All Categories
History
Product
Input/output unit Spring clamp terminal type MELSEC only 32 points 1 wire type FA1-TESV32XYHandling Company
Mitsubishi Electric Engineering Co., Ltd.Categories
| Image | Part Number | Price (excluding tax) | Overvoltage category | Common method | Unit installation | Operating ambient temperature | Ambient humidity | Usage altitude | Usage atmosphere | Storage ambient temperature | Storage ambient humidity | Rated voltage | Connected equipment | Connected device series | Maximum working voltage | Maximum operating current | Pollution level | Purpose | Terminal block type | Terminal block: number of terminals | Terminal block: Applicable wire | Terminal block: Wire strip length | Deadline | Dielectric strength voltage, insulation resistance | Vibration resistance (if there is intermittent vibration) 5-8.4Hz | Vibration resistance (if there is intermittent vibration) 8.4~150Hz | Vibration resistance (if there is intermittent vibration) Number of sweeps | Vibration resistance (when there is continuous vibration) 5-8.4Hz | Vibration resistance (when there is continuous vibration) 8.4~150Hz | Shockproof | Product classification | Installation location |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FA1-TESV32XY |
$ 25.74〜 |
II or below |
32 points / (24V) common 3 points + (0V) common 3 points |
Compatible DIN rail: TH35-7.5Fe, TH35-7.5AL (based on JIS C 2812) |
-20~55℃ |
5~95%RH (no condensation) |
2,000m or less |
No corrosive gas |
-25~75℃ |
5~95%RH (no condensation) |
DC24V |
Sequencer |
MELSEC iQ-R, MELSEC iQ-F, MELSEC-Q, MELSEC-F, MELSEC-L |
DC30V |
Signal: 1A, Common: 2A |
2 or less |
Wiring-saving/man-hour saving equipment |
Spring clamp terminal type |
38 points |
0.2~1.5mm2 (AWG24-16) Covering φ2.8mm or less |
8-9mm (maximum wire sheathing outer diameter φ2.8mm or less) |
〇 (prepared product) |
AC500V for 1 minute DC500V insulation resistance tester: 10MΩ or more |
Single amplitude 3.5mm |
Acceleration 9.8m/s^25 |
10 times each in X, Y, and Z directions |
Single amplitude 1.75mm |
Acceleration 4.9m/s^25 |
147m/s^2, 3 times each in X, Y, and Z directions (JIS B 3502, IEC61131-2 compliant) |
Relay terminal block for sequencer |
Inside the control panel |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
