All Categories

History

Airtightness inspection equipment for small electronic components Bombing/Gross/Fine leak test system MSX-7000 series MSX-7000-00-MSX-7000-00
Airtightness inspection equipment for small electronic components Bombing/Gross/Fine leak test system MSX-7000 series MSX-7000-00-FUKUDA CO., LTD.

Airtightness inspection equipment for small electronic components Bombing/Gross/Fine leak test system MSX-7000 series MSX-7000-00
FUKUDA CO., LTD.

💻 Electronics & Electrical Use

FUKUDA CO., LTD.'s Response Status

Response Rate

100.0%

Response Time

18.4hours

Relatively Fast Response


About This Product

■What is the airtight inspection device for small electronic components?

This equipment performs leak tests on small electronic components that require airtightness, such as crystal devices, ceramic resonators, optical devices, power semiconductors, CAN devices, laser diodes, MEMS devices, SAW filters, small relays, and capacitors. Leak testing of sealed products requires two types of inspection: gross leak test and fine leak test. We have a lineup of fully automatic machines that can perform the entire process on one machine, special machines (custom-made), and tabletop types that are convenient for sampling inspections. We perform leak tests while controlling the conditions for bombing (helium immersion), gross leak tests, and fine leak tests. First in the industry to support 1.0 x 0.8mm size. Transport accuracy has been improved by position correction using image processing. Leak test system for airtightness inspection of sealed packaged products such as small electronic components, crystal resonators, MEMS/optical devices, and various sensors. Compatible with ultra-small packages 1.0×0.8 and 1.2×1.0mm.

■Specifications

・Achieved 1.0 x 0.8 size inspection for the first time using a new mechanism ・Improved conveyance accuracy by position correction using image processing ・Complete bombing and gross/fine leak tests with one machine (control of conditions such as helium bombing time, pressure, and standing time) - Improved gross leak sensitivity to the industry's highest sensitivity of 8.5 x 10-Pa m3/s (equivalent standard leak amount) Compatible models vary depending on work size.

■Standard equipment. accessories

Standard equipment HEPA filter, dry vacuum pump, air dryer, regulator, signal tower, filter regulator unit Setup replacement parts These are parts that are replaced when changing types. ① Inspection parts (complete set of parts including capsule) ② Transportation parts (tip block, chute) Note) In the following cases, the parts feeder will be shipped separately. ①Thickness 0.5mm or more H type or thermistor type glass type

  • Product

    Airtightness inspection equipment for small electronic components Bombing/Gross/Fine leak test system MSX-7000 series MSX-7000-00
  • Usage Scenarios

    Electronics & Electrical Use

Share this product


80+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Airtightness inspection equipment for small electronic components Bombing/Gross/Fine leak test system MSX-7000 series MSX-7000-00

Image Part Number Price (excluding tax) Power supply voltage/power consumption Mass Display Pneumatic source Inspection target size (mm) External dimensions (mm) *Excluding signal tower and LCD panel Discrimination level (Pa・m3/s) Processing speed Usage temperature and humidity range Helium source nitrogen source Helium source/nitrogen source Barcode reader He calibrator
Airtightness inspection equipment for small electronic components Bombing/Gross/Fine leak test system MSX-7000 series MSX-7000-00-Part Number-MSX-7000-00

MSX-7000-00

Available upon quote

AC200V±10% three-phase 50/60Hz・4kVA

Approximately 1,500kg

Touch panel 10.4 inch

Air pressure source: 0.5MPa or higher Please use clean, dry air that does not fluctuate.
Recommended conditions: Compressed air cleanliness class 1, 3, 1 according to JISB8392-1:2012

1.0×0.8, 1.2×1.0

W1,800×D1,400×H1,800

Gross leak: 2×10^-7Pa・m3/s (equivalent standard leak)
Fine leak: 1×10^-9Pa・m3/s (He)

12ch1.0s/pcs (bombing 60min)

0-40℃45~85%RH (no condensation)

Connection Rc1/4 device External cylinder Pressure regulation to 0.6MPa Purity 99.99% or more

Adjust the cylinder outside the device to 0.6MPa, purity 99.99% or more

None

None *Can only be selected if you already have it

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Leak Testers Products

Other products of FUKUDA CO., LTD.

Reviews shown here are reviews of companies.


View more products of FUKUDA CO., LTD.

About Company Handling This Product

Response Rate

100.0%


Response Time

18.4hrs


Company Review

5.0

Company Overview

Fukuda Co., Ltd. is a manufacturer of inspection equipment for industries such as automobiles, aircraft, elect...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree