Small and built -in strain sensor Streal SR300 series
Glocell Co., Ltd.
About This Product
The SR300 series (module) is low power consumption and supports various apps such as IoT. There are SRMS300NB tensile compression type, SRMS345NB shear type.
■ Characteristics
・ Low power consumption 3MW or less
・ Measurement resolution ability 1με
・ Small chips 2.5mm
・ Equipped with a digital temperature sensor
・ Offset temperature drift correction function
・ Snow sensitivity fine -tuning function
・ Wiring is completed in the chip and is strong against noise
-
Product
Small and built -in strain sensor Streal SR300 series
-
Handling Company
Glocell Co., Ltd.
2 Models of Small and built -in strain sensor Streal SR300 series
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Digital communication method | Digital output | Method of bonding | Minimal resolution | Operating temperature | Other 1 | Other 5 | Others 2 | Others 3 | Others 4 | Paste part | Power supply voltage (VDD) | Recommended connector | Terminal: 1 | Terminal: 10 | Terminal: 11 | Terminal: 12 | Terminal: 2 | Terminal: 3 | Terminal: 4 | Terminal: 5 | Terminal: 6 | Terminal: 7 | Terminal: 8 | Terminal: 9 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
SRMS300NB |
Available upon quote | SPI | Equipped with A/D converter (12bit decomposition No ~ 10kSPS) | Recommended for epoxy -based thermal curing type adhesive | ± 1με | -20 ℃ ~ 70 ℃ | Equipped with a digital temperature sensor | Analog output full scale: 0.5V-VDD-0.5V 8 step gain settings: 0.50 [MV/με] to 61.0 [MV/με] | Offset temperature drift correction function | Strain sensitivity fine -tuning function | Wiring is completed in the chip and is strong against noise | Adhesion surface: Paste 12 × 5mm on a plane (not paste of curved surfaces) | 3.3V/5.0V compatible | Hirose FH52-12S-0.5SH (55) | Pdn_b standby mode signal | SCK serial clock input | For Mout test | TRIM devices terminal | VDD power supply voltage | OVDD I/O power supply | VOFS analog offset adjustment | GND reference voltage | SOUT sensor analog output | SDIN serial data entry | SDOUT serial data output | CS chip select |
|
|
SRMS345NB |
Available upon quote | SPI | Equipped with A/D converter (12bit decomposition No ~ 10kSPS) | Recommended for epoxy -based thermal curing type adhesive | ± 1με | -20 ℃ ~ 70 ℃ | Equipped with a digital temperature sensor | Analog output full scale: 0.5V-VDD-0.5V 8 step gain settings: 0.50 [MV/με] to 61.0 [MV/με] | Offset temperature drift correction function | Strain sensitivity fine -tuning function | Wiring is completed in the chip and is strong against noise | Adhesion surface: Paste 12 × 5mm on a plane (not paste of curved surfaces) | 3.3V/5.0V compatible | Hirose FH52-12S-0.5SH (55) | Pdn_b standby mode signal | SCK serial clock input | For Mout test | TRIM devices terminal | VDD power supply voltage | OVDD I/O power supply | VOFS analog offset adjustment | GND reference voltage | SOUT sensor analog output | SDIN serial data entry | SDOUT serial data output | CS chip select |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Glocell Co., Ltd.
View more products of Glocell Co., Ltd.
About Company Handling This Product
- Japan
- Since 1954
- 363 employees