Sealed type for lathes with built-in pendulum mechanism 6 Joe Power Chuck ROTA NCR-A-ROTA NCR-A 190 Z140-KV

Sealed type for lathes with built-in pendulum mechanism 6 Joe Power Chuck ROTA NCR-A-ROTA NCR-A 250 Z220-SV90 °

Sealed type for lathes with built-in pendulum mechanism 6 Joe Power Chuck ROTA NCR-A-ROTA NCR-A 315 Z220-SV90 °

Sealed type for lathes with built-in pendulum mechanism 6 Joe Power Chuck ROTA NCR-A-ROTA NCR-A 400 Z300-SV90 °

Sealed type for lathes with built-in pendulum mechanism 6 Joe Power Chuck ROTA NCR-A-ROTA NCR-A 630 Z520-SV90 °

Sealed type for lathes with built-in pendulum mechanism 6 Joe Power Chuck ROTA NCR-A-ROTA NCR-A 800 Z520-SV90 °

Sealed type for lathes with built-in pendulum mechanism 6 Joe Power Chuck ROTA NCR-A-ROTA NCR-A 1000 Z520-SV90 °

Sealed type for lathes with built-in pendulum mechanism 6 Joe Power Chuck ROTA NCR-A
Sunk Japan Co., Ltd.

Sunk Japan Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

13.4hours

Relatively Fast Response

About This Product

Shield 6 Power Chuck for Joe Lathe
A lathe -closed 6 -powered joe power chuck with a built -in pendulum mechanism, low -deformed clamping and maintenance intervals 3 times.

Advantages and benefits
■ Power chuck for closed lathesLarge maintenance interval

■ High quality request high -precision angle lever power chuckAchieve outstanding processing processes

■ High efficiency angle lever systemHigh -grown and highly processed clamp

■ The optimal jos support for the outer / inner diameter clamp by using a very long bass joe guideAchieves long life and high grant

■ Optimal lubricating systemRealizes high grooming strength consistently

■ Media feeds through (coolant or air) is built into chuck body as a standard optionAdaptability according to the application

■ Low heightUtilize the mechanical space to the fullest

■ Work clamps that are easy to deform with thin thicknessHigh -circular circular degree of work

■ Clamping of non -circular components is very accurateIdeal for casting

■ Top Joe hole by rotating ring / Slobe and optimize processingEasy to handle while hole in top joe

■ Polishing / baking all functional partsLong product life

Options, others
■ Sealed type for work clamp 6 Joe correction chuck that is thin and easy to deformSchunk Rota NCR-A consists of three pendos placed at 120 ° intervals inside and the central chuck piston. Each pendulum is connected to two base Joe. This allows you to position the work at the center of the six contact points. Six contact points can be prepared in pairs. Since the groom focuses on the center of the chuck, the ideal core is achieved without using the extra positioning mechanism.

Joe interfaces and pistons placed on the SCHUNK ROTA NCR-A will prevent grease from gradually being lost. This sticker also prevents cracks and dirt from entering the chuck body. This improves process reliability for lathe chucks, extends maintenance intervals, and reduces lubricating refueling and cleaning.

* There are other part numbers.

Model
There are 10 models for this product.

Product
Sealed type for lathes with built-in pendulum mechanism 6 Joe Power Chuck ROTA NCR-A

Handling Company
Sunk Japan Co., Ltd.

Categories

Clamps & Fasteners

Hydraulic Chucks

Clamps & Fasteners

Chucks

960+ people viewing

Last viewed: 2 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of Sealed type for lathes with built-in pendulum mechanism 6 Joe Power Chuck ROTA NCR-A

