Q Switch solid laser Talon
Spectra-Physics
About This Product
24/7 It is a robust industrial laser that combines low maintenance costs and high performance in the operation of operating.
■ Overwhelming cost performance UV / green / nanosecond laser
・ High performance and reliability at overwhelming low cost
・ Compatible with optical, electrical and software interfaces, 12 models with the same firing position, and optical axis
・ Robust industrial platform
・ Realizes outstanding beam parameter, performance and stability
・ Purge the inside of the resonator by the circulating air purge system (ALPS) to achieve a long life.
・ Minimize downtime due to maintenance by adopting long life LD
■ Overview
Talon ® is a robust industrial laser that combines low -maintenance costs and high performance in 24/7 operation. Stable beam quality and high occupancy rate can be used in many fine -tuned applications.
In addition, the unique E-PULSE function can increase the range of usage by the customer by maintaining a certain pulse energy even in a wide range of pulse frequencies. With this function, you can easily increase productivity because the same pulse energy is maintained even if the pulse frequency is high.
■ Pursuing all of each performance, reliability, cost
Talon is an LP excitation Q -switch UV and green solid laser that combines low cost, high performance and reliability. The UV model has a wide lineup from 6W to high output of up to 45W, corresponds to a wide range of processing conditions and applications, and optical, electricity, and various interfaces are highly compatible, making it easier to design your equipment. Masu.
Easy to install the device with the integrated laser head and power supply by Spectra-PHYSICS's it's in the box design. In the UV model, the output up to 45W, the pulse energy up to 500 μJ, and the green models are up to 70W or 1,000 μJ, and the repetition of the UV is 0 to 500 kHz. In addition, in the case of 0 to 700kHz, the stability between pulse is high in green, and TEM00 mode quality is obtained.
■ Flexible platform
Talon is a flexible platform that can make appropriate lasers suit process requirements and budget. Various models from UV 6W to 45W and green 15W to 70W have similar functions, characteristics and superiority.
If the short pulse width is preferred, Talon is excellent with its high peak power and short pulse width. If you need higher pulse energy and longer pulse width, the Talon HE model provides 3-6 times the pulse width with a high pulse energy.
■ User -friendly and high reliability
Each Talon model has a common footprint and interface, making it easy to operate. For this reason, the current processing capacity and introduction of the current processing capacity are easy and convenient.
Talon is a minimum of laser replacement with all models. It is possible to communicate and control in RS232 and USB, and it also has a major parameter data logging function. High -quality beam mode is maintained in UV for up to 500 kHz and up to 700kHz for green. Talon, which was manufactured by long life components and UV technology, is a reliable laser for applications that are severely demanded in a severe environment on 24/7.
-
Product
Q Switch solid laser Talon
-
Handling Company
Spectra-Physics
-
Categories
9 Models of Q Switch solid laser Talon
