All Categories
History
Product
Screw terminal type for positioning unit and servo amplifier FA-LTBQ75DPHandling Company
Mitsubishi Electric Engineering Co., Ltd.Categories
| Image | Part Number | Price (excluding tax) | Overvoltage category *2 | Connector: Servo amplifier side | Connector: Positioning unit side | Unit installation (DIN rail) | Unit installation (screw installation) | Operating ambient temperature | Ambient humidity | Usage altitude *1 | Usage atmosphere | Storage ambient temperature | Storage ambient humidity | Number of supported axes | Connected equipment | Connected device series | Pollution level *3 | Purpose | Terminal block type | Terminal block: terminal screw | Terminal block: Applicable wire, tightening torque | Deadline | Dielectric strength voltage, insulation resistance | Vibration resistance (if there is intermittent vibration) 5-8.4Hz | Vibration resistance (if there is intermittent vibration) 8.4~150Hz | Vibration resistance (if there is intermittent vibration) Number of sweeps | Vibration resistance (when there is continuous vibration) 5-8.4Hz | Vibration resistance (when there is continuous vibration) 8.4~150Hz | Shockproof | Product classification | Installation location | Mass |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FA-LTBQ75DP |
$ 37.90〜 |
II or below |
MDR14P connector x 2 |
MIL40P connector |
Compatible DIN rail: TH35-7.5Fe, TH35-7.5AL (based on JIS C 2812) |
M4×0.7mm×8mm or more, tightening torque range: 78~118N・cm (8~12kgf-cm) |
0~55℃ |
5~95%RH (no condensation) |
2,000m or less |
No corrosive gas |
-25~75℃ |
5~95%RH (no condensation) |
2 axes (2 units are used for 4 axes, 4 units are used for 8 axes) |
Sequencer |
MELSEC iQ-R, MELSEC-Q |
2 or less |
Wiring-saving/man-hour saving equipment |
Screw terminal type |
M3 regular screw 7.62mm pitch |
0.3~2mm^2 (when using crimp terminals), 50~75N・cm (5.2~7.6kgf-cm) |
〇 (prepared product) |
Withstand voltage: AC500V for 1 minute (between all DC external terminals and ground) |
Single amplitude 3.5mm |
Acceleration 9.8m/s^2 |
10 times each in X, Y, and Z directions |
Single amplitude 1.75mm |
Acceleration 4.9m/s^2 |
147m/s^2, 3 times each in X, Y, and Z directions (JIS B 3502, IEC61131-2 compliant) |
Relay terminal block for sequencer |
Inside the control panel |
Approximately 140g |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
