All Categories

History

Data transmission is possible with one LAN cable LAN-XI module frame-3660-C-100
Data transmission is possible with one LAN cable LAN-XI module frame-3660-D-100
Data transmission is possible with one LAN cable LAN-XI module frame-Hottinger Brüel & Kjær

Data transmission is possible with one LAN cable LAN-XI module frame
Hottinger Brüel & Kjær


About This Product

It is a rack that can be equipped with a LAN-XI module. A medium -sized and large -scale data collection system can be built and data is transmitted with one LAN cable.

■ Characteristics

・ GPS input terminal, synchronization of sampling between systems in a definition of absolute time and far away. ・ Robust case that can withstand the use of industrial and strict use every day ・ AC power supply (90-264 V AC, 47-63 Hz), DC drive (10 to 32 V), battery (optional) ・ Quiet (when the maximum safety temperature exceeds the temperature, the cooling fan operates) ・ Lan-XI synchronization between phases and sampling between front ends ・ The module is plug and play. It can be easily attached and detached when using it alone, calibration, and repair. ・ The module can be fixed to the housing with a screw It is a data collection frame that can store any LAN-XI input / output module. With 1 gigabit backbone, all channels can be through with full specs. Synchronization with GPS is possible, and there is no need for synchronous cables between systems located away. With the GPS timestamp, the measurement is synchronized with the sampling, so the cross -spectrum between channels can be measured. The 3660-C-100 and the 3660-D-100 are the successor products of the conventional LAN-XI frame 3660-C and 3660-D.

■ Power supply

With a built -in transformer, AC (90-264 V AC, 47-63 Hz) or DC (10-32 V DC) can be used as a power supply. In addition, each frame is battery modizure 2831- Up to two type A can be built in, and when using nine input / output modules, it can be used for up to 40 minutes. The battery can be replaced with the power on (hot swap). PoE cannot be supplied to the frame.

■ DC power output and auxiliary PoE Ethernet Port

In order to supply power to accessories such as LAN switches and wireless LAN when connecting multiple frames, it has a 12 V DC current protection (EIAJ-05 connector). The power cable for these accessories is sold separately. The frame has a wireless access point (WAP) that can supply power with PoE and auxiliary PoE ports for using a camera.

■ Quiet, cooling

Until the unit reaches the secure upper limit temperature of the unit, the sound will work. When the upper limit temperature is exceeded, the cooling fan works.

  • Product

    Data transmission is possible with one LAN cable LAN-XI module frame

Share this product


340+ people viewing

Last viewed: 3 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of Data transmission is possible with one LAN cable LAN-XI module frame

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Power supply requirements AC AC power supply terminal DC input voltage Terminal power consumption Maximum power consumption Battery charging time AC Battery charging time external DC power supply DC power output connector GPS connector LAN Radiation noise fan stop Radiation noise normal (22 ° C) Radiation noise maximum rotation height Depth width Mass (including frame and power supply and others)
Data transmission is possible with one LAN cable LAN-XI module frame-Part Number-3660-C-100

3660-C-100

Available upon quote

Wide range input, 90-264 V DC, 47 ~ 63 Hz

C14 type compliant with IEC/EN60320-1

11 ~ 32 v DC

4-Pole XLR plug

19 W for one LAN-XI module, 70 w for 5 LAN-XI modules

90 w

In the case of one battery module, 3 hours for full charge

Not charged

+12 V ± 1.0 v; up to 1 A (with current protection)

EIAJ-05 (pin φ1.4 mm, outer diameter φ6.5 mm)

SMA

Connector type RJ45 8/8 2, Options Neutrik® EtherCon NE8MC1

10

32

48

177.8mm

420.4mm

224.5mm

5.3kg

Data transmission is possible with one LAN cable LAN-XI module frame-Part Number-3660-D-100

3660-D-100

Available upon quote

Wide range input, 90-264 V DC, 47 ~ 63 Hz

C14 type compliant with IEC/EN60320-1

11 ~ 32 v DC

4-Pole XLR plug

25 W for one LAN-XI module, 150 w for 11 LAN-XI modules

200 w

In the case of one battery module, 3 hours for full charge

Not charged

+12 V ± 1.0 v; up to 1 A (with current protection)

EIAJ-05 (pin φ1.4 mm, outer diameter φ6.5 mm)

SMA

Connector type RJ45 8/8 2, Options Neutrik® EtherCon NE8MC1

5

37

51

177.8mm

420.4mm

388.5mm

7kg

Click on the part number for more information about each product

Other products of Hottinger Brüel & Kjær

Reviews shown here are reviews of companies.


View more products of Hottinger Brüel & Kjær

About Company Handling This Product

Company Overview

HBK, formerly named HBM, is a global ISO9001 and ISO14001-certified company founded in 1950. It is known for p...

See More

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree