General-purpose turning unit SRU-PLUS that can be used for air pressure type turning and rotation movement-SRU-PLUS 20-S-90-3

General-purpose turning unit SRU-PLUS that can be used for air pressure type turning and rotation movement
Sunk Japan Co., Ltd.

Sunk Japan Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

13.4hours

Relatively Fast Response

About This Product

Advantages and benefits
■ Series lineup that is finely classified according to the torque levelPrepare the size required for various applications as standard products

■ Selection of turning angle 90 ° / 180 °You can freely select the rotation angle. We will also provide angles for specific applications according to your request.

■ Stop position adjustment rangeYou can select +3 °/-3 ° (small) or +3 °/-90 ° (large)

■ You can select the center position of the air pressure type or the lock typeThe center position of the lock type can be unlocked at the time of load. With two types of central positions, it can always rotate in one direction.

■ Fluid feeds through that can be used for gas, liquid, and vacuumThere is no disturbing hose piping

■ Electric turning feeds throughSensor, actuator or bus signal (optional) long life and high reliability feeds through

■ Select an electronic magnet sensor or an induced proximity sensorCompatible with very abundant position monitors

■ Replaced screw -in type positioning sleeve (bushing)Easy to maintain even after millions of cycles and can be replaced quickly

■ Extension of the seriesCompatible with the SRU-mini series, support for a wide range of applications

Options, others
■ You can attach additional external shock absorbers, especially for turning movements that require a particularly strong buffer function. The groundbreaking sleeve technology allows you to quickly and quickly provide a special turning angle of over 180 °. Please feel free to contact us for support.
■ At request, we can also provide an electric feed -through with an M5 or M12 connection socket. At request, you can use the electric feed -through to send the bus signal.
Note that all air pressure actuators require appropriate emergency stop procedures (such as controlled operation stops, etc.) and resumed procedures (such as a pressure increase valve, appropriate valve switching sequence).

■ Removing the pressure supply connection without control may cause unexpected status and movement.
* There are other part numbers

Model
There are 10 models for this product.

Product
General-purpose turning unit SRU-PLUS that can be used for air pressure type turning and rotation movement

Handling Company
Sunk Japan Co., Ltd.

Categories

Drive Mechanisms & Components

Rotary Actuators

400+ people viewing

Last viewed: 3 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

10 Models of General-purpose turning unit SRU-PLUS that can be used for air pressure type turning and rotation movement

Click on the part number for more information about each product

Part Number	Price (excluding tax)	End position damper	Rotation angle (°)	Stop position adjustment range (°)	Torque (NM)	Number of intermediate positions	IP protection grade	Weight (kg)	Fluid consumption (2X rating angle) (cm³)	Called operation pressure (BAR)	Lowest operation pressure (BAR)	Maximum activation pressure (bar)	Connection hose diameter	Minimum peripheral temperature (℃)	Maximum surrounding temperature (℃)	Repeated accuracy (°)	Length x (mm)	Width Y (mm)	Height Z (mm)	Torque MY Maximum (NM)	Maximum axis direction FZ (maximum) (n)	Version with speed attenuation	Version with a fluid feed through	Version with electric feed through	Version with adapter	Central position adjustment range (°)
SRU-PLUS 20-S-90-3	Available upon quote	Damper elastomer	90	3	3.4	none	67	1.2	36	6	Four	8	6x3.9x1.05	Five	60	0.05	158.9	76	47	10.4	800	can be	-	-	-	-
SRU-PLUS 20-S-90-3-4	Available upon quote	Damper elastomer	90	3	3	none	67	1.4	36	6	Four	8	6x3.9x1.05	Five	60	0.05	158.9	76	63.5	10.4	800	can be	can be	-	-	-
SRU-PLUS 20-S-90-3-4-M8	Available upon quote	Damper elastomer	90	3	3	none	67	2.05	36	6	Four	8	6x3.9x1.05	Five	60	0.05	158.9	76	109.6	10.4	800	can be	can be	can be	-	-
SRU-PLUS 20-S-90-3-4-M8-as	Available upon quote	Damper elastomer	90	3	3	none	67	2.05	36	6	Four	8	6x3.9x1.05	Five	60	0.05	158.9	76	121	10.4	800	can be	can be	can be	can be	-
SRU-PLUS 20-S-180-3	Available upon quote	Damper elastomer	180	3	3.4	none	67	1.2	60	6	Four	8	6x3.9x1.05	Five	60	0.05	158.9	76	47	10.4	800	can be	-	-	-	-
SRU-PLUS 20-S-180-3-4	Available upon quote	Damper elastomer	180	3	3	none	67	1.4	60	6	Four	8	6x3.9x1.05	Five	60	0.05	158.9	76	63.5	10.4	800	can be	can be	-	-	-
SRU-PLUS 20-S-180-3-4-M8	Available upon quote	Damper elastomer	180	3	3	none	67	2.05	60	6	Four	8	6x3.9x1.05	Five	60	0.05	158.9	76	109.6	10.4	800	can be	can be	can be	-	-
SRU-PLUS 20-S-180-3-4-M8-as	Available upon quote	Damper elastomer	180	3	3	none	67	2.05	60	6	Four	8	6x3.9x1.05	Five	60	0.05	158.9	76	121	10.4	800	can be	can be	can be	can be	-
SRU-PLUS 20-S-180-3-M	Available upon quote	Damper elastomer	180	3	3.4	1XM (empty pressure type)	67	1.55	60	6	Four	8	6x3.9x1.05	Five	60	0.05	194.9	76	47	10.4	800	can be	-	-	-	3
SRU-PLUS 20-S-180-3-M-4	Available upon quote	Damper elastomer	180	3	3	1XM (empty pressure type)	67	1.75	60	6	Four	8	6x3.9x1.05	Five	60	0.05	194.9	76	63.5	10.4	800	can be	can be	-	-	3

