FMCW type radio station license application No required microwave invasion monitoring sensor
Pal Giken Co., Ltd.
About This Product
■ Invasion monitoring sensor that can measure distance strongly in the natural environment
Unlike the conventional doppler method and infrared blocking method, the invasion is detected by the distance and reflection level by adopting the FMCW method. Most of the mistakes can now be reduced compared to the past. It complies with the 24GHz band specified small power radio station, the technical standard conformity certificate (ARIB STD-T73), and there is no need to apply for a troublesome wireless station license when using it. It can also be used indoors and outdoors in Japan.
■ Characteristics
・ Strong in the natural environment
It is resistant to weather conditions such as rain, wind, snow, fog, light, etc., and provides high reliability even outdoors in the environment.
・ Long -distance monitoring is possible
In the case of the human body, the detection distance can be monitored with a maximum of 200m, an independent type and a maximum of 100m.
・ Cover a wide detection area
The detection area depends on the beam angle of the antenna and covers a wider detection area in a sensor unit compared to the infrared sensor.
・ Invasion position detection is possible
Since the entry position can be detected, it is possible to provide an invasion detection area and a non -detection area.
・ Easy installation adjustment and improvement of sensor
There is no need for severe optical matching like infrared sensors.
Since sensor confidence can avoid radio interference, it is easy to add sensors.
・ Reduce misinformation
The FMCW method is used to detect invasion at the distance and the reflection level, which can reduce misinformation.
■ Application examples
・ Outer peripheral monitoring of important facilities
Use the microwave sensor installed on the outer periphery of the facility to detect people in the facility in real time.
-
Product
FMCW type radio station license application No required microwave invasion monitoring sensor
-
Handling Company
Pal Giken Co., Ltd.
2 Models of FMCW type radio station license application No required microwave invasion monitoring sensor
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Antenna orientation | Detection method | Detection range (independent type) | Detection range (opposite type) | External dimensions | Frequency bandwidth | I/f | Material | Measurement cycle | Measurement method | Ocean output power | Operation peripheral temperature | Oscillation frequency | Save surrounding temperature | Simultaneous operation number | Technical conformity | Waterproof level | power consumption | power supply | weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
BSS01 |
Available upon quote | Horizontal surface: Approximately 6 ° vertical surface: about 15 ° |
Independent: microwave beam reflection detection method View: Microw wave beam blocking detection method |
Detection range: 3.5 ~ 100m (reference reflector) Remark width: According to the antenna angle Conditions: Weeds and trees without trees |
Detection distance: 0 to 200m (reference reflector) Conditions: Weeds and trees without trees |
190 (W) x 196 (H) x 92 (d) mm | 200MHz Max. |
2 points of alarm output, 1 point during monitoring Tamper contact output 1 point (BSS01 only) Ethernet (100BASE-TX/10BASE-T) |
Redome part: AES Back cover: Aluminum |
Max. 10msec/1 time measurement | FMCW method | 10MW Max. | -20 ~ 60 ° C (freezing, no condensation) | 24.05 ~ 24.25GHz | -30-75 ° C (freezing, no condensation) | Up to 46 units can be installed within 400m radius | Compliant with ARIB STD-T73 (limited to Japan) |
IP67 equivalent (dust -resistant immersion) Cable conformity outer diameter: φ8.5 ~ 14 (1 hole) Compatible connector outer diameter: φ14 or less (RJ-45 plug compatible) |
Typ.7.5W (Max.15W) |
DC type: DC11 ~ 30V PoE Type: IEEE 802.3AF compliant |
2kg or less |
|
|
Bsm02 |
Available upon quote | Horizontal surface: Approximately 6 ° vertical surface: about 15 ° |
Independent: microwave beam reflection detection method View: Microw wave beam blocking detection method |
Detection range: 3.5 ~ 100m (reference reflector) Remark width: According to the antenna angle Conditions: Weeds and trees without trees |
Detection distance: 0 to 200m (reference reflector) Conditions: Weeds and trees without trees |
180 (W) x 152 (H) x 52.5 (D) mm | 200MHz Max. |
2 points of alarm output, 1 point during monitoring Tamper contact output 1 point (BSS01 only) Ethernet (100BASE-TX/10BASE-T) |
Redome part: AES Back cover: AES |
Max. 10msec/1 time measurement | FMCW method | 10MW Max. | -20 ~ 60 ° C (freezing, no condensation) | 24.05 ~ 24.25GHz | -30-75 ° C (freezing, no condensation) | Up to 46 units can be installed within 400m radius | Compliant with ARIB STD-T73 (limited to Japan) | Equivalent to IP30 | Typ.7.5W (Max.15W) | DC11 ~ 30V | 0.9kg or less |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Pal Giken Co., Ltd.
View more products of Pal Giken Co., Ltd.
About Company Handling This Product
- Japan
- Since 1992
- 44 employees