LCD display counter/timer CX Series
Autonics Corporation
About This Product
■Summary
The CX series counter/timer equipped with a variety of functions uses an LCD display to provide excellent visibility, and the 11-segment current value display makes it easy to distinguish characters and provides excellent readability. In addition, it has a short depth of 64.5mm, minimizing the installation space.
It is now possible to select input methods such as voltage input (PNP) / non-voltage input (NPN) selection type, free voltage input type, and supports 6-digit free scale value setting, further improving user convenience. .
■Features [Common]
・Excellent visibility with LCD display
・Input method: Voltage input (PNP) / non-voltage input (NPN) selection type (set by parameter), free voltage input type available
・One-Shot output time can be set in 0.01 second increments from 0.01 seconds to 99.99 seconds
・Reduced installation space due to compact design (rear length: 64.5mm)
■Features [Counter]
・Free scale value setting range: 0.00001 to 9,999.9
・Various input/output modes (input: 11 types, output: 11 types)
・Start Point (counting initial value) setting function
・TOTAL counter display mode: Check the current count value and integrated count value at the same time
■Features [Timer]
・Various output modes (15 types)
・Wide time setting range: 0.001 seconds to 9,999.9 hours
・“0” time setting function
■Maximize usability by dual use as counter/timer
One product can be used as both a counter and a timer, maximizing the usability of the product.
■Excellent visibility thanks to LCD display
The use of an LCD display allows you to clearly check displayed values from a variety of angles, up, down, left, and right, providing excellent visibility.
■NPN/PNP input can be selected by parameter setting
Convenience of use has been improved as NPN or PNP input can be selected with a single product by parameter setting.
■Wide range of free scale values
The wide range of free scale values from 0.00001 to 9,999.9 allows for a wide range of expression, so it can be used for precision control.
■Achieved miniaturization of the product with a rear length of 64.5mm
The rear length is up to 28% shorter than conventional products, and the short length of 64.5 mm minimizes the installation space.
-
Product
LCD display counter/timer CX Series
-
Handling Company
Autonics Corporation
-
Categories
1 Models of LCD display counter/timer CX Series
| Product Image | Part Number | Price (excluding tax) | Control output classification | Control output relay | Counter_counting range | Counter_scale | Display method Count display section | Display method Setting display section | Environmental resistance Ambient humidity | Environmental resistance Operating ambient temperature | Maximum counting speed | Minimum signal width | Operation method Counter | Operation method Timer | Output operation | Power outage compensation | Power supply voltage | Protective structure | Setting range | Signal input method | Terminal configuration | Time operation | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
CX6S-2P4F |
Available upon quote | 2 stage preset | SPST (1a) 2 pieces | -99,999~999,999 | 5 decimal places | 2digit 7 segment LCD, 4digit 11 segment LCD | 6digit 7 segment LCD | 35~85%RH, during storage: 35~85%RH | -10~55℃, during storage: -25~65℃ | 20[cps] | 25ms | Addition, subtraction, addition and subtraction | Addition, subtraction | SIGNAL ON DELAY, POWER ON DELAY, ON-OFF DELAY | About 10 years | 100-240VAC~ 50/60Hz | IP50 (front) | 0.001 seconds to 999.999 seconds, 0.01 seconds to 9,999.99 seconds, 0.1 seconds to 99,999.9 seconds, 1 second to 999,999 seconds, 0.01 seconds to 99 minutes 59.99 seconds, 0.1 seconds to 999 minutes 59.9 seconds, | Free voltage input | Terminal block | POWER ON START SIGNAL ON START | Approx. 160g (approx. 115g) |
Customers who viewed this product also viewed
Other products of Autonics Corporation
View more products of Autonics Corporation
About Company Handling This Product
- Japan