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Hydraulic and pneumatic equipment Rotary actuator High rotor/PRN series Compact high rotor

Marushin Co., Ltd.

280+ people viewing

Last viewed: 14 minutes ago

Response time: 27.26 hours

Rotary Actuators

20 models listed

Hydraulic and pneumatic equipment Rotary actuator High rotor/PRN series High rotor

Marushin Co., Ltd.

300+ people viewing

Last viewed: 43 minutes ago

Response time: 27.26 hours

Rotary Actuators

8 models listed

Valve Large actuator Automax

110+ people viewing

Rotary Actuators

3 models listed

Rotary actuator High output type Built-in hydro cushion type RU30

NKE Corporation

170+ people viewing

Last viewed: 43 minutes ago

Response time: 9.96 hours

Rotary Actuators

6 models listed

Rotary actuator High output type Hydro cushion built-in type RU40/60/80

NKE Corporation

350+ people viewing

Last viewed: 43 minutes ago

Response time: 9.96 hours

Rotary Actuators

18 models listed

Rotary actuator low output type rack and pinion type RM15/20

NKE Corporation

380+ people viewing

Last viewed: 43 minutes ago

Response time: 9.96 hours

Rotary Actuators

16 models listed

Rotary actuator low output type rack and pinion type RM40

NKE Corporation

110+ people viewing

Last viewed: 24 minutes ago

Response time: 9.96 hours

Rotary Actuators

4 models listed

Rotary actuator low output type rack and pinion type RT20W

NKE Corporation

140+ people viewing

Last viewed: 13 minutes ago

Response time: 9.96 hours

Rotary Actuators

6 models listed

General -purpose rotation unit SRM that can be used for air pressure type turning and rotation movement

Sunk Japan Co., Ltd.

530+ people viewing

Last viewed: 9 minutes ago

Response time: 13.42 hours

Rotary Actuators

10 models listed

Simultaneous work loading / unloading that integrates fluid and electrical feeds-through is a general-purpose turning head SRH-PLUS-D

Sunk Japan Co., Ltd.

330+ people viewing

Last viewed: 3 hours ago

Response time: 13.42 hours

Rotary Actuators

7 models listed

General-purpose turning unit SRU-PLUS-D that can be used for air pressure type turning and rotation movement

Sunk Japan Co., Ltd.

540+ people viewing

Last viewed: 19 hours ago

Response time: 13.42 hours

Rotary Actuators

10 models listed

Lightweight, high-speed small turn unit SRU-mini with abundant options such as fluid feeds through and hydraulic damping

Sunk Japan Co., Ltd.

490+ people viewing

Last viewed: 13 seconds ago

Response time: 13.42 hours

Rotary Actuators

10 models listed

See More Rotary Actuators Products

Other products of Sunk Japan Co., Ltd.

Reviews shown here are reviews of companies.

