All Categories

History

Maintain a constant and accurate vibration level 4292 calibration (handheld, battery drive)-4294
Maintain a constant and accurate vibration level 4292 calibration (handheld, battery drive)-Hottinger Brüel & Kjær

Maintain a constant and accurate vibration level 4292 calibration (handheld, battery drive)
Hottinger Brüel & Kjær

Hottinger Brüel & Kjær's Response Status

Response Rate

100.0%

Response Time

22.7hours

Relatively Fast Response


About This Product

■ Overview

This instrument has a built-in dweller driven by a crystal transmitter of 159.15 Hz (1,000 RAD S^-1). Servo feedback with a small accelerator attached to the back of the vibration stand maintains a constant and accurate vibration level, regardless of the mass of transducers to be calibrated. If a transducer with a mass exceeding a certain level is attached to this vibration table, the power of the vibrator is automatically cut to avoid overload. It is very easy to use. The target transducer is easily attached to the vibration table by 10 to 32 UNF steel screws (YQ 2963). In addition, the attached 10 Gram mounting disc (DB 2996) can be easily attached to the transducer manufactured by 3 mm screws or on the mounting magnet UA0642. This mounting disc can also fix the transducer with bead wax and instant adhesive. This instrument works by pressing the small button on the side of the housing. After adjusting the system, press this button again to turn off the switch.

■ Use

・ Vibration transduca precision school calibration ・ Short calibration and check ・ Quick and simple on -site calibration of vibration measurement and recording system

■ Features

・ Small, lightweight, battery operation ・ Skin case for shock protection ・ Designed for everyday use in harsh environments ・ Calibration of acceleration, speed, and displacement ・ High accuracy of 159.15 Hz (1,000 RAD S^-1), crystal control servo operation ・ IEC 60068 Fall of compliant and environmental tests ・ IP54 (IEC 60529) Supplied structure of compliant

  • Product

    Maintain a constant and accurate vibration level 4292 calibration (handheld, battery drive)

Share this product


550+ people viewing

Last viewed: 16 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

2 Models of Maintain a constant and accurate vibration level 4292 calibration (handheld, battery drive)

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Frequency (Hz) Acceleration (MS^-2 (RMS)) Speed ​​(mms^-1 (RMS)) Displacement (μm (RMS)) Horizontal amplitude distorted Built -in battery Battery life Warming up time (seconds) Signal duration (seconds) Long -term stability length size weight Maximum load on transduca (Gram) Maximum torque (NM) installed in transduca Mounting screws installation of transduca
Maintain a constant and accurate vibration level 4292 calibration (handheld, battery drive)-Part Number-4294

4294

Available upon quote

159.15 ± 0.02%

10 ± 3%

10 ± 3%

10 ± 3%

Less than 5 % of the main shaft amplitude

Achieved less than 2%for 10 to 70 Gram load, less than 7%(representative value) for 0 to 10 Gram load, ultra -lightweight acceleration pickup and DB 2699 (10 Gram)

9V Alkaline Battery QB 0016 (IEC Type 6LR61) 1 piece

Approximately 200 calibration, at the time of automatic switch -off after 100 seconds

Less than 5

103 ± 1 second (when automatically stops)

Acceleration, speed, and displacement are less than 1 % per year, frequency less than 10 ppm per year

155 mm (6.1 in)

52 mm (2.05 in)

500 Gram (17.6 OZ) Includes batteries and skin cases

70

Max. 0.5

10 ~ 32 Unf

Maintain a constant and accurate vibration level 4292 calibration (handheld, battery drive)-Part Number-4294-002

4294-002

Available upon quote

159.15 ± 0.02%

3.16 ± 3%

3.16 ± 3%

3.16 ± 3%

Less than 5 % of the main shaft amplitude

Achieved less than 2%for 10 to 200 Gram load, less than 7%(representative value) for 0 to 10 Gram load, ultra -lightweight acceleration pickup and DB 2699 (10 Gram)

9V Alkaline Battery QB 0016 (IEC Type 6LR61) 1 piece

Approximately 200 calibration, at the time of automatic switch -off after 100 seconds

Less than 5

103 ± 1 second (when automatically stops)

Acceleration, speed, and displacement are less than 1 % per year, frequency less than 10 ppm per year

155 mm (6.1 in)

52 mm (2.05 in)

500 Gram (17.6 OZ) Includes batteries and skin cases

200

Max. 0.5

10 ~ 32 Unf

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Vibrators Products

Other products of Hottinger Brüel & Kjær

Reviews shown here are reviews of companies.


View more products of Hottinger Brüel & Kjær

About Company Handling This Product

Response Rate

100.0%


Response Time

22.7hrs


Company Review

5.0

Company Overview

HBK, formerly named HBM, is a global ISO9001 and ISO14001-certified company founded in 1950. It is known for p...

See More

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree