High-bond anchor FHB-Ⅱ-A L (long version) High corrosion-resistant stainless steel
Fisher Japan Co., Ltd.
About This Product
The best performance with the maximum tensile load in cracked concrete-even in an environment with high corrosion. High corrosion -resistant stainless steel (equivalent to SUS836L)
◼︎ Overview
・ Fisher High Bond Special Anchor Rod FHBⅡ-AL is a high-bond FHBⅡ system configuration.
・ Torque -managed adhesive anchors are suitable for maximum tolerance in concrete without cracks and cracks.
・ It is optimized for a narrow helicopter space with cracked concrete.
・ As an example, FHBⅡ is attached to the installation of a facade substructure, silo, steel frame, etc.
-The conical anchor rod is ETA authentication along with FISHB injection method/cartridge type or FHBⅡ-P and FHBⅡ-PF glass capsules.
・ The deep embedded depth of the anchor rod is the maximum allowable load.
・ Maximum load is possible depending on the large perforation depth. As a result, smaller sprinkles with less fasting.
・ Installation plate of the number of ministry anchors and the size of the reflection size.
・ Made of high corrosion -resistant metal for high corrosive areas
◼︎ Product details
・ The deep embedded depth of the FHBⅡ-AL special anchor rod is a system that supports the maximum allowable load. Installation plate of the number of ministry anchors and the size of the reflection.
・ The conical shape of the anchor rod of FHBⅡ-AL is particularly optimized for high tensile load. The best performance in cracked concrete.
・ FHBⅡ-AL anchor rod is ETA authentication for both glass capsules and injection methods/cartridge type. Maximum flexibility in applications.
・ FHBⅡ-AL anchor rod is used in combination of FHBⅡ-P/-PF glass capsules. Create in a short time.
・ When using FHBⅡ-AL in the combination of FISHB, no other additional tools are used, and installed in the lower hole gap of the mounting.
-Drill holes are possible by using a mortar cartridge.
・ Obtained European Technology Certification (ETA) regarding cracked concrete
◼︎ Use
·guardrail
·facade
・ Stairs
・ Metal bracket
·device
・ Silo construction
·mast
・ Prevention of scratches
・ Steel structure
・ Wood structure
◼︎ Maternal material
Certified
・ Concrete C20/25 -C50/60 (no cracks/with no cracks)
Other applications
・ Concrete C12/15
See the registration documents for details on building materials.
◼︎ Certification
・ ETA-05/0164
・ Dopno.0280
・ Dopno.0282
・ (2103/12/12) -cm
・ GS3.2/16-352-1
◼︎ Construction method
・ FHBⅡ-AL is a torque-controlled adhesion-based anchor for pre-mounting and in-kind installation.
・ When using FHBⅡ-AL in the actual installation, fill the lower hole gap of the mounting material in the Fishb injection method.
-The anchor rod is set in the FISHB injection method or FHBⅡ-P/FHBⅡ-PF glass capsule to fill the drill hole.
・ When the nut is tightened with a specified torque, the anchor rod cone is pulled up to the resin shell, and the anchor rod cones push the drill holes via the resin to the extension as an expansion anchor.
・ Fill the drill hole with styrene -free vinyl ester resin.
・ When using a glass capsule, use a hammer drill to set a special anchor rod for rotating operation. Use the setting tool RA-SDS (part number 62420).
-
-
Product
High-bond anchor FHB-Ⅱ-A L (long version) High corrosion-resistant stainless steel