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | AC input | Advanced | Beam -oriented stability | Beam characteristic space mode | Beam diameter, waist position | Beam dissipation (full -width) | Beam's asymmetry (circularity) | Bore City tolerance value | Cooling water temperature | Dimensions (laser) (length x width x height) | Dimensions (utility module) (length x width x height) | E-PULSE Pulse Energy Control | Energy stability between pulse | Featuring option safety shutter | Flow of cooling water | Heat load (for water) | Humidity | Internal power monitor | M^2 | Polarization rate | Repeated rate | Temperature range | Total power consumption | Warm -up time | Weight (laser) | Weight (utility module) | power | pulse width | wavelength |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
Talon UV45 |
Available upon quote | AC110/220 ± 10%V, 50 ~ 60Hz | 0 to 2,000 meters operations. 0 ~ 12,000m (when not operating) | <± 25 µrad/℃ | TEM00 | 3.5mm ± 10% | <0.3mrad | <1.1 (>> 90%) | <1mm, <1mrad | Stable to 20 ℃ ± 1 ° C and ± 0.2 ° C | 28 x 9 x 5 inches (711 x 229 x 127mm) | 498 x 482 x 88mm (19.6 x 19 x 3.5 inches) | Keep pulse energy, pulse width, and beam parameters constantly over a wide range of repetitions |
<2%RMS @150kHz Up to 300kHz <3%RMS 300kHz or more <5%RMS |
Field service is easy by installing external installation, and you can replace it by customers. | 3.5 ~ 6.0 liter/minute, usually 40 PSI | Less than 800 watts | 8-95%, no condensation | Calibration is possible for external power meters | <1.2 | 100: 1 vertical | 0 ~ 500kHz | The operating temperature is 18-35 ° C. -20-50 ℃ Non -operating | Less than 900 watts | Less than 20 minutes from standby. Less than 40 minutes from the cold start | 45 pounds (20.5kg) | 22 pounds (10kg) |
> 30 w @ 100kHz > 45 w @ 150kHz > 35 w @ 200kHz > 23 w @ 300kHz |
<35ns @ 150kHz | 355nm |
|
|
Talon UV30 |
Available upon quote | AC110/220 ± 10%V, 50 ~ 60Hz | 0 to 2,000 meters operations. 0 ~ 12,000m (when not operating) | <± 25 µrad/℃ | TEM00 | 3.5mm ± 10% | <0.3mrad | <1.1 (>> 90%) | <1mm, <1mrad | Stable to 20 ℃ ± 1 ° C and ± 0.2 ° C | 25 x 6 x 4.5 inches (635 x 153 x 115mm) | 498 x 482 x 88mm (19.6 x 19 x 3.5 inches) | Keep pulse energy, pulse width, and beam parameters constantly over a wide range of repetitions |
<2%RMS @100kHz, representative value Up to 150kHz <3%RMS Up to 300kHz <5%RMS, representative value |
Field service is easy by installing external installation, and you can replace it by customers. | Minimum 1.5 liters/minutes, usually 20 PSI | Less than 350 watts | 8-95%, no condensation | Calibration is possible for external power meters | <1.2 | 100: 1 vertical | 0 ~ 500kHz | The operating temperature is 18-35 ° C. -20-50 ℃ Non -operating | Less than 400 watts | Less than 20 minutes from standby. Less than 40 minutes from the cold start | 28 pounds (12.7kg) | 22 pounds (10kg) |
> 15 w @ 50kHz > 30 w @ 100 kHz > 23 w @ 200kHz > 17w @ 300kHz |
<25ns @ 100kHz | 355nm |
|
|
Talon UV20 |
Available upon quote | AC110/220 ± 10%V, 50 ~ 60Hz | 0 to 2,000 meters operations. 0 ~ 12,000m (when not operating) | <± 10 µrad/℃ | TEM00 | 3.5mm ± 10% | <0.3mrad | <1.1 (>> 90%) | <1mm, <1mrad | Stable to 20 ℃ ± 1 ° C and ± 0.2 ° C | 25 x 6 x 4.5 inches (635 x 153 x 115mm) | 498 x 482 x 88mm (19.6 x 19 x 3.5 inches) | Keep pulse energy, pulse width, and beam parameters constantly over a wide range of repetitions |
