All Categories

History

Relay terminal block for sequencer, screw terminal type, for multi-channel high-speed counter unit (MELSEC-Q series) FA-LTB40D63P6V12-FA-LTB40D63P6V12
Relay terminal block for sequencer, screw terminal type, for multi-channel high-speed counter unit (MELSEC-Q series) FA-LTB40D63P6V12-Mitsubishi Electric Engineering Co., Ltd.

Relay terminal block for sequencer, screw terminal type, for multi-channel high-speed counter unit (MELSEC-Q series) FA-LTB40D63P6V12
Mitsubishi Electric Engineering Co., Ltd.


About This Product

■Product overview

Relay terminal blocks are products that relay signals between control equipment (sequencers) and devices (sensors, etc.) using a connection method tailored to the application.

■Features 1.

Wiring is made easier by receiving the counter input signal on the terminal block.

■Features 2.

For 12V and 24V input, there is a built-in resistor in the unit, so there is no need to connect an external resistor.

■Feature 3.

It is possible to reduce wiring errors due to symbol paper.

■Notes

・*1: Do not use or store in an environment pressurized above atmospheric pressure at an altitude of 0m. If used, it may malfunction. ・*2: Indicates which power distribution section, from the public power distribution network to on-premises machinery, the device is expected to be connected to. Category II applies to equipment that is powered from fixed equipment. The surge withstand voltage for devices rated up to 300V is 2,500V. ・*3: An index that indicates the degree of occurrence of conductive substances in the environment in which the device is used. Pollution degree 2 produces only non-conductive pollution. However, it is an environment where temporary conductivity can occur due to accidental condensation. - When connecting a cable to the unit, push the cable connector until the connector locks. This may cause poor contact.

  • Product

    Relay terminal block for sequencer, screw terminal type, for multi-channel high-speed counter unit (MELSEC-Q series) FA-LTB40D63P6V12

Share this product


20+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Relay terminal block for sequencer, screw terminal type, for multi-channel high-speed counter unit (MELSEC-Q series) FA-LTB40D63P6V12

Image Part Number Price (excluding tax) Overvoltage category *2 Counter input signal: pulse width Counter input signal: voltage Counter input signal: current Unit installation (DIN rail) Unit installation (screw installation) Operating ambient temperature Ambient humidity Usage altitude *1 Usage atmosphere Storage ambient temperature Storage ambient humidity Connection encoder Connected equipment Connected device series Pollution level *3 Purpose Terminal block type Terminal block: terminal screw Terminal block: Applicable wire, tightening torque Deadline Dielectric strength voltage, insulation resistance Vibration resistance (if there is intermittent vibration) 5-8.4Hz Vibration resistance (if there is intermittent vibration) 8.4~150Hz Vibration resistance (if there is intermittent vibration) Number of sweeps Vibration resistance (when there is continuous vibration) 5-8.4Hz Vibration resistance (when there is continuous vibration) 8.4~150Hz Shockproof Product classification Installation location
Relay terminal block for sequencer, screw terminal type, for multi-channel high-speed counter unit (MELSEC-Q series) FA-LTB40D63P6V12-Part Number-FA-LTB40D63P6V12

FA-LTB40D63P6V12

$ 41.15〜

II or below

According to QD63P6 performance specifications

12V+-10%

10.8~15.9mA

Compatible DIN rail: TH35-7.5Fe, TH35-7.5AL (based on JIS C 2812)

M4×0.7mm×8mm or more, tightening torque range: 78~118N-cm (8~12kgf-cm)

0~55℃

5~95%RH (no condensation)

2,000m or less

No corrosive gas

-25~75℃

5~95%RH (no condensation)

Open collector output

Sequencer

MELSEC-Q

2 or less

Wiring-saving/man-hour saving equipment

Screw terminal type

M3 regular screw 7.62mm pitch

0.3~2mm2 (when using crimp terminals), 50~75N-cm (5.2~7.6kgf-cm)

〇 (prepared product)

Withstand voltage: AC500V for 1 minute, resistance: 10MΩ or more (between all external terminals and ground)

Single amplitude 3.5mm

Acceleration 9.8m/s^18

10 times each in X, Y, and Z directions

Single amplitude 1.75mm

Acceleration 4.9m/s^18

147m/s^2, 3 times each in X, Y, and Z directions (JIS B 3502, IEC61131-2 compliant)

Relay terminal block for sequencer

Inside the control panel

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Terminal Blocks Products

Other products of Mitsubishi Electric Engineering Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Mitsubishi Electric Engineering Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree