1.3

Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact-Part Number-Tendo EC CAT40 ø20X4 "

Tendo EC CAT40 ø20X4 "

Available upon quote

Hydraulic expansion tool holder

Tendo E Compact

CAT 40

ASME B5.50

20mm

49

38

101.6

51

10

82.55

M8 × 1

520

1.8

Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact-Part Number-Tendo EC CAT40 ø20X64.5

Tendo EC CAT40 ø20X64.5

Available upon quote

Hydraulic expansion tool holder

Tendo E Compact

CAT 40

ASME B5.50

20mm

49.25

38

64.5

51

10

45.45

M8 × 1

520

1.3

Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact-Part Number-Tendo EC CAT50 ø1 1/4 "X6"

Tendo EC CAT50 ø1 1/4 "X6"

Available upon quote

Hydraulic expansion tool holder

Tendo E Compact

CAT 50

ASME B5.50

1 1/4 "

69.5

58.5

152.4

61

10

133.35

M8 × 1

900

6

Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact-Part Number-Tendo EC CAT50 ø1 1/4 "x81

Tendo EC CAT50 ø1 1/4 "x81

Available upon quote

Hydraulic expansion tool holder

Tendo E Compact

CAT 50

ASME B5.50

1 1/4 "

72

58.5

81

61

10

61.95

M8 × 1

900

4.1

Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact-Part Number-Tendo EC CAT50 ø32X6 "

Tendo EC CAT50 ø32X6 "

Available upon quote

Hydraulic expansion tool holder

Tendo E Compact

CAT 50

ASME B5.50

32mm

69.5

58.5

152.4

61

10

133.35

M8 × 1

900

6

Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact-Part Number-Tendo EC CAT50 ø32X81

Tendo EC CAT50 ø32X81

Available upon quote

Hydraulic expansion tool holder

Tendo E Compact

CAT 50

ASME B5.50

32mm

72

58.5

81

61

10

61.95

M8 × 1

900

4.1

Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact-Part Number-TENDO EC HSK-A50 ø20X94

TENDO EC HSK-A50 ø20X94

Available upon quote

Hydraulic expansion tool holder

Tendo E Compact

HSK-A 50

Din ISO 12164-1

20mm

42

38

94

52.5

-

68

-

520

1.32

Optimal hydraulic expansion tool holder, optimal for milling processing, drill processing, rima processing, etc. Tendo e compact-Part Number-Tendo EC HSK-A63 ø3/4 "x80

Tendo EC HSK-A63 ø3/4 "x80

Available upon quote

Hydraulic expansion tool holder

Tendo E Compact

HSK-A 63

Din ISO 12164-1

3/4 "

52.5

38

80

51

10

54

M8 × 1

520

1.3

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Low load, high quality knurling QUICK Cutting knurling tool Flat knurling for small diameter machining C601-08,10,12,16-N-Yamada Machine Tool Co., Ltd.

Low load, high quality knurling QUICK Cutting knurling tool Flat knurling for small diameter machining C601-08,10,12,16-N

Yamada Machine Tool Co., Ltd.

4.5

130+ people viewing

Last viewed: 19 hours ago

Response time: 11.39 hours

Toolholders

8 models listed

Quick change collet chuck (for lathe)-NK Works Co., Ltd.

Quick change collet chuck (for lathe)

NK Works Co., Ltd.

520+ people viewing

Response time: 27.45 hours

Toolholders

3 models listed

SSW (Synchronized Stir Welding) Tool Holder-Keihin Ramtech Co., Ltd.

SSW (Synchronized Stir Welding) Tool Holder

Keihin Ramtech Co., Ltd.

430+ people viewing

Response time: 0.70 hours

Toolholders
NC Touring Super Titite Lock Milling Chuck-Saiyasu Co., Ltd.

NC Touring Super Titite Lock Milling Chuck

Saiyasu Co., Ltd.

140+ people viewing

Last viewed: 8 hours ago

Response time: 56.58 hours

Toolholders

30 models listed

NC Touring height adjustment type Collet Holder-Saiyasu Co., Ltd.

NC Touring height adjustment type Collet Holder

Saiyasu Co., Ltd.

100+ people viewing

Response time: 56.58 hours

Toolholders

10 models listed

Collet holder for height adjustable drill-NT Tools Co., Ltd.

Collet holder for height adjustable drill

NT Tools Co., Ltd.

400+ people viewing

Last viewed: 16 hours ago

Response time: 70.44 hours

Toolholders

3 models listed

Interior ALHIDE paper holder-Almetax Co., Ltd.

Interior ALHIDE paper holder

Almetax Co., Ltd.

350+ people viewing

Response time: 424.77 hours

Toolholders

3 models listed

NC Touring "R" Zero Holder-Saiyasu Co., Ltd.

NC Touring "R" Zero Holder

Saiyasu Co., Ltd.

120+ people viewing

Last viewed: 15 hours ago

Response time: 56.58 hours

Toolholders

10 models listed

Interior ALHIDE paper storage-Almetax Co., Ltd.

Interior ALHIDE paper storage

Almetax Co., Ltd.

330+ people viewing

Last viewed: 8 hours ago

Response time: 424.77 hours

Toolholders

3 models listed

NC Touring Slim Hide Ro Chuck-Saiyasu Co., Ltd.

NC Touring Slim Hide Ro Chuck

Saiyasu Co., Ltd.

110+ people viewing

Last viewed: 1 hour ago

Response time: 56.58 hours

Toolholders

20 models listed

Interior ALHIDE towel bar S-Almetax Co., Ltd.

