Wire discharge precision contour machine TX150
Tynatec Co., Ltd.
About This Product
■Simple wire mechanism
Approximately 200m of molybdenum wire is wound around a wire winding drum and the same wire can be used repeatedly for a long time by rotating it in forward and reverse directions. Molybdenum wire has high strength, toughness, and durability, and can be electrically discharged for about 50 hours under normal machining. The wire travels across the workpiece cross section at a speed of up to 11m/sec, promoting chip evacuation and increasing machining efficiency.
■Features of processing table
Machining fluid is directly discharged from the top and bottom of the electrical discharge machining section to remove chips and cool it. Since the workpiece is not immersed, it is easy to process thick and long materials. In addition, it is easy to attach fixing jigs such as chucks, so it can be used with a wide variety of materials.
■Design and specifications aimed at increasing setup efficiency
The wire running parts such as the guide wheel (power feeding part) and guide block are V-groove type, so there is no need for detailed work such as passing the molybdenum wire through the hole.
■Easy CAD/CAM software included as standard
You can set the drafting, machining path, and condition values using our special processing software, making it easy to operate even without CAD/CAM knowledge. It is possible to read DXF files, so there is no need to recreate drawings. Necessary machining data can be recalled from the saved machining program and sent to the machine body.
■Running costs reduced by more than 50%
The initial cost is lower than that of wire cutting, and the running cost of the wire can also be significantly reduced.
Molybdenum wire cost...64 yen/h No ion exchange resin required.
■Reliable support system
Our service staff will perform installation work, test runs, and operation checks to ensure the machine is delivered in optimal condition. At the time of delivery, we will provide operating instructions and training to resolve any concerns or questions you may have regarding use. After-sales service, we provide accurate advice, maintenance, and parts replacement in a flexible and prompt manner.
-
Product
Wire discharge precision contour machine TX150
-
Handling Company
Tynatec Co., Ltd.
-
Categories
1 Models of Wire discharge precision contour machine TX150
| Product Image | Part Number | Price (excluding tax) | Allowable mass of workpiece (kg) | Electrode wire diameter (mm) | Electrode wire speed (m/sec) | Machine installation dimensions (mm) | Machine weight (kg) | Machining accuracy Finish cut (3 times machining) | Machining accuracy First cut (one time machining) | Machining speed (*Reference value) Aluminum | Machining speed (*Reference value) Difficult-to-cut materials | Machining speed (*Reference value) General iron type | Machining speed (*Reference value) Magnesium | Maximum processing height (mm) | Processing table dimensions (mm) | XY axis travel (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
TX150 |
Available upon quote | 80 | Φ0.18~0.20 | 0.8~11 | 1,400×700×1,600 | 800 | ±0.01mm | ±0.03mm | 180~230mm2/min | 80mm2/min | 100~160mm2/min | 500mm2/min | 250 | 380×380 | 250×150 |
Customers who viewed this product also viewed
Other products of Tynatec Co., Ltd.
View more products of Tynatec Co., Ltd.
About Company Handling This Product
- Japan