General-purpose 2-nail flat lines with high payloads using a large joe stroke, integrated sensor system, and Selation Guide

Sunk Japan Co., Ltd.

390+ people viewing

Last viewed: 6 minutes ago

Response time: 13.42 hours

Grippers

10 models listed

Highly versatile 2 -nail gripper EGK that realizes work diversity with maximum process reliability

Sunk Japan Co., Ltd.

500+ people viewing

Last viewed: 27 minutes ago

Response time: 13.42 hours

Grippers

10 models listed

Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity

Sunk Japan Co., Ltd.

460+ people viewing

Last viewed: 27 minutes ago

Response time: 13.42 hours

Grippers

10 models listed

Electric type 2 finger parallel gripper ELG with a long joe stroke, long finger use with a profile processed rail guide

Sunk Japan Co., Ltd.

750+ people viewing

Last viewed: 27 minutes ago

Response time: 13.42 hours

Grippers

30 models listed

A large joe stroke, a profed rail guide to use a long finger, the air pressure type 2 finger parallel pLG PLG

Sunk Japan Co., Ltd.

540+ people viewing

Last viewed: 28 minutes ago

Response time: 13.42 hours

Grippers

20 models listed

General-purpose 2-nail flat opening and closing with a T slot guide JGP-P

Sunk Japan Co., Ltd.

1050+ people viewing

Last viewed: 2 hours ago

Response time: 13.42 hours

Grippers

10 models listed

Multi-touse guide used general-purpose electric 2-claw flat opening and closing gripper PGN-PLUS-P that can also support high torque load

Sunk Japan Co., Ltd.

800+ people viewing

Last viewed: 8 hours ago

Response time: 13.42 hours

Grippers

20 models listed

Collaboration-type gripper 24V operation and digital I/O-used work certified electric type 2 claws flat opening and closing gripper co-act EGP-C

Sunk Japan Co., Ltd.

410+ people viewing

Last viewed: 8 hours ago

Response time: 13.42 hours

Grippers

10 models listed

Long stroke gripper Lightweight profile rail guide and compatible servo motor electric 2 -claw flat line opening and closing gripper EGA

Sunk Japan Co., Ltd.

400+ people viewing

Last viewed: 27 minutes ago

Response time: 13.42 hours

Grippers

20 models listed

Small 3 -nail opening and closing center gripper MPZ with a T -slot guide for small parts for small parts

Sunk Japan Co., Ltd.

370+ people viewing

Last viewed: 10 hours ago

Response time: 13.42 hours

Grippers

10 models listed

General-purpose long stroke gripper PZH-PLUS with a large movement volume and a large maximum torque due to the multi-coase guide

Sunk Japan Co., Ltd.

510+ people viewing

Last viewed: 8 hours ago

Response time: 13.42 hours

Grippers

4 models listed

Cleaning device cleaning unit RGG with shank interface when cleaning of clamping devices or automatic driving of machineing centers

Sunk Japan Co., Ltd.

190+ people viewing

Response time: 13.42 hours

Grippers

View more products of Sunk Japan Co., Ltd.

About Company Handling This Product

Sunk Japan Co., Ltd.

Response Rate

100.0%

Response Time

13.4hrs

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

General-purpose turning unit SRU-PLUS that can be used for air pressure type turning and rotation movement Sunk Japan Co., Ltd.

Sunk Japan Co., Ltd.'s Response Status

About This Product

■ Series lineup that is finely classified according to the torque level

■ Selection of turning angle 90 ° / 180 °

■ Stop position adjustment range

■ You can select the center position of the air pressure type or the lock type

■ Fluid feeds through that can be used for gas, liquid, and vacuum

■ Electric turning feeds through

■ Select an electronic magnet sensor or an induced proximity sensor

■ Replaced screw -in type positioning sleeve (bushing)

■ Extension of the series

■ At request, we can also provide an electric feed -through with an M5 or M12 connection socket. At request, you can use the electric feed -through to send the bus signal.

■ Removing the pressure supply connection without control may cause unexpected status and movement.

10 Models of General-purpose turning unit SRU-PLUS that can be used for air pressure type turning and rotation movement

Customers who viewed this product also viewed

Other products of Sunk Japan Co., Ltd.

About Company Handling This Product

Related search keywords

General-purpose turning unit SRU-PLUS that can be used for air pressure type turning and rotation movement
Sunk Japan Co., Ltd.