4-contact notification device for general telephone lines WhiteLock110A20 WL110A20
Adcon Co., Ltd.
About This Product
WhiteLock110A20 is a monitoring device that connects to a regular telephone line.
■General telephone lines that can be used
・You can use the TA analog port for NTT specification analog lines [2-wire push or dial lines (20PPS)], PBX (2-wire outside line), and ISDN lines.
- We cannot guarantee operation via routers such as modems and terminal adapters.
■About use on extension lines
・When using an extension, please check that all of the conditions below are met.
・When you pick up the handset, you can hear DT (dial tone) 400Hz continuous or PDT (extension dial tone) 400Hz 0.25 seconds ON and 0.25 seconds OFF.
・When the other party is busy, you can hear BT (busy tone) 400Hz 0.5 seconds ON and 0.5 seconds OFF.
・When calling the other party, you can hear RBT (Ring tone (jiggly sound)) 400Hz 1 second ON and 2 seconds OFF.
・When the other party disconnects the call, you can hear BT (busy tone) 400Hz 0.5 seconds ON and 0.5 seconds OFF.
・Some PBXs may only play the busy tone four times after disconnecting the call. please note.
■Unusable telephone line
- Cannot be used on business phone lines or home telephone lines.
- If you connect the WL110A20 to these lines and perform reporting operations, the WL110A20 will malfunction.
■How to check the line
You can connect an NTT telephone (available at home electronics stores, home centers, etc.) to an extension line, and then connect the WL110A20 if the line allows calls to an outside line. If you cannot make outside calls, use the business phone line or home phone line.
■If there is no telephone line nearby
Using the remote control 8N (signal transmission device), it is possible to wirelessly transmit alarm contact signals to a remote telephone line.
■Product contents
・1 USB cable
・AC adapter 1 piece
・Modular cable 1 piece
・Battery (built-in to the main unit) 1 piece
・Terminal block (already attached to the main unit) 1 piece
・1 piece of warranty
-
Product
4-contact notification device for general telephone lines WhiteLock110A20 WL110A20
-
Handling Company
Adcon Co., Ltd.
-
Categories
1 Models of 4-contact notification device for general telephone lines WhiteLock110A20 WL110A20
| Product Image | Part Number | Price (excluding tax) | AC adapter (V) | Applicable line | Audio memory backup | Audio recording method | Audio recording time (seconds) | Automatic call | Built-in battery (mAh) | Busy detection function | Calling phone number setting | Correspondence method | Current consumption of main body DC jack part (mA) | Dimensions W×H×D (mm) | Email sending | External interface | Line connection method | Number of signal input points | Operating humidity range (%) | Operating temperature range (℃) | Operation settings | Power outage recovery detection function | Recording and playback method | Reporting during power outage | SMS mail sending | Selected signal type | Surrounding environment | Weight (g) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
WL110A20 |
Available upon quote | DC12 1A output Not covered by warranty if the included AC adapter is not used | NTT specification analog telephone line (2-wire type) | Not required (flash memory) | Direct recording method without compression | Equipped with 8 channels, 1 channel 12.5, total 100 | Input change detection time setting available | 006P DC9V 250 Ni-MH rechargeable battery | Yes (redial when busy or communication cannot be established) | Up to 6 locations | Voice and DTMF call system emergency notification device | Standby 41 (max. 60) Do not use direct DC power input. | 149.3×85.3×25 | Possible (using email sending system) | Cannot connect to USB2.0 USB hub | Communication connector (modular jack) | 4 points (voltage-free contact or open collector) | 15~80 (no condensation) | 0~40 | Transferring settings using dedicated computer software | Built-in power failure detection function inside the main unit | Equipped with microphone and speaker (record/stop/play button operation) | About 1 hour with built-in battery | Maximum of 6 locations Report destinations must be mobile terminals that can receive SMS with a Docomo line contract | Push button (PB) or dial pulse (DP:20PPS) | Please protect the product with a cover, etc. when using it in a place that is free of corrosive gas and has heavy dirt such as dust. | Approximately 200 Weight including terminal block and battery |
Customers who viewed this product also viewed
Other products of Adcon Co., Ltd.
View more products of Adcon Co., Ltd.
About Company Handling This Product
- Japan