All Categories
History
Product
Input/output unit Spring clamp terminal type Common terminal block 40 points, DC24V/AC100-240V FA1-TE2SV40EXHandling Company
Mitsubishi Electric Engineering Co., Ltd.Categories
| Image | Part Number | Price (excluding tax) | Overvoltage category | Common method | Unit installation | Operating ambient temperature | Ambient humidity | Usage altitude | Usage atmosphere | Storage ambient temperature | Storage ambient humidity | Rated voltage | Connected equipment | Connected device series | Maximum working voltage | Maximum operating current | Pollution level | Purpose | Terminal block type | Terminal block: number of terminals | Terminal block: Wire strip length | Deadline | Dielectric strength voltage, insulation resistance | Vibration resistance (if there is intermittent vibration) 5-8.4Hz | Vibration resistance (if there is intermittent vibration) 8.4~150Hz | Vibration resistance (if there is intermittent vibration) Number of sweeps | Vibration resistance (when there is continuous vibration) 5-8.4Hz | Shockproof | Product classification | Installation location | Applicable wire: When using ferrule terminal (stranded wire) | Applicable wire: When ferrule terminal is not used (stranded wire, solid wire) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FA1-TE2SV40EX |
$ 27.17〜 |
II or below |
Common 20 points + Common 20 points |
Compatible DIN rail: TH35-7.5Fe, TH35-7.5Al (based on JIS C 2812) |
0~55℃ |
5~95%RH (no condensation) |
2,000m or less |
No corrosive gas |
-25~75℃ |
5~95%RH (no condensation) |
DC24V/AC100-240V (+10%, -15%) |
Sequencer |
MELSEC iQ-R, MELSEC iQ-F, MELSEC-Q, MELSEC-L, MELSEC-F |
DC30V, AC264V |
Common: 6A |
2 or less |
Wiring-saving/man-hour saving equipment |
Spring clamp terminal type |
40P |
8mm |
〇 (prepared product) |
AC3,000V for 1 minute (between commons <=>commons, all terminals<=>between cases), DC500V 10MΩ or more when measured with an insulation resistance tester |
Single amplitude 3.5mm |
Acceleration 9.8m/s^24 |
10 times each in X, Y, and Z directions |
Single amplitude 1.75mm |
147m/s^2, 3 times each in X, Y, and Z directions (JIS B 3502, IEC61131-2 compliant) |
Relay terminal block for sequencer |
Inside the control panel (indoor) |
0.08~0.75mm2 (AWG28-18) Copper wire with temperature rating of 75℃ or higher |
0.2~1.5mm2 (AWG24-16) Copper wire with temperature rating of 75℃ or higher *3,4,5 |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