Interior ALHIDE towel bar S

Almetax Co., Ltd.

340+ people viewing

Response time: 424.77 hours

Toolholders

3 models listed

Milling holder and tooling for Swiss type automatic lathe Himatec Tool holder for automatic lathe-Yamada Machine Tool Co., Ltd.

Milling holder and tooling for Swiss type automatic lathe Himatec Tool holder for automatic lathe

Yamada Machine Tool Co., Ltd.

4.5

440+ people viewing

Last viewed: 1 hour ago

Response time: 11.39 hours

Toolholders

3 models listed

See More Toolholders Products

Other products of Sunk Japan Co., Ltd.

Reviews shown here are reviews of companies.

General-purpose 2-nail flat lines with high payloads using a large joe stroke, integrated sensor system, and Selation Guide-Sunk Japan Co., Ltd.

General-purpose 2-nail flat lines with high payloads using a large joe stroke, integrated sensor system, and Selation Guide

Sunk Japan Co., Ltd.

2520+ people viewing

Last viewed: 1 hour ago

Response time: 9.30 hours

Grippers

10 models listed

Highly versatile 2 -nail gripper EGK that realizes work diversity with maximum process reliability-Sunk Japan Co., Ltd.

Highly versatile 2 -nail gripper EGK that realizes work diversity with maximum process reliability

Sunk Japan Co., Ltd.

1370+ people viewing

Last viewed: 3 hours ago

Response time: 9.30 hours

Grippers

10 models listed

Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity-Sunk Japan Co., Ltd.

Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity

Sunk Japan Co., Ltd.

750+ people viewing

Last viewed: 5 hours ago

Response time: 9.30 hours

Grippers

10 models listed

Electric type 2 finger parallel gripper ELG with a long joe stroke, long finger use with a profile processed rail guide-Sunk Japan Co., Ltd.

Electric type 2 finger parallel gripper ELG with a long joe stroke, long finger use with a profile processed rail guide

Sunk Japan Co., Ltd.

700+ people viewing

Last viewed: 9 hours ago

Response time: 9.30 hours

Grippers

40 models listed

A large joe stroke, a profed rail guide to use a long finger, the air pressure type 2 finger parallel pLG PLG-Sunk Japan Co., Ltd.

A large joe stroke, a profed rail guide to use a long finger, the air pressure type 2 finger parallel pLG PLG

Sunk Japan Co., Ltd.

480+ people viewing

Last viewed: 7 hours ago

Response time: 9.30 hours

Grippers

40 models listed

General-purpose 2-nail flat opening and closing with a T slot guide JGP-P-Sunk Japan Co., Ltd.

General-purpose 2-nail flat opening and closing with a T slot guide JGP-P

Sunk Japan Co., Ltd.

330+ people viewing

Last viewed: 16 hours ago

Response time: 9.30 hours

Grippers

10 models listed

Multi-touse guide used general-purpose electric 2-claw flat opening and closing gripper PGN-PLUS-P that can also support high torque load-Sunk Japan Co., Ltd.

Multi-touse guide used general-purpose electric 2-claw flat opening and closing gripper PGN-PLUS-P that can also support high torque load

Sunk Japan Co., Ltd.

270+ people viewing

Last viewed: 19 hours ago

Response time: 9.30 hours

Grippers

30 models listed

Collaboration-type gripper 24V operation and digital I/O-used work certified electric type 2 claws flat opening and closing gripper co-act EGP-C-Sunk Japan Co., Ltd.

Collaboration-type gripper 24V operation and digital I/O-used work certified electric type 2 claws flat opening and closing gripper co-act EGP-C

Sunk Japan Co., Ltd.

500+ people viewing

Last viewed: 9 hours ago

Response time: 9.30 hours

Grippers

20 models listed

Long stroke gripper Lightweight profile rail guide and compatible servo motor electric 2 -claw flat line opening and closing gripper EGA-Sunk Japan Co., Ltd.

Long stroke gripper Lightweight profile rail guide and compatible servo motor electric 2 -claw flat line opening and closing gripper EGA

Sunk Japan Co., Ltd.

240+ people viewing

Response time: 9.30 hours

Grippers

40 models listed

Small 3 -nail opening and closing center gripper MPZ with a T -slot guide for small parts for small parts-Sunk Japan Co., Ltd.

Small 3 -nail opening and closing center gripper MPZ with a T -slot guide for small parts for small parts

Sunk Japan Co., Ltd.

220+ people viewing

Response time: 9.30 hours

Grippers

10 models listed

General-purpose long stroke gripper PZH-PLUS with a large movement volume and a large maximum torque due to the multi-coase guide-Sunk Japan Co., Ltd.

General-purpose long stroke gripper PZH-PLUS with a large movement volume and a large maximum torque due to the multi-coase guide

Sunk Japan Co., Ltd.

430+ people viewing

Last viewed: 30 minutes ago

Response time: 9.30 hours

Grippers

4 models listed

Cleaning device cleaning unit RGG with shank interface when cleaning of clamping devices or automatic driving of machineing centers-Sunk Japan Co., Ltd.

Cleaning device cleaning unit RGG with shank interface when cleaning of clamping devices or automatic driving of machineing centers

Sunk Japan Co., Ltd.

450+ people viewing

Last viewed: 9 hours ago

Response time: 9.30 hours

Grippers

View more products of Sunk Japan Co., Ltd.

About Company Handling This Product

Sunk Japan Co., Ltd.

  • Japan

Related search keywords

Toolholders
Toolholders　Sunk Japan Co., Ltd.
Sunk Japan Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree