All Categories
History
Product
Relay unit general purpose 20P terminal block type FA-CTB20PHandling Company
Mitsubishi Electric Engineering Co., Ltd.Categories
Image | Part Number | Price (excluding tax) | Overvoltage category | Unit installation (DIN rail) | Unit installation (screws) | Operating ambient temperature | Ambient humidity | Usage altitude | Usage atmosphere | Storage ambient temperature | Storage ambient humidity | Connected equipment | Connected device series | Maximum working voltage | Maximum operating current | Pollution level | Score | Purpose | Terminal block type | Terminal block: terminal screw | Terminal block: Applicable wire, tightening torque | Deadline | Insulation resistance (initial) | Vibration resistance (if there is intermittent vibration) 5-8.4Hz | Vibration resistance (if there is intermittent vibration) 8.4~150Hz | Vibration resistance (if there is intermittent vibration) Number of sweeps | Vibration resistance (when there is continuous vibration) 5-8.4Hz | Vibration resistance (when there is continuous vibration) 8.4~150Hz | Shockproof | Withstand voltage | Product classification | Installation location |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
FA-CTB20P |
$ 27.89〜 |
II or below |
TH35-7.5Fe, TH35-7.5AL (compliant with JIS C 2812) |
M4×0.7mm×20mm or more Tightening torque: 78~118N-cm (8~12kgf-cm) |
0~55℃ |
5~95%RH (no condensation) |
2,000m or less |
No corrosive gases |
-25~75℃ |
5~95%RH (no condensation) |
Sequencer |
MELSEC iQ-R, MELSEC-Q, MELSEC-L |
DC121V/AC264V |
Each point: 5A |
2 or less |
20 points, general purpose 20 points |
Wiring-saving/man-hour saving equipment |
Screw terminal type |
M3 screw, number of terminals 20P, 7.62mm pitch, self-up screw with finger protection cover |
0.3~2mm2 (when using crimp terminals), 58.8~88.2N-cm (6~9kgf-cm) |
〇 (prepared product) |
100MΩ or more (at DC500V insulation resistance meter) |
Single amplitude 3.5mm |
Acceleration 9.8m/s2 |
10 times each in X, Y, and Z directions |
Single amplitude 1.75mm |
Acceleration 4.9m/s2 |
147m/s2, 3 times each in X, Y, and Z directions (JIS B 3502, IEC61131-2 compliant) |
Between live parts AC1,500V for 1 minute |
Relay terminal block for sequencer |
Inside the control panel |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.