The world's highest class accuracy tension tension tensioning tool HYTORC Nut just by replacing it with a standard nut
Yunex joint company
About This Product
High -talk nuts that have been patented in important applications that require control of the highest level of bolt loads provide a complete joint that leads to the industrial bolt tightening tool industry that can respond to extreme temperature and severe climate. Masu.
■ Characteristics of high -to -talk nuts
The high -to -talk nut is a mechanical tension nut consisting of three points: outer sleeve, inner sleeve, and washer. The zipper, which consists of these three, gives bolts tension, prevents the screws from damaging, and at the same time makes the bolt load accurate. Various tools corresponding to all applications are available, and can be used for extreme temperature and severe climate.
・ Nana bolt load
Other bolting systems do not get the accuracy of the same level of accuracy. By equal to the bolt load, eliminate the leakage of the joint and the loosening of unintended nuts.
・ Long life of tools
Normal industrial bolt stop tools are placed on the opposite side of the tool and a square driving portion on the other side of the tool. So the tools may be damaged over time. High -to -talk nuts remove the majority of internal stress and add action and reaction to the square driving axis to extend the life of tools.
・ Protection of Bolt Screw Mountain
The high talk nut is the only zipper that does not damage the screw screw at the time of decomposition. For more than 10 years, these fasteners have been installed in various high -temperature conditions, reducing the need for bolt replacement without damaging bolts, and led to a large cost reduction.
■ Characteristics of high -to -talk nuts
High talk nuts are three tension systems suitable for difficult use. Because the nut does not rotate the flange surface due to its special structure, the bolt can move with the internal nut without shearing, reaction force or twisting. No complicated and time -consuming measurement is required. You can work hard without a reaction arm. The characteristics of the high talk nut are described below.
・ No backup wrench and reactive arm required
The double structural axis is connected to the main body and the inner axis connects to the nut is the washer inner sleeve and the rotation, and the outer sleeve turns the outer sleeve. By rotating the outer sleeve, the inner sleeve is pulled with the bolt without rotating.
・ Bolt screws do not bite
There is no suspension of work due to biting bolt screws.
・ Do not twist the bolt
There is no bolt relaxation by twisting.
・ Bolt does not turn
You do not need the bottom of the studs or backup wrenches during work.
・ Do not sharpen the seating surface of the equipment
No need to clean the seat
・ Simultaneous driving is possible with high repeated axial strength accuracy
Working time is reduced due to the decrease in the number of replacements.
-
Product
The world's highest class accuracy tension tension tensioning tool HYTORC Nut just by replacing it with a standard nut
-
Handling Company
Yunex joint company
-
Categories
4 Models of The world's highest class accuracy tension tension tensioning tool HYTORC Nut just by replacing it with a standard nut
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) |
|---|---|---|
|
|
CN series |
Available upon quote |
|
|
TN series |
Available upon quote |
|
|
SN series |
Available upon quote |
|
|
SS series |
Available upon quote |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Yunex joint company
View more products of Yunex joint company
About Company Handling This Product
- Japan