Electromagnetic flowmeter B-MAG M5000
Showa Kiki Instrumentation Co., Ltd.
About This Product
■Features
- Battery powered, no power supply required
・Life span up to 10 years
・Battery replaceable
- Comes with a battery level display that lets you know when to replace it at a glance
・Wide flow range
- Adopts PTFE lining and Hastelloy C electrode as standard.
・Flanged type allows for reliable piping
・Equipped with a variety of outputs such as integrated pulses and alarm contacts
- Conforms to ISO standards with excellent compatibility between surfaces
- Converter integrated type (M5000-M) and converter separated type (M5000-S) are available.
■Advantages
・Almost unaffected by liquid temperature, pressure, density, and viscosity.
・If the conductivity is above a certain level (20μS/m, (5μS/m) or higher), the volumetric flow rate can be measured without being affected by the conductivity. Therefore, regardless of the type of fluid being measured, the actual flow rate can be calibrated using water (the average conductivity of rivers in Japan is 50 to 100 μS/cm).
・There are no obstacles in the measurement tube that create resistance, so there is no pressure loss.
・Volume flow rate can be measured even for solids and liquids containing bubbles.
・The output of the flowmeter is proportional to the flow rate. It is relatively accurate.
・``JIS B 7554'' specifies a wide range of detector diameters from 10 to 2600 mm. Measurements can be made using the same principle over a wide flow rate range.
- Generally responsive.
・Can measure forward and reverse flow rates.
・There are no moving parts.
■Disadvantages
- Gases and liquids with low conductivity cannot be measured.
・In the case of large diameter, it is relatively expensive and installation work is expensive.
・A straight pipe section is required to straighten the flow (specified in JIS B 7554). However, there is no problem with the short straight pipe length compared to differential pressure flowmeters.
- For corrosive fluids, it is necessary to consider the lining material, electrode, and wetted ring material.
-
Product
Electromagnetic flowmeter B-MAG M5000
-
Handling Company
Showa Kiki Instrumentation Co., Ltd.
-
Categories
1 Models of Electromagnetic flowmeter B-MAG M5000
| Product Image | Part Number | Price (excluding tax) | Accuracy | Ambient temperature | Caliber | Conductivity | Display | Material | Measuring range | Output | Power supply | Protection class | Temperature range | Wire port |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
B-MAG M5000 |
Available upon quote |
0.5~10 m/sec=±0.3%R.D 0.03~0.5 m/sec=±0.0025m/sec Accuracy is not guaranteed below 0.03 m/sec |
-20~60℃ | 15A~400A: JIS10K-RF | 20μS/cm or more |
LCD display (upper 7 digits, lower 8 digits) Instantaneous/integrated display is switched on the upper row |
Converter case body: Aluminum (painted) Detector case body: Carbon steel (painted) Flange material: carbon steel (painted) Lining: PTFE Electrode: Hastelloy C |
0.03~10m/sec |
Integration, upper and lower limit alarm, empty detection, error, flow direction (Open collector output MAX DC30V 20mA) |
3.6V lithium battery | IP67 | 0~100℃ | Case side connection screw: M20 female screw Applicable cable diameter 7~13mm x 4 |
Customers who viewed this product also viewed
Other products of Showa Kiki Instrumentation Co., Ltd.
View more products of Showa Kiki Instrumentation Co., Ltd.
