All Categories
History
Product
Relay terminal block for sequencer Input/output unit Screw terminal type For MELSEC only 32 points 1 wire type Compact type FA-TBS32XYHandling Company
Mitsubishi Electric Engineering Co., Ltd.Categories
| Image | Part Number | Price (excluding tax) | Overvoltage category | Common method | Unit installation (DIN rail) | Unit installation (screws) | Operating ambient temperature | Ambient humidity | Usage altitude | Usage atmosphere | Storage ambient temperature | Storage ambient humidity | Rated voltage | Connected equipment | Connected device series | Maximum working voltage | Maximum operating current | Pollution level | Score | Purpose | Terminal block type | Terminal block: terminal screw | Terminal block: Applicable wire, tightening torque | Deadline | Vibration resistance (if there is intermittent vibration) 5-8.4Hz | Vibration resistance (if there is intermittent vibration) 8.4~150Hz | Vibration resistance (if there is intermittent vibration) Number of sweeps | Vibration resistance (when there is continuous vibration) 5-8.4Hz | Vibration resistance (when there is continuous vibration) 8.4~150Hz | Shockproof | Product classification | Installation location |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FA-TBS32XY |
$ 27.89〜 |
II or below |
32 points / (24V) common 1 point + (0V) common 1 point |
Compatible DIN rail: TH35-7.5Fe, TH35-7.5AL (based on JIS C 2812) |
M4×0.7mm×25mm or more Tightening torque: 78~118N-cm (8~12kgf-cm) |
0~55℃ |
5~95%RH (no condensation) |
2,000m or less |
No corrosive gas |
-25~75℃ |
5~95%RH (no condensation) |
DC24V |
Sequencer |
MELSEC iQ-R, MELSEC iQ-F, MELSEC-Q, MELSEC-F, MELSEC-L |
DC28.8V |
1A (each signal terminal), 2A (each power supply terminal) |
2 or less |
32 points |
Wiring-saving/man-hour saving equipment |
Screw terminal type |
M3 screw, number of terminals: 34P, 7mm pitch, with screw retention and fall prevention mechanism |
0.3~1.25mm2 (when using crimp terminals), 43~58N-cm (4.4~5.9kgf-cm) |
〇 (prepared product) |
Single amplitude 3.5mm |
Acceleration 9.8m/s^29 |
10 times each in X, Y, and Z directions |
Single amplitude 1.75mm |
Acceleration 4.9m/s^2 |
147m/s^2, 3 times each in X, Y, and Z directions (JIS B 3502, IEC61131-2 compliant) |
Relay terminal block for sequencer |
Inside the control panel |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
