All Categories

History

FA device, laser marker/welding machine PLC/terminal FP-XH-AFPXHC14□
FA device, laser marker/welding machine PLC/terminal FP-XH-Panasonic Industry Co., Ltd.

FA device, laser marker/welding machine PLC/terminal FP-XH
Panasonic Industry Co., Ltd.


About This Product

basic information

■One Stop Solution Just connect with Panasonic

Obtained UL/C-UL, CE, UKCA. (UL/C-UL: Excluding some models CE: Excluding some models UKCA: Excluding some models) Features

■Small terminal block type controller. Equipped with high basic performance and abundant functions

・High-speed calculation processing: Basic instructions (ST instructions) 0.04 μs/step, up to 7k steps (8 times faster than conventional ones) ・Large capacity program memory: Program capacity up to 40k steps (16k steps for C14), variable in 24k / 32k / 40k steps - Scalability: Maximum I/O points: 300 points. Up to 8 expansion units can be connected to one control unit (382 points using FP0R expansion unit and expansion cassette). Up to 4 expansion cassettes can be added (up to 2 for C14) ・Multi-axis positioning control: Built-in high-speed pulse output function for up to 6 axes at 100kHz (Transistor output type has built-in 3-axis pulse output function for C14, 4-axis for C30, and 6-axis pulse output function for C60) ・Network: Up to 5 channels of communication ports (Supports up to 5 channels including 2 communication cassettes (2 channel type) and tool ports.) Compatible with Modbus-RTU (compatible with industry standard Modbus-RTU master/slave), PLC link (up to 16 FP-XHs can be connected and bit data/word data can be shared (linked))

■RTEX Realtime Express - The ultimate in real-time performance

Previously, a lot of wiring was required to connect a PLC and a motor, but the FP-XH M8N can be connected to Panasonic Corporation's AC servo motor MINAS A6N using two Ethernet cables. System concept

■Easy

No need for complicated wiring, reducing design and wiring time

■High functionality

Achieving synchronous control with high-speed network and high-performance servo

■All in one

All-in controller, no additional units required

■Easy to connect with LAN cable. Moreover, it is resistant to noise and safe.

No need for complicated wiring, reducing design and wiring time

  • Product

    FA device, laser marker/welding machine PLC/terminal FP-XH

Share this product


40+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of FA device, laser marker/welding machine PLC/terminal FP-XH

Image Part Number Price (excluding tax) EC directive compliance standards Operating ambient temperature Ambient humidity Usage atmosphere Storage ambient temperature Storage ambient humidity Pollution degree Insulation resistance Between all input terminals and ground terminal Insulation resistance Between all output terminals and ground terminal Insulation resistance between power terminal and ground terminal Insulation resistance between power supply terminal and service power supply terminal Noise resistance Vibration resistance Shockproof Withstand voltage Transistor Between all input terminals and ground terminal Withstand voltage Transistor Between all output terminals and ground terminal Withstand voltage transistor between power supply terminal and service power supply terminal Withstand voltage Transistor output Between power terminal and ground terminal Withstand voltage Relay output Between all input terminals and ground terminal Withstand voltage Relay output Between all output terminals and ground terminal Withstand voltage Relay output Between power terminal and ground terminal Withstand voltage Relay output Between power terminal and service power terminal Overvoltage category
FA device, laser marker/welding machine PLC/terminal FP-XH-Part Number-AFPXHC14□

AFPXHC14□

Available upon quote

EMC Directive: EN 61131-2
(Emissions, Immunity, Low Voltage Directive)

0~+55℃

10~95%RH (at25℃, non-condensing)

No corrosive gases. Not too dusty

-40~+70℃

10~95%RH (at25℃, non-condensing)

2

100 MΩ or more
(by 500V DC insulation resistance meter)

100 MΩ or more
(by 500V DC insulation resistance meter)

100 MΩ or more
(by 500V DC insulation resistance meter)

100 MΩ or more
(by 500V DC insulation resistance meter)

1,000V[P-P] Pulse width 50ns, 1μs
(By noise simulator method) (Power supply terminal)

5~8.4Hz Single amplitude 3.5mm
8.4~150Hz Acceleration 9.8m/s2
Sweep 10 times in each direction of X, Y, Z (1 octave/min.)

147m/s2 4 times each in X, Y, and Z directions

AC power: 1,500V AC for 1 minute
DC power supply: 500V AC for 1 minute

AC power: 500V AC for 1 minute
DC power supply: 500V AC for 1 minute

AC power: 1,500V AC for 1 minute

AC power: 1,500V AC for 1 minute
DC power supply: 500V AC for 1 minute

AC power: 1,500V AC for 1 minute
DC power supply: 500V AC for 1 minute

AC power: 1,500V AC for 1 minute
DC power supply: 500V AC for 1 minute

AC power: 1,500V AC for 1 minute
DC power supply: 500V AC for 1 minute

AC power: 1,500V AC for 1 minute

Category II

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Programmable Controllers Products

Other products of Panasonic Industry Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Panasonic Industry Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree