Semi -automatic black dyeing equipment and processing agents for full -fledged and easy black dyeing.-Standard type

Semi -automatic black dyeing equipment and processing agents for full -fledged and easy black dyeing.
Edec Co., Ltd.

Edec Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

26.4hours

Relatively Fast Response

About This Product

■ OverviewA set of "semi -automatic black dyeing equipment" and a set of drugs that make full -fledged black dyeing processing of tools and steel parts. The concentration and temperature control that caused the failure due to danger was automated by computer control, so that black dyeing can be performed safely without failure. In addition, it can prevent defective quality, such as the occurrence of red rust due to incomplete rinsing and inadequate black dyeing film due to inappropriate boiling.

■ Characteristics of heated black dyeing・ The surface of the material itself is about 1 μm thick, which is transferred to a black film of iron (FE3O4), and does not affect the dimensional accuracy.
-The film is worn -resistant, rubbing and peeling or black dregs.
-The film holds rust prevention agents to exert an excellent rust prevention effect (indoor use).
-The processing solution is economical, which can be used repeatedly without disposal.

■ Functions and features of black dyeing equipment・ A series of black dyeing processes (about 20 minutes): 1. Defeat (heating) ▶ 2. Overflow rinse ▶ 3. Black dyeing processing ▶2 Overflow rinse ▶ 5. Rust prevention treatment is all covered.
・ When the set temperature exceeds, the water injection of the specified number of seconds is automatically performed, so boiling in a constant temperature zone is always performed. No solution concentration and boiling point management are not required, and the optimal black dye quality according to steel material can be secured.
-The drainage excreted by overflow rinsing (after degreasing and after black dyeing) is a low -concentration alkaline water, so it can be neutralized with acid.
-The water shower injection function of the electric whistle can reduce the dyeing solution, prevent surface oxidation due to contact with oxygen, and to thoroughly rinse finish.

* If you wish to use an automatic medium -Japanese device, we will introduce the equipment manufacturer.

■ FunctionalDefeat tank, black dyeing tank heater, digital temperature control organs, automatic water injection function, water injection timer, overflow type rinsing tank, drainage cock under precipitate, etc.

■ Set contents・ Semi -automatic black dyeing device body
・ Han basket: 2
・ Roading work table: 2 units
・ Rust prevention work table
・ Rust -prevention oil tank (with lid)
・ Neutral release tank
・ Complete set of drugs ・ Water -soluble alkaline defatimeter (black dye, water replacement rust prevention agent, 40%concentration of medium -sized sulfuric acid (rust removal, redtailed, for neutralization))
・ Work equipment ・ Face mask (gloves / apron)

Model
There are 2 models for this product.

Product
Semi -automatic black dyeing equipment and processing agents for full -fledged and easy black dyeing.

Handling Company
Edec Co., Ltd.

Categories

Protective Materials & Equipment

Corrosion Inhibitors

Paints

Surface Treatment Chemicals

360+ people viewing

Last viewed: 2 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of Semi -automatic black dyeing equipment and processing agents for full -fledged and easy black dyeing.

Click on the part number for more information about each product

Image	Part Number	Price (excluding tax)	Heating tank dimensions	Dimension for immersion	Processed liquid correction amount	power supply	Heater capacity	Material	Roading work table	Dried work table	Rust -prevention oil tank (with lid)	Neutral relay tank
	Standard type	Available upon quote	2,800W x 680D x 930H	320W x 320d x 400H	37L	200V, 3 phase, 40A, 10kw	6kW (black dyeing tank) + 6kw (degreasing tank)	Tank: SUS304 / Heater: SUS316	900W x 600D x 800H	900W x 600D x 800H	Capacity 50L, 550W x 350D x 300H (internal dimension)	600φ x 800H
	Enlarged type	Available upon quote	3,650W x 835D x 930H	400W x 500D x 400H	110L	200V, 3 phase, 75A, 16kw	5.4kW x 2 (black dyeing tank) + 5.4kw (degreasing tank)	Tank: SUS304 / Heater: SUS316	1,200W x 600D x 800H	1,200W x 600D x 800H	Capacity 100L, 600W x 450D x 370H (internal dimension)	600φ x 800H

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

EP-10 (Dehumidifying penetrating rust preventive agent)

Toyo Yaku Kagaku Kogyo Co., Ltd.

220+ people viewing

Last viewed: 5 hours ago

Response time: 12.49 hours

Corrosion Inhibitors

101 (solvent diluted rust inhibitor)

Toyo Yaku Kagaku Kogyo Co., Ltd.

210+ people viewing

Last viewed: 2 seconds ago

Response time: 12.49 hours

Corrosion Inhibitors

Metal degreasing cleaning rust preventive agent TIWS-DT500

Takahashi Metal Co., Ltd.

180+ people viewing

Last viewed: 18 minutes ago

Response time: 9.78 hours

Corrosion Inhibitors

2 models listed

Silica gel desiccant for packaging Various silica gel packages (A type)

Technos Nakata Co., Ltd.

70+ people viewing

Last viewed: 2 hours ago

Response time: 47.68 hours

Corrosion Inhibitors

3 models listed

Lanolin (antirust additive)

Toyo Yaku Kagaku Kogyo Co., Ltd.

