High precision digital differential pressure gauge / drip-proof and dust-proof BOX KS3200-KS3200

High precision digital differential pressure gauge / drip-proof and dust-proof BOX KS3200-KS3200 in the BOX (brass)

High precision digital differential pressure gauge / drip-proof and dust-proof BOX KS3200-KS3200 Multi-BOX

High precision digital differential pressure gauge / drip-proof and dust-proof BOX KS3200
Krone Co., Ltd.

About This Product

■Summary・The digital differential pressure gauge KS3200 is a model that maintains the functionality, accuracy, and price of the long-proven KS2900, but uses a high-contrast LCD display for even higher visibility.
-The KS3200 has an innovative panel based on black with an emphasis on design, and has been designed and developed so that it can be easily installed from the front with a single touch.
・The range is 0-100Pa to 5,000Pa (differential pressure), ±100Pa to ±5,000Pa (compound pressure), and the analog output can be selected from two types: 4-20mA or 1-5V.
- Various settings can be easily made using the keys on the front of the panel. The KS3200, which has been developed with a variety of functions so that it can perform almost all types of micro-differential pressure measurement and control, can be used in a wide range of applications, from semiconductor manufacturing equipment to air conditioning monitoring and control.

■Product features・Short warm-up time
・Building a fail-safe function
・Energy saving by adopting LCD display
・With analog signal output
・High contrast LCD adopted
・Hysteresis and comparison delay setting possible
・Display rate time can be set
・Hi/Go/Lo comparison setting output possible

Overview of main setting functions
■Comparison (alarm) settingsSet the Hi and Lo values. You can also set Hi and Lo directions, hysteresis, output logic, comparison value delay, comparison output ON/OFF, etc.

■HysteresisChattering may occur when the actual pressure approaches or leaves the set Hi or Lo value. You can prevent this phenomenon by setting this value.

■Comparison value delay・If the actual pressure momentarily reaches the set Hi or Lo value, it may be difficult to operate immediately.
- By setting this value, the operation can be delayed. (See output mode example on the right)

■Forced zeroBy pressing the Up/Zero key on the panel, the zero point will be forcibly corrected.

■Sampling rate and display rateSetting this rate combination allows you to display average values, etc. Since the sampling rate is 0.1sec, for example, if you set the display rate to 0.5sec, the average value of 5 measurements will be displayed as a result. Various applications are possible.

■Moving averageThe moving average value for this set number of times will be displayed. It is especially applicable to pressure measurement and control that involves intense pulsation. (Can be set from 1 to 255 times)

■OthersThere are setting functions such as low cut rate, zero suppression, and minimum digit fixation. Please inquire for details.

Model
There are 4 models available for this product.

Product
High precision digital differential pressure gauge / drip-proof and dust-proof BOX KS3200

Handling Company
Krone Co., Ltd.

