All Categories
History
Product
Connection cable for display (GOT) RS-485 connector for GT27/25 models<=>Relay terminal block with cable FA-LTBGT2R4CBL05Handling Company
Mitsubishi Electric Engineering Co., Ltd.Categories
| Image | Part Number | Price (excluding tax) | Overvoltage category | Cable type | Cable length | Unit installation (DIN rail) | Unit installation (screws) | Operating ambient temperature | Ambient humidity | Usage altitude | Usage atmosphere | Storage ambient temperature | Storage ambient humidity | Connected equipment | Connected device series | Pollution level | Precautions | Purpose | Terminal block type | Terminal block: terminal screw | Terminal block: Applicable wire, tightening torque | Deadline | Dielectric strength voltage, insulation resistance | Vibration resistance (if there is intermittent vibration) 5-8.4Hz | Vibration resistance (if there is intermittent vibration) 8.4~150Hz | Vibration resistance (if there is intermittent vibration) Number of sweeps | Vibration resistance (when there is continuous vibration) 5-8.4Hz | Vibration resistance (when there is continuous vibration) 8.4~150Hz | Shockproof | Product classification | Installation location | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FA-LTBGT2R4CBL05 |
$ 87.49〜 |
II or below |
RS-485 connector<=>Relay terminal block with cable |
0.5m |
Compatible DIN rail: TH35-7.5Fe, TH35-7.5AL (based on JIS C 2812) |
M4×0.7mm×8mm or more Tightening torque: 78~118N-cm (8~12kgf-cm) |
0~55℃ |
5~95%RH (no condensation) |
2,000m or less |
No corrosive gases |
-25~75℃ |
5~95%RH (no condensation) |
Display (GOT) |
GT27, GT25 |
2 or less |
When connecting a cable to the unit, push in the cable connector until the connector locks. This may cause poor contact. |
Wiring-saving/man-hour saving equipment |
Screw terminal type |
M3 regular screw, number of terminals: 20P, 7.62mm pitch |
0.3~2mm2 (when using crimp terminals), 50~75N-cm (5.2~7.6kgf-cm) |
〇 (prepared product) |
AC500V for 1 minute, 10MΩ or more (between all DC external terminals and ground) |
Single amplitude 3.5mm |
Acceleration 9.8m/s2 |
10 times each in X, Y, and Z directions |
Single amplitude 1.75mm |
Acceleration 4.9m/s2 |
147m/s2, 3 times each in X, Y, and Z directions (JIS B 3502, IEC61131-2 compliant) |
Relay terminal block with cable |
Inside the control panel |
Approximately 180 |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