240+ people viewing

Last viewed: 5 hours ago

Response time: 12.49 hours

Corrosion Inhibitors

Water-soluble rust preventive agent for metals Inconspicuous water marks Outstanding rust preventive power TIWS-AEF80

Takahashi Metal Co., Ltd.

110+ people viewing

Last viewed: 1 hour ago

Response time: 9.78 hours

Corrosion Inhibitors

Rust-proof shrink (heat shrink) film

CSJ Co., Ltd.

240+ people viewing

Last viewed: 23 hours ago

Response time: 27.88 hours

Corrosion Inhibitors

6 models listed

Silica gel desiccant for packaging Various silica gel packages (Type B)

Technos Nakata Co., Ltd.

70+ people viewing

Last viewed: 5 hours ago

Response time: 47.68 hours

Corrosion Inhibitors

3 models listed

Disinfectant and anti-rust agent for Laprakun knives

OLI Lab Co., Ltd.

$16.90

50+ people viewing

Last viewed: 3 hours ago

Corrosion Inhibitors

2 models listed

Zinc spray epoxy primer

Kimura Shoji Co., Ltd.

240+ people viewing

Last viewed: 2 hours ago

Corrosion Inhibitors

2 models listed

Anti-corrosion primer room temperature curing type

Kobe Mitaka Co., Ltd.

40+ people viewing

Last viewed: 3 hours ago

Corrosion Inhibitors

2 models listed

Water-soluble rust preventive agent (water-soluble clear lacquer) SA-10

Saito Shokai Co., Ltd.

20+ people viewing

Last viewed: 17 hours ago

Corrosion Inhibitors

See More Corrosion Inhibitors Products

Other products of Edec Co., Ltd.

Reviews shown here are reviews of companies.

Ideal for lubrication and release agents in high temperature range, heat -resistant lubrication/release agent nitrogen

Edec Co., Ltd.

360+ people viewing

Last viewed: 3 hours ago

Response time: 26.45 hours

Mold Release Agents

8 models listed

Effective for continuous use at high temperature, heat -resistant lubrication/release type nitride product/inorganic (water -based) product

Edec Co., Ltd.

340+ people viewing

Last viewed: 7 hours ago

Response time: 26.45 hours

Mold Release Agents

7 models listed

Black thin lubricating skin film -heat -resistant / release type material graphite (graphite) product

Edec Co., Ltd.

310+ people viewing

Last viewed: 8 hours ago

Response time: 26.45 hours

Mold Release Agents

2 models listed

Excellent lubrication & separation silver film -resistant lubricating / release type aluminum Fine powder product

Edec Co., Ltd.

230+ people viewing

Last viewed: 8 hours ago

Response time: 26.45 hours

Mold Release Agents

Small friction coefficient heat -resistant / release type material fluorine resin product

Edec Co., Ltd.

340+ people viewing

Last viewed: 1 hour ago

Response time: 26.45 hours

Mold Release Agents

5 models listed

Stable type and adhesive prevention effect exercise the heat -resistant lubrication / release type material and other materials products

Edec Co., Ltd.

300+ people viewing

Last viewed: 6 hours ago

Response time: 26.45 hours

Mold Release Agents

3 models listed

Many products and options heated black dyeing equipment and processing agent set according to the application

Edec Co., Ltd.

450+ people viewing

Last viewed: 1 hour ago

Response time: 26.45 hours

Surface Treatment Chemicals

4 models listed

Grigging black film without uneven black dye

Edec Co., Ltd.

270+ people viewing

Last viewed: 1 hour ago

Response time: 26.45 hours

Surface Treatment Chemicals

3 models listed

Easy to process at room temperature for normal temperature black dyes/steel

Edec Co., Ltd.

470+ people viewing

Last viewed: 8 hours ago

Response time: 26.45 hours

Surface Treatment Chemicals

4 models listed

Optimal pills ideal for temporary coordination to backup blocks during polishing work

Edec Co., Ltd.

280+ people viewing

Last viewed: 18 hours ago

Response time: 26.45 hours

Glue

3 models listed

Heat-resistant coating agent for metal

Edec Co., Ltd.

20+ people viewing

Last viewed: 13 hours ago

Response time: 26.45 hours

Ceramic Coatings

Ideal coat agent for heat -resistant coating to metals, etc.

Edec Co., Ltd.

440+ people viewing

Last viewed: 6 hours ago

Response time: 26.45 hours

Silicone Ink

9 models listed

View more products of Edec Co., Ltd.

About Company Handling This Product

Edec Co., Ltd.

Response Rate

100.0%

Response Time

26.4hrs

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Semi -automatic black dyeing equipment and processing agents for full -fledged and easy black dyeing. Edec Co., Ltd.

Edec Co., Ltd.'s Response Status

About This Product

■ Overview

■ Characteristics of heated black dyeing

■ Functions and features of black dyeing equipment

■ Functional

■ Set contents

2 Models of Semi -automatic black dyeing equipment and processing agents for full -fledged and easy black dyeing.

Standard type

Enlarged type

Customers who viewed this product also viewed

Other products of Edec Co., Ltd.

About Company Handling This Product

Related search keywords

Semi -automatic black dyeing equipment and processing agents for full -fledged and easy black dyeing.
Edec Co., Ltd.