Categories

Meters & Instruments

Pressure Gauges

Meters & Instruments

Digital Differential Pressure Gauges

Meters & Instruments

Differential Pressure Guages

Meters & Instruments

Micro Pressure Gauges

850+ people viewing

Last viewed: 3 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

4 Models of High precision digital differential pressure gauge / drip-proof and dust-proof BOX KS3200

Click on the part number for more information about each product

Part Number	Price (excluding tax)	Pressure range (PA)	Measurement medium	accuracy	Bearing pressure	display	Input power supply voltage	power consumption	Electrical connection	Operating temperature limit	Used humidity range	Save temperature range	Protection grade	Mounting posture	mass	Standards / authentication	Analog output	Warming up	Operating temperature range	Operating humidity range	Storage temperature range	Protection class	Input power voltage	Mounting position	Pressure port	Pressure range (Pa)	Comparison setting output	Power consumption	Temperature characteristics	Measuring medium	Measurement method	Accuracy	Pressure resistance	Display	Display accuracy	Standards/Certification	Mass	Electrical connections	Case material	Fitting material
KS3200	Available upon quote	Deferment: 0-2500 0-1000 0-500 0-300 0-100 Compilation pressure: 0- ± 2500 0- ± 1000 0- ± 500 0- ± 300- ± 100	Air and non -corrosive gases (no dust)	Difference: 0-2,500 0-1,000 0-500 / ± 1.0% F.S. Difference: 0-300 / ± 1.5% F.S. Difference: 0-100 / ± 3.0% F.S. Compilation pressure: 0- ± 2,500 0- ± 1,000 0- ± 500 / ± 1.0% F.S. Compilation pressure: 0- ± 300 / ± 1.5% F.S. Compilation pressure: 0- ± 100 / ± 3.0% F.S.	Deferment: 0-2,500 / 7.5 kpa Deferment: 0-1,000 0-500 0-300 0-100 / 5.0 kpa Compilation pressure: 0- ± 2,500 / 7.5 kpa Compilation pressure: 0- ± 1,000 0- ± 500 0- ± 300 0- ± 100 / 5.0 kpa	Full 4 -digit LCD display Pressure display: 4 digits LCD (unit: PA) Comparison display: HI / LO / GO 3 points LCD display LO cut: There is a non -sensitive band setting function Forced zero: Push type forced zero function * Regular implementation (recommended)	DC12V or DC24V (± 10%)	1W (output 20mA, when backlight lighting) * Not included comparator output	8 PIN connector	0 ℃ ~ 50 ° C (no freezing)	35 % to 85 % (not condensation)	-20 ℃ ~ 70 ℃	IP40 (indoor specification)	Panel mounting (cut dimensions: 45.0W x 22.2h)	Approximately 40g	CE, UL, Rohs	4-20mA / 1-5V (optional)	5 minutes	0℃~50℃ (no freezing)	35%~85% (no condensation)	-20℃~70℃	IP40 (indoor specification)	DC12V or DC24V (±10%)	Panel installation (cut dimensions: 45.0W×22.2H)	Outer diameter: conical shape with inlet Φ2.1mm and maximum Φ3.5mm	Differential pressure: 0-5,000 0-2,500 0-1,000 0-500 0-300 0-100 compound pressure: ±5,000 ±2,500 ±1,000 ±500 ±300 ±100	NPN open collector, Hi/Lo/Go 3-point independent output / PNP (optional) / Relay	1W (output 20mA, when backlight is on) *Does not include comparator output	±0.15%FS/℃ or less (varies depending on measurement range)	Air and non-corrosive gases (no dust)	Semiconductor differential pressure method	±1.0% F.S.~	50 kPa ~ (varies depending on measurement range)	Full 4-digit LCD Hi/Lo/Go	Accuracy ±1digit	CE, UL, RoHS	Approximately 40g	8 pin connector	-	-
KS3200 in the BOX (brass)	Available upon quote	Deferment: 0-2500 0-1000 0-500 0-300 0-100 Compilation pressure: 0- ± 2500 0- ± 1000 0- ± 500 0- ± 300- ± 100	Air and non -corrosive gases (no dust)	Difference: 0-2,500 0-1,000 0-500 / ± 1.0% F.S. Difference: 0-300 / ± 1.5% F.S. Difference: 0-100 / ± 3.0% F.S. Compilation pressure: 0- ± 2,500 0- ± 1,000 0- ± 500 / ± 1.0% F.S. Compilation pressure: 0- ± 300 / ± 1.5% F.S. Compilation pressure: 0- ± 100 / ± 3.0% F.S.	Deferment: 0-2,500 / 7.5 kpa Deferment: 0-1,000 0-500 0-300 0-100 / 5.0 kpa Compilation pressure: 0- ± 2,500 / 7.5 kpa Compilation pressure: 0- ± 1,000 0- ± 500 0- ± 300 0- ± 100 / 5.0 kpa	Full 4 -digit LCD display Pressure display: 4 digits LCD (unit: PA) Comparison display: HI / LO / GO 3 points LCD display LO cut: There is a non -sensitive band setting function Forced zero: Push type forced zero function * Regular implementation (recommended)	DC12V or DC24V (± 10%)	1W (output 20mA, when backlight lighting) * Not included comparator output	8 PIN connector	0 ℃ ~ 50 ° C (no freezing)	85%RH or less (not condensation)	-20 ℃ ~ 70 ℃	IP65	nothing special	Approximately 730g	CE	4-20mA / 1-5V (optional)	5 minutes	0℃~50℃ (no freezing)	85%RH or less (no condensation)	-20℃~70℃	IP65	DC12V or DC24V (±10%)	Nothing in particular	Outer diameter: conical shape with inlet Φ2.1mm and maximum Φ3.5mm	Differential pressure: 0-5,000 0-2,500 0-1,000 0-500 0-300 0-100 Compound pressure: ±5,000 ±2,500 ±1,000 ±500 ±300 ±100	NPN open collector, Hi/Lo/Go 3-point independent output / PNP (optional) / Relay	1W (output 20mA, when backlight is on) *Does not include comparator output	±0.15% F.S. /℃ or less (varies depending on measurement range)	Air and non-corrosive gases (no dust)	Semiconductor differential pressure method	±1.0% F.S.~	50 kPa or more (varies depending on measurement range)	Full 4 digit LCD display Pressure display: 4 digits	Accuracy ±1digit	C.E.	Approximately 730g	8 pin connector	Polycarbonate	Brass
KS3200 in the BOX (SUS)	Available upon quote	Deferment: 0-2500 0-1000 0-500 0-300 0-100 Compilation pressure: 0- ± 2500 0- ± 1000 0- ± 500 0- ± 300- ± 100	Air and non -corrosive gases (no dust)	Difference: 0-2,500 0-1,000 0-500 / ± 1.0% F.S. Difference: 0-300 / ± 1.5% F.S. Difference: 0-100 / ± 3.0% F.S. Compilation pressure: 0- ± 2,500 0- ± 1,000 0- ± 500 / ± 1.0% F.S. Compilation pressure: 0- ± 300 / ± 1.5% F.S. Compilation pressure: 0- ± 100 / ± 3.0% F.S.	Deferment: 0-2,500 / 7.5 kpa Deferment: 0-1,000 0-500 0-300 0-100 / 5.0 kpa Compilation pressure: 0- ± 2,500 / 7.5 kpa Compilation pressure: 0- ± 1,000 0- ± 500 0- ± 300 0- ± 100 / 5.0 kpa	Full 4 -digit LCD display Pressure display: 4 digits LCD (unit: PA) Comparison display: HI / LO / GO 3 points LCD display LO cut: There is a non -sensitive band setting function Forced zero: Push type forced zero function * Regular implementation (recommended)	DC12V or DC24V (± 10%)	1W (output 20mA, when backlight lighting) * Not included comparator output	8 PIN connector	0 ℃ ~ 50 ° C (no freezing)	85%RH or less (not condensation)	-20 ℃ ~ 70 ℃	IP65	nothing special	Approximately 730g	CE	4-20mA / 1-5V (optional)	5 minutes	0℃~50℃ (no freezing)	85%RH or less (no condensation)	-20℃~70℃	IP65	DC12V or DC24V (±10%)	Nothing in particular	Outer diameter: conical shape with inlet Φ2.1mm and maximum Φ3.5mm	Differential pressure: 0-5,000 0-2,500 0-1,000 0-500 0-300 0-100 Compound pressure: ±5,000 ±2,500 0-±1,000 ±500 ±300 ±100	NPN open collector, Hi/Lo/Go 3-point independent output / PNP (optional) / Relay	1W (output 20mA, when backlight is on) *Does not include comparator output	±0.15% F.S. /℃ or less (varies depending on measurement range)	Air and non-corrosive gases (no dust)	Semiconductor differential pressure method	±1.0% F.S.~	50 kPa ~ (varies depending on measurement range)	Full 4-digit LCD display	Accuracy ±1digit	C.E.	Approximately 730g	8 pin connector	Polycarbonate	SUS
KS3200 Multi-BOX	Available upon quote	Deferment: 0-2500 0-1000 0-500 0-300 0-100 Compilation pressure: 0- ± 2500 0- ± 1000 0- ± 500 0- ± 300- ± 100	Air and non -corrosive gases (no dust)	Difference: 0-2,500 0-1,000 0-500 / ± 1.0% F.S. Difference: 0-300 / ± 1.5% F.S. Difference: 0-100 / ± 3.0% F.S. Compilation pressure: 0- ± 2,500 0- ± 1,000 0- ± 500 / ± 1.0% F.S. Compilation pressure: 0- ± 300 / ± 1.5% F.S. Compilation pressure: 0- ± 100 / ± 3.0% F.S.	Deferment: 0-2,500 / 7.5 kpa Deferment: 0-1,000 0-500 0-300 0-100 / 5.0 kpa Compilation pressure: 0- ± 2,500 / 7.5 kpa Compilation pressure: 0- ± 1,000 0- ± 500 0- ± 300 0- ± 100 / 5.0 kpa	Full 4 -digit LCD display Pressure display: 4 digits LCD (unit: PA) Comparison display: HI / LO / GO 3 points LCD display LO cut: There is a non -sensitive band setting function Forced zero: Push type forced zero function * Regular implementation (recommended)	-	10W * Not included comparator output	6 PIN Euro block connector	0 ℃ ~ 50 ° C (no freezing)	35 % to 85 % (not condensation)	-20 ℃ ~ 70 ℃	IP40 (indoor specification)	Panel mounting (cut dimensions: 45.0W x 22.2h)	Approximately 2.1kg	CE, UL, Rohs	4-20mA / 1-5V (optional)	5 minutes	0℃~50℃ (no freezing)	35%~85% (no condensation)	-20℃~70℃	IP40 (indoor specification)	-	Panel installation (cut dimensions: 45.0W×22.2H)	Outer diameter: conical shape with inlet Φ2.1mm and maximum Φ3.5mm	Differential pressure: 0-5,000 0-2,500 0-1,000 0-500 0-300 0-100 Compound pressure: ±5,000 ±2,500 ±1,000 ±500 ±300 ±100	NPN open collector, Hi/Lo/Go 3-point independent output / PNP (optional) / Relay	10W *Does not include comparator output	±0.15% F.S. /℃ or less (varies depending on measurement range)	Air and non-corrosive gases (no dust)	Semiconductor differential pressure method	±1.0% F.S. ~ (varies depending on measurement range)	50 kPa or more (varies depending on measurement range)	Full 4-digit LCD display	Accuracy ±1digit	CE, UL, RoHS	Approximately 2.1kg	6 pin euroblock connector	-	-

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Glycerin-filled brass Bourdon tube pressure gauge model 213.40

LCI Co., Ltd.

4.0

570+ people viewing

Last viewed: 11 minutes ago

Response time: 17.33 hours

Pressure Gauges

10 models listed

High precision digital pressure gauge KDM30

Krone Co., Ltd.

4.5

740+ people viewing

Last viewed: 8 hours ago

Response time: 8.43 hours

Pressure Gauges

15 models listed

Glycerin-filled stainless steel Bourdon tube pressure gauge model 213.53

LCI Co., Ltd.

4.0

470+ people viewing

Last viewed: 10 hours ago

Response time: 17.33 hours

Pressure Gauges

16 models listed

Glycerin-filled all-stainless steel Bourdon tube pressure gauge model 233.50

LCI Co., Ltd.

4.0

470+ people viewing

Last viewed: 13 hours ago

Response time: 17.33 hours

Pressure Gauges

8 models listed

Ultra-compact glycerin pressure gauge OPGΦ39

ASK Co., Ltd.

250+ people viewing

Last viewed: 1 hour ago

Response time: 11.32 hours

Pressure Gauges

3 models listed

Rhinos Orange Indef Neo EM-ID-M30S

Rhinos International Co., Ltd.

140+ people viewing

Last viewed: 6 hours ago

Pressure Gauges

2 models listed

General-purpose pressure gauge (star gauge)

Migishita seiki mfg.co.,ltd.

220+ people viewing

Last viewed: 34 minutes ago

Pressure Gauges

3 models listed

Small pressure gauge

Migishita seiki mfg.co.,ltd.

200+ people viewing

Last viewed: 17 hours ago

Pressure Gauges

2 models listed

Standard pressure gauge ST type

TAKASHIMAKEIKI Co.,LTD.

250+ people viewing

Last viewed: 6 hours ago

Pressure Gauges

2 models listed

Glycerin pressure gauge OPG Φ60/75/100

ASK Co., Ltd.

210+ people viewing

Last viewed: 23 hours ago

Response time: 11.32 hours

Pressure Gauges

2 models listed

A pressure gauge that can output signals and check pressure using contacts (switches) Bourdon tube pressure gauge with contacts PGS21/PGS23

LCI Co., Ltd.

4.0

310+ people viewing

Last viewed: 4 hours ago

Response time: 17.33 hours

Pressure Gauges

4 models listed

Easy tap water pressure measuring device

Shinwa Co., Ltd.

560+ people viewing

Response time: 16.71 hours

Pressure Gauges

4 models listed

See More Pressure Gauges Products

Other products of Krone Co., Ltd.

Reviews shown here are reviews of companies.

High precision digital pressure gauge KDM30

Krone Co., Ltd.

4.5

740+ people viewing

Last viewed: 8 hours ago

Response time: 8.43 hours

Pressure Gauges

15 models listed

View more products of Krone Co., Ltd.

About Company Handling This Product

Krone Co., Ltd.

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

High precision digital differential pressure gauge / drip-proof and dust-proof BOX KS3200 Krone Co., Ltd.

About This Product

■Summary

■Product features

■Comparison (alarm) settings

■Hysteresis

■Comparison value delay

■Forced zero

■Sampling rate and display rate

■Moving average

■Others

4 Models of High precision digital differential pressure gauge / drip-proof and dust-proof BOX KS3200

KS3200

KS3200 in the BOX (brass)

KS3200 in the BOX (SUS)

KS3200 Multi-BOX

Customers who viewed this product also viewed

Other products of Krone Co., Ltd.

About Company Handling This Product

Related search keywords

High precision digital differential pressure gauge / drip-proof and dust-proof BOX KS3200
Krone Co., Ltd.