<2%RMS @100kHz, representative value Up to 150kHz <3%RMS Up to 300kHz <5%RMS, representative value |
Field service is easy by installing external installation, and you can replace it by customers. | Minimum 1.5 liters/minutes, usually 20 PSI | Less than 350 watts | 8-95%, no condensation | Calibration is possible for external power meters | <1.2 | 100: 1 vertical | 0 ~ 500kHz | The operating temperature is 18-35 ° C. -20-50 ℃ Non -operating | Less than 400 watts | Less than 20 minutes from standby. Less than 40 minutes from the cold start | 28 pounds (12.7kg) | 22 pounds (10kg) |
> 10w @ 50kHz > 20 w @ 100kHz > 11 w @ 300kHz |
<25ns @ 100kHz | 355nm |
|
|
Talon UV15 |
Available upon quote | AC110/220 ± 10%V, 50 ~ 60Hz | 0 to 2,000 meters operations. 0 ~ 12,000m (when not operating) | <± 10 µrad/℃ | TEM00 | 1.0mm ± 10%5 | <0.6mrad | <1.1 (>> 90%) | <1mm, <1mrad | Stable to 20 ℃ ± 1 ° C and ± 0.2 ° C | 25 x 6 x 4.5 inches (635 x 153 x 115mm) | 498 x 482 x 88mm (19.6 x 19 x 3.5 inches) | Keep pulse energy, pulse width, and beam parameters constantly over a wide range of repetitions |
<2%RMS @100kHz, representative value Up to 150kHz <3%RMS Up to 300kHz <5%RMS, representative value |
Field service is easy by installing external installation, and you can replace it by customers. | Minimum 1.5 liters/minutes, usually 20 PSI | Less than 300 watts | 8-95%, no condensation | Calibration is possible for external power meters | <1.2 | 100: 1 vertical | 0 ~ 500kHz | The operating temperature is 18-35 ° C. -20-50 ℃ Non -operating | Less than 300 watts | Less than 20 minutes from standby. Less than 40 minutes from the cold start | 28 pounds (12.7kg) | 22 pounds (10kg) |
> 15 w @ 50kHz > 13 w @ 100kHz > 3 w @ 300kHz |
<25ns @ 100kHz | 355nm |
|
|
Talon UV12 |
Available upon quote | AC110/220 ± 10%V, 50 ~ 60Hz | 0 to 2,000 meters operations. 0 ~ 12,000m (when not operating) | <± 10 µrad/℃ | TEM00 | 1.0mm ± 10% | <0.6mrad | <1.1 (>> 90%) | <1mm, <1mrad | Stable to 20 ℃ ± 1 ° C and ± 0.2 ° C | 25 x 6 x 4.5 inches (635 x 153 x 115mm) | 498 x 482 x 88mm (19.6 x 19 x 3.5 inches) | Keep pulse energy, pulse width, and beam parameters constantly over a wide range of repetitions |
<2%RMS @100kHz, representative value Up to 150kHz <3%RMS Up to 300kHz <5%RMS, representative value |
Field service is easy by installing external installation, and you can replace it by customers. | Minimum 1.5 liters/minutes, usually 20 PSI | Less than 300 watts | 8-95%, no condensation | Calibration is possible for external power meters | <1.2 | 100: 1 vertical | 0 ~ 500kHz | The operating temperature is 18-35 ° C. -20-50 ℃ Non -operating | Less than 300 watts | Less than 20 minutes from standby. Less than 40 minutes from the cold start | 28 pounds (12.7kg) | 22 pounds (10kg) |
> 12 W @ 50kHz > 10w @ 100kHz > 3 w @ 300kHz |
<25ns @ 100kHz | 355nm |
|
|
Talon UV6 |
Available upon quote | AC110/220 ± 10%V, 50 ~ 60Hz | 0 to 2,000 meters operations. 0 ~ 12,000m (when not operating) | <± 10 µrad/℃ | TEM00 | 1.0mm ± 10% | <0.6mrad | <1.1 (>> 90%) | <1mm, <1mrad | Stable to 20 ℃ ± 1 ° C and ± 0.2 ° C | 25 x 6 x 4.5 inches (635 x 153 x 115mm) | 498 x 482 x 88mm (19.6 x 19 x 3.5 inches) | Keep pulse energy, pulse width, and beam parameters constantly over a wide range of repetitions | <2%RMS @50kHz, representative value | Field service is easy by installing external installation, and you can replace it by customers. | Minimum 1.5 liters/minutes, usually 20 PSI | Less than 300 watts | 8-95%, no condensation | Calibration is possible for external power meters | <1.2 | 100: 1 vertical | 0 ~ 500kHz | The operating temperature is 18-35 ° C. -20-50 ℃ Non -operating | Less than 300 watts | Less than 20 minutes from standby. Less than 40 minutes from the cold start | 28 pounds (12.7kg) | 22 pounds (10kg) |