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Spindle type	Spindle size	Seration	Maximum RPM (1/min)	Most maximum personal (KN)	Maximum operation power (kn)	Stroke/Joe (mm)	Piston stroke (H) (mm)	Pendulone correction (mm)	Inertia moment (kgm²)	Gravity (kg)
ROTA NCR-A 190 Z140-KV	Available upon quote	ISO702-4	Nr.5 (Z140)	Tung and groove	4,000	36	twenty two	6	13.5	± 1	0.06	14
ROTA NCR-A 250 Z220-SV90 °	Available upon quote	ISO702-4	Nr.8 (Z220)	1/16 "x90 °	3,000	64	38	8	18.5	± 2	0.31	36
ROTA NCR-A-F 250 Z220-SV90 °	Available upon quote	ISO702-4	Nr.8 (Z220)	1/16 "x90 °	3,000	64	38	8	18.5	± 2	0.31	36
ROTA NCR-A 315 Z220-SV90 °	Available upon quote	ISO702-4	Nr.8 (Z220)	1/16 "x90 °	2,500	80	40	8	20	± 2	0.71	55
ROTA NCR-A-F 315 Z220-SV90 °	Available upon quote	ISO702-4	Nr.8 (Z220)	1/16 "x90 °	2,500	80	40	8	20	± 2	0.71	55
ROTA NCR-A 400 Z300-SV90 °	Available upon quote	ISO702-4	Nr.11 (Z300)	1/16 "x90 °	1,400	100	54	12	30	± 2.5	2.4	118
ROTA NCR-A 630 Z520-SV90 °	Available upon quote	ISO702-4	Nr.20 (Z520)	1/16 "x90 °	1,000	160	80	16	40	± 3.5	20	387
ROTA NCR-A-F 630 Z520-SV90 °	Available upon quote	ISO702-4	Nr.20 (Z520)	1/16 "x90 °	1,000	160	80	16	40	± 3.5	20	387
ROTA NCR-A 800 Z520-SV90 °	Available upon quote	ISO702-4	Nr.20 (Z520)	1/16 "x90 °	700	160	80	16	40	± 3.5	34	495
ROTA NCR-A 1000 Z520-SV90 °	Available upon quote	ISO702-4	Nr.20 (Z520)	3/32 "x90 °	600	300	150	twenty five	60	± 6	149	1,300

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Turtle chuck G series for hydraulic power chuck

Ohno Seiki Co., Ltd.

40+ people viewing

Last viewed: 2 hours ago

Response time: 21.88 hours

Hydraulic Chucks

2 models listed

Stable high precision Excellent vibration damping effect Wide variety GMR hydro chuck BT series

Pioneer Trading Co., Ltd.

40+ people viewing

Last viewed: 19 hours ago

Hydraulic Chucks

Stable high precision Excellent vibration damping effect Wide variety GSR slim hydro chuck BT series

Pioneer Trading Co., Ltd.

30+ people viewing

Last viewed: 1 minute ago

Hydraulic Chucks

Stable high precision Excellent vibration damping effect Wide variety GMR Hydro Chuck HSK series

Pioneer Trading Co., Ltd.

40+ people viewing

Last viewed: 40 minutes ago

Hydraulic Chucks

Stable high precision Excellent vibration damping effect Wide variety GMR long hydro chuck HSK series

Pioneer Trading Co., Ltd.

40+ people viewing

Last viewed: 8 minutes ago

Hydraulic Chucks

Stable high precision Excellent vibration damping effect Wide variety GSL slim hydro chuck HSK63A series

Pioneer Trading Co., Ltd.

40+ people viewing

Last viewed: 35 minutes ago

Hydraulic Chucks

Stable high precision Excellent vibration damping effect Wide variety GMR hydro chuck HSK series HSK40E/HSK50E

Pioneer Trading Co., Ltd.

50+ people viewing

Last viewed: 46 minutes ago

Hydraulic Chucks

NC Touring Slim Hide Ro Chuck

Saiyasu Co., Ltd.

450+ people viewing

Last viewed: 3 hours ago

Hydraulic Chucks

20 models listed

Long Joe Stroke High Powerful More Media Feed Through Lightweight 2 Power Chuck for Joe Lathe No Pen through Rota 2B

Sunk Japan Co., Ltd.

750+ people viewing

Last viewed: 43 minutes ago

Response time: 13.42 hours

Hydraulic Chucks

20 models listed

With a vibration mechanism that can clamp thin flesh parts by suppressing deformation 6 Joe Power Chuck No penetrating hole ROTA NCR

Sunk Japan Co., Ltd.

490+ people viewing

Last viewed: 11 hours ago

Response time: 13.42 hours

Hydraulic Chucks

6 models listed

3 claws/6 Large hydraulic chuck CVH series with cutting powder countermeasure cover suitable for use on a standing lathe

Kawatatek Co., Ltd.

560+ people viewing

Last viewed: 2 hours ago

Response time: 15.41 hours

Hydraulic Chucks

24 models listed

Improving sealability with large joe stroke Lightweight large 3 claw power chuck No penetrating hole ROTA NCO2

Sunk Japan Co., Ltd.

460+ people viewing

Last viewed: 20 hours ago

Response time: 13.42 hours

Hydraulic Chucks

20 models listed

See More Hydraulic Chucks Products

Other products of Sunk Japan Co., Ltd.

