All Categories
History
Product
Input/output unit Spring clamp terminal type General purpose 20 input/output points, DC24V FA1-TE2SV20PHandling Company
Mitsubishi Electric Engineering Co., Ltd.Categories
| Image | Part Number | Price (excluding tax) | Overvoltage category | Unit installation | Operating ambient temperature | Ambient humidity | Usage altitude | Usage atmosphere | Storage ambient temperature | Storage ambient humidity | Rated voltage | Connected equipment | Connected device series | Maximum working voltage | Maximum operating current | Pollution level | Purpose | Terminal block type | Terminal block: number of terminals | Terminal block: Wire strip length | Deadline | Dielectric strength voltage, insulation resistance | Vibration resistance (if there is intermittent vibration) 5-8.4Hz | Vibration resistance (if there is intermittent vibration) 8.4~150Hz | Vibration resistance (if there is intermittent vibration) Number of sweeps | Vibration resistance (when there is continuous vibration) 5-8.4Hz | Vibration resistance (when there is continuous vibration) 8.4~150Hz | Shockproof | Product classification | Installation location | Applicable wire: When using ferrule terminal (stranded wire) | Applicable wire: When ferrule terminal is not used (stranded wire, solid wire) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FA1-TE2SV20P |
$ 22.17〜 |
II or below |
Compatible DIN rail: TH35-7.5Fe, TH35-7.5Al (based on JIS C 2812) |
0~55℃ |
5~95%RH (no condensation) |
2,000m or less |
No corrosive gas |
-25~75℃ |
5~95%RH (no condensation) |
DC24V (SELV and LIM or CLASS2) |
Sequencer |
MELSEC iQ-R, MELSEC iQ-F, MELSEC-Q, MELSEC-L, MELSEC-F |
DC30V (SELV and LIM or CLASS2) |
Signal: 1A |
2 or less |
Wiring-saving/man-hour saving equipment |
Spring clamp terminal type |
20P |
8mm |
〇 (prepared product) |
1,250V AC for 1 minute (all terminals <=> between cases), 500V DC 10MΩ or more when measured with an insulation resistance tester |
Single amplitude 3.5mm |
Acceleration 9.8m/s^25 |
10 times each in X, Y, and Z directions |
Single amplitude 1.75mm |
Acceleration 4.9m/s^2 |
147m/s^2, 3 times each in X, Y, and Z directions (JIS B 3502, IEC61131-2 compliant) |
Relay terminal block for sequencer |
Inside the control panel (indoor) |
0.08~0.75mm2 (AWG28-18) Copper wire with temperature rating of 75℃ or higher |
0.2~1.5mm2 (AWG24-16) Copper wire with temperature rating of 75℃ or higher |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