> 6 w @ 50kHz > 4 w @ 100kHz > 1 w @ 300kHz |
<25ns @ 100kHz | 355nm |
|
|
Talon GR20 |
Available upon quote | AC110/220 ± 10%V, 50 ~ 60Hz | 0 to 2,000 meters operations. 0 ~ 12,000m (when not operating) | <± 10 µrad/℃ | TEM00 | 1.0mm ± 10% | <0.9mrad | <1.1 (>> 90%) | <1mm, <1mrad | Stable to 20 ℃ ± 1 ° C and ± 0.2 ° C | 25 x 6 x 4.5 inches (635 x 153 x 115mm) | 498 x 482 x 88mm (19.6 x 19 x 3.5 inches) | none |
<2%RMS @ 100kHz, representative value Up to 300kHz <3%RMS 300kHz or more <5%RMS |
Field service is easy by installing external installation, and you can replace it by customers. | Minimum 1.5 liters/minutes, usually 20 PSI | Less than 300 watts | 8-95%, no condensation | Calibration is possible for external power meters | <1.2 | 100: 1 vertical | 0 ~ 500kHz | The operating temperature is 18-35 ° C. -20-50 ℃ Non -operating | Less than 300 watts | Less than 20 minutes from standby. Less than 40 minutes from the cold start | 28 pounds (12.7kg) | 22 pounds (10kg) |
> 20 w @ 50kHz > 18 w @ 100kHz > 13 w @ 300kHz |
<25ns @ 100kHz | 532nm |
|
|
Talon GR40 |
Available upon quote | AC110/220 ± 10%V, 50 ~ 60Hz | 0 to 2,000 meters operations. 0 ~ 12,000m (when not operating) | <± 25 µrad/℃ | TEM00 | 1.0mm ± 10% | <0.9mrad | <1.1 (>> 90%) | <1mm, <1mrad | Stable to 20 ℃ ± 1 ° C and ± 0.2 ° C | 25 x 6 x 4.5 inches (635 x 153 x 115mm) | 498 x 482 x 88mm (19.6 x 19 x 3.5 inches) | none |
<2%RMS @ 100kHz, representative value Up to 300kHz <3%RMS 300kHz or more <5%RMS |
Field service is easy by installing external installation, and you can replace it by customers. | Minimum 1.5 liters/minutes, usually 20 PSI | Less than 350 watts | 8-95%, no condensation | Calibration is possible for external power meters | <1.2 | 100: 1 vertical | 0 ~ 500kHz | The operating temperature is 18-35 ° C. -20-50 ℃ Non -operating | Less than 400 watts | Less than 20 minutes from standby. Less than 40 minutes from the cold start | 28 pounds (12.7kg) | 22 pounds (10kg) |
> 20 w @ 50kHz > 40 w @ 100 kHz > 36 w @ 200kHz > 30 w @ 300kHz |
<25ns @ 100kHz | 532nm |
|
|
Talon GR70 |
Available upon quote | AC110/220 ± 10%V, 50 ~ 60Hz | 0 to 2,000 meters operations. 0 ~ 12,000m (when not operating) | <± 25 µrad/℃ | TEM00 | 2.0mm ± 10% | <0.6mrad | <1.1 (>> 90%) | <1mm, <1mrad | Stable to 20 ℃ ± 1 ° C and ± 0.2 ° C | 28 x 9 x 5 inches (711 x 229 x 127mm) | none | none | Up to 550kHz <3%RMS | Field service is easy by installing external installation, and you can replace it by customers. | 3.5 ~ 6.0 liter/minute, usually 40 PSI | Less than 800 watts | 8-95%, no condensation | Calibration is possible for external power meters | <1.2 | 100: 1 vertical | 0 ~ 700kHz | The operating temperature is 18-35 ° C. -20-50 ℃ Non -operating | Less than 900 watts | Less than 20 minutes from standby. Less than 40 minutes from the cold start | 45 pounds (20.5kg) | none | > 70 w @ 275kHz | <43ns @ 550kHz | 532nm |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Spectra-Physics
View more products of Spectra-Physics