Reviews shown here are reviews of companies.

General-purpose 2-nail flat lines with high payloads using a large joe stroke, integrated sensor system, and Selation Guide

Sunk Japan Co., Ltd.

390+ people viewing

Last viewed: 1 hour ago

Response time: 13.42 hours

Grippers

10 models listed

Highly versatile 2 -nail gripper EGK that realizes work diversity with maximum process reliability

Sunk Japan Co., Ltd.

500+ people viewing

Last viewed: 7 hours ago

Response time: 13.42 hours

Grippers

10 models listed

Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity

Sunk Japan Co., Ltd.

460+ people viewing

Last viewed: 1 hour ago

Response time: 13.42 hours

Grippers

10 models listed

Electric type 2 finger parallel gripper ELG with a long joe stroke, long finger use with a profile processed rail guide

Sunk Japan Co., Ltd.

750+ people viewing

Last viewed: 5 hours ago

Response time: 13.42 hours

Grippers

30 models listed

A large joe stroke, a profed rail guide to use a long finger, the air pressure type 2 finger parallel pLG PLG

Sunk Japan Co., Ltd.

540+ people viewing

Last viewed: 7 hours ago

Response time: 13.42 hours

Grippers

20 models listed

General-purpose 2-nail flat opening and closing with a T slot guide JGP-P

Sunk Japan Co., Ltd.

1050+ people viewing

Last viewed: 47 minutes ago

Response time: 13.42 hours

Grippers

10 models listed

Multi-touse guide used general-purpose electric 2-claw flat opening and closing gripper PGN-PLUS-P that can also support high torque load

Sunk Japan Co., Ltd.

800+ people viewing

Last viewed: 15 hours ago

Response time: 13.42 hours

Grippers

20 models listed

Collaboration-type gripper 24V operation and digital I/O-used work certified electric type 2 claws flat opening and closing gripper co-act EGP-C

Sunk Japan Co., Ltd.

410+ people viewing

Last viewed: 6 hours ago

Response time: 13.42 hours

Grippers

10 models listed

Long stroke gripper Lightweight profile rail guide and compatible servo motor electric 2 -claw flat line opening and closing gripper EGA

Sunk Japan Co., Ltd.

400+ people viewing

Last viewed: 7 hours ago

Response time: 13.42 hours

Grippers

20 models listed

Small 3 -nail opening and closing center gripper MPZ with a T -slot guide for small parts for small parts

Sunk Japan Co., Ltd.

370+ people viewing

Last viewed: 17 hours ago

Response time: 13.42 hours

Grippers

10 models listed

General-purpose long stroke gripper PZH-PLUS with a large movement volume and a large maximum torque due to the multi-coase guide

Sunk Japan Co., Ltd.

510+ people viewing

Last viewed: 16 hours ago

Response time: 13.42 hours

Grippers

4 models listed

Cleaning device cleaning unit RGG with shank interface when cleaning of clamping devices or automatic driving of machineing centers

Sunk Japan Co., Ltd.

190+ people viewing

Response time: 13.42 hours

Grippers

View more products of Sunk Japan Co., Ltd.

About Company Handling This Product

Sunk Japan Co., Ltd.

Response Rate

100.0%

Response Time

13.4hrs

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Sealed type for lathes with built-in pendulum mechanism 6 Joe Power Chuck ROTA NCR-A Sunk Japan Co., Ltd.

Sunk Japan Co., Ltd.'s Response Status

About This Product

■ Power chuck for closed lathes

■ High quality request high -precision angle lever power chuck

■ High efficiency angle lever system

■ The optimal jos support for the outer / inner diameter clamp by using a very long bass joe guide

■ Optimal lubricating system

■ Media feeds through (coolant or air) is built into chuck body as a standard option

■ Low height

■ Work clamps that are easy to deform with thin thickness

■ Clamping of non -circular components is very accurate

■ Top Joe hole by rotating ring / Slobe and optimize processing

■ Polishing / baking all functional parts

■ Sealed type for work clamp 6 Joe correction chuck that is thin and easy to deform

10 Models of Sealed type for lathes with built-in pendulum mechanism 6 Joe Power Chuck ROTA NCR-A

Customers who viewed this product also viewed

Other products of Sunk Japan Co., Ltd.

About Company Handling This Product

Related search keywords

Sealed type for lathes with built-in pendulum mechanism 6 Joe Power Chuck ROTA NCR-A
Sunk Japan Co., Ltd.