Hybrid insulation paint Rohascoat demo kit set
OKUTA Co., Ltd.
About This Product
■ Comparison kit
Irradiate a light bulb and compare the temperature. LOHAS COAT has a gentle temperature rising compared to ordinary paint, and a temperature difference of about 10 ° C in about 5 to 10 minutes after irradiation. If irradiated continuously, the temperature difference around 5 ° C can be confirmed depending on the indoor temperature.
In addition, remove the bulb part, and after confirming that the temperature of the iron plate has dropped, spray the steep cooling agent alternately three round trips. You can see that the temperature of the iron plate applied to LOHAS COAT is hard to drop. The one whose surface is rough is LOHAS COAT.
When cooling, be sure to remove the light bulb and spray a steep cooling agent. If you cool with the light bulb, the bulb may burst. In addition, when the temperature of the iron plate has not been dropped, the deterioration of the coating will deteriorate quickly and cracks will occur.
■ Insulation performance experience cup
・ It is a cup that puts hot water (about 55 to 60 ° C) in both cups and experience how to transmit heat.
・ The one with a rough surface is a cup applied to LOHAS COAT.
・ If you touch it for a long time, you may be burned. Also, please note that hot water that is too hot is dangerous.
■ LOHAS COAT raw material sample (main agent)
・ Please take the cap and push out the bottle side strongly. You can see how LOHAS COAT has stickiness.
・ Because the adhesive is very strong, the main agent does not fall even if it is upside down.
-
-
Product
Hybrid insulation paint Rohascoat demo kit set