Tension nut that can tighten a large bolt tightening with a small torque of 1/100
Japan Pralad Co., Ltd.
About This Product
A nut that can tighten large bolts with "1/100 small torque" without using electricity or air. Even with the M100 bolt, the tightening torque is 200Nm. Can be tightened with one torque wrench. A nut that does not loosen with a special slope disk with a patent structure. In the case of M56, the standard tightening torque is about 8,600 nm, but the tension nut is only 80 nm.
■ Features of tension nuts
It does not use electricity or air, but tighten with only a torque wrench.
In the case of large bolt tightening of M30 to M100, tightening torque is tens of to tens of thousands of nm, which requires large hydraulic tools and electric tools. The tension nut can be easily tightened with a large bolt by tightening the Hertz screw (a bolt with a special small hexagon hole). No major tools or equipment are required.
■ Tension nut that never loosens (international patent acquisition)
It is ideal for machines with vibration with the loosening effect of tension nuts. It is a structure that generates higher axial force and further tighten the force in the reverse rotation direction, which is trying to loosen by a special structure "slope disk".
■ High -precision bolt tightening axial force management
Because the bolt is tightened by axial force management, there is no effect of friction and it can tighten bolts with higher accuracy than torque management. High -precision tightening within ± 10%axial strength accuracy
■ For bolt tightening work in narrow and high places
Since the torque wrench can be tightened alone, tension nuts play an active part in narrow space where large tools do not fit, high altitude work without power sources, local assembly work, etc.
■ Bolt -baked, no bite occurs
Rather than turning the bolts and tightening, tightening the small helts screw to stretch the bolt with tensile force, so there is no frictional heat and "bolt does not occur". The nut is especially suitable for large bolts with M30 or higher.
■ High temperature 280 ℃ compatible
It can be used up to a high temperature of 280 ° C, such as a pressure container with a high temperature of the usage environment.
■ Just replace the tension nut and hexagon nut
Tension nuts can be used even if the length of the conclusion is short. There are no restrictions on the usage conditions like bolt tensioner. It can be used simply by replacing it with an existing hexagon nut. Bolt size: M20 to M110, larger large bolt diameter size can be supported.
* There are other part numbers.
Please contact us for demo reception, quote request, request for materials, etc.
Japan Pralad TEL: 078-967-3556
-
-
Product
Tension nut that can tighten a large bolt tightening with a small torque of 1/100