Ask Holdings Co., Ltd.'s Response Status
This product is registered by Ask Holdings Co., Ltd..
About This Product
■ Characteristics
・ There are a wide variety of purposes and industries used, such as sending rollers for providing paper and fibers, inching rollers for offset printing models, water supply and water absorption rollers before and after cleaning processes for accurate products such as food processing and semiconductors. 。
・ We have a wealth of delivery track record from small lots to mass production, such as pressing, foaming, rubber lining, etc. using special jigs.
■ Main usage examples
・ Depending on the purpose of use, the recommended shafts and roller parts, material, hardness, surface shape, etc. will change significantly.
・ The general requirements are summarized below, so I would be grateful if you could refer to the development.
・ If you have any questions, please feel free to contact us.
■ Roller surface processing
・ The surface processing is performed according to the purpose of use, such as preventing slips on the transport belt, preventing meandering, increasing the total friction coefficient, increasing the flexibility, adjusting the amount of adhesive application, and extending the wrinkles of the film.
-The portrait processing is used as a coat roller depending on the shape and ratio of the mountain groove to increase the friction coefficient and prevent slip.
・ Yokomizo processing the roller flexibility and improving the bite.
・ Use it for drip and meandering prevention belt.
・ Helical processing prevents slip and stable rotation, such as a belt sander that is applied.
・ Diamond cut processing, improved flexibility, and stably sending out thin paper, film, etc.
・ Double helical processing prevents slip, meandering, and transports while stretching wrinkles.
・ Warm processing is sent out while correcting wrinkles without stiffness, such as paper and fabric.
-The crown processing may be performed to correct the deflection of the transport belt and prevent meandering of the conveyed object, and the pressure at the time of rolling is equally performed and the crown is performed so that the thickness of the rolling object is average.
-Taper crown processing is processed thicker and horizontally from both ends, so it can be transported with less meandering.
・ Warm processing is a process with a gentle curvature, and stable transport with low slip.
・ Reverse crown processing is finely processed from both ends to prevent the falling of the conveyed goods.
■ Roller shaft
In the case of rubber rollers, metal materials are generally used, but it is important to select the most suitable materials depending on the purpose and usage environment.
・ Stainless steel, aluminum, carbon steel, chrome molybdenum steel, FRP, C-FRP
-
-
Product
Produced roller products in line with the design from small lot to mass production
Share this product
