All Categories

History

Input/output unit Spring clamp terminal type Spring clamp terminal block conversion adapter FA1-TE40PA-FA1-TE40PA
Input/output unit Spring clamp terminal type Spring clamp terminal block conversion adapter FA1-TE40PA-Mitsubishi Electric Engineering Co., Ltd.

Input/output unit Spring clamp terminal type Spring clamp terminal block conversion adapter FA1-TE40PA
Mitsubishi Electric Engineering Co., Ltd.


About This Product

■Product overview

Relay terminal blocks are products that relay signals between control equipment (sequencers) and devices (sensors, etc.) using a connection method tailored to the application.

■Features 1.

The front-mounted unit eliminates the need for a separate terminal block, so it can be installed in limited space within control panels and equipment.

■Features 2.

No soldering skills are required, reducing variations in connection quality.

■Feature 3.

It is easy to change signal lines when expanding or renovating equipment, and it can also accommodate thicker wire sizes.

■Feature 4.

Equipped with a voltage detection port, if the spring clamp terminal specification is used, wiring continuity can be confirmed, reducing start-up and maintenance time.

■Features 5.

Push-in connection is possible by using ferrule terminals.

■Notes

・*1: Do not use or store in an environment pressurized above atmospheric pressure at an altitude of 0m. If used, it may malfunction. ・*2: Indicates which power distribution section, from the public power distribution network to on-premises machinery, the device is expected to be connected to. Category II applies to equipment that is powered from fixed equipment. The surge withstand voltage for devices rated up to 300V is 2,500V. ・*3: An index that indicates the degree of occurrence of conductive substances in the environment in which the device is used. Pollution degree 2 produces only non-conductive pollution. However, it is an environment where temporary conductivity can occur due to accidental condensation.

  • Product

    Input/output unit Spring clamp terminal type Spring clamp terminal block conversion adapter FA1-TE40PA

Share this product


10+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Input/output unit Spring clamp terminal type Spring clamp terminal block conversion adapter FA1-TE40PA

Image Part Number Price (excluding tax) Overvoltage category Operating ambient temperature Ambient humidity Usage altitude Usage atmosphere External dimensions Rated voltage Connected equipment Connected device series Maximum working voltage Maximum operating current Pollution level Purpose Terminal block type Terminal block: number of terminals Terminal block: Wire strip length Deadline Dielectric strength voltage, insulation resistance Vibration resistance (if there is intermittent vibration) 5-8.4Hz Vibration resistance (if there is intermittent vibration) 8.4~150Hz Vibration resistance (if there is intermittent vibration) Number of sweeps Vibration resistance (when there is continuous vibration) 5-8.4Hz Vibration resistance (when there is continuous vibration) 8.4~150Hz Shockproof Product classification Installation location Mass Applicable wire: When using ferrule terminal (stranded wire) Applicable wire: When ferrule terminal is not used (stranded wire, solid wire)
Input/output unit Spring clamp terminal type Spring clamp terminal block conversion adapter FA1-TE40PA-Part Number-FA1-TE40PA

FA1-TE40PA

$ 64.35〜

II or below

0~55℃ (when not using high temperature base unit), 0~60℃ (when using high temperature base unit)

5~95%RH (no condensation)

2,000m or less

No corrosive gas

27.4 (W) ×102 (H) ×28 (D) mm

DC24V (Class2)

Sequencer

MELSEC iQ-R, MELSEC-Q, MELSEC-L

DC30V (Class2)

0.5A/pt,2A/pt (1A,2A,1B,2B)

2 or less

Wiring-saving/man-hour saving equipment

Spring clamp terminal type

40 points

8mm

〇 (prepared product)

AC500V for 1 minute DC500V insulation resistance tester: 10MΩ or more

Single amplitude 3.5mm

Acceleration 9.8m/s^26

10 times each in X, Y, and Z directions

Single amplitude 1.75mm

Acceleration 4.9m/s^26

147m/s^2, 3 times each in X, Y, and Z directions (JIS B 3502, IEC61131-2 compliant)

Relay terminal block

Inside the control panel

Approximately 100g

0.08~0.75mm2 (AWG28~18), temperature standard 75℃ or higher electric wire, 0.20~0.29N-m, 0.43~0.57N-m

0.2~1.5mm2 (AWG24~16), temperature standard 75℃ or higher electric wire

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Terminal Blocks Products

Other products of Mitsubishi Electric Engineering Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Mitsubishi Electric Engineering Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree