This product is registered by Japan INSDAC Co., Ltd..
About This Product
LCR meter BR6832 is a new generation impedance test equipment with high precision, wide measuring range and 6-digit resolution. With test frequencies up to 200kHz and test voltages from 10mV to 2V, it meets all requirements for measuring components and materials and provides guarantees for quality assurance in production lines, acceptance inspections and precision measurements in the laboratory.
■Features
・High performance and small size
・Test frequency: 50Hz-200kHz, 10mHz step
・Accuracy: 0.05%, 6-digit resolution
・L and DCR can be measured simultaneously without interference; self-demagnetizing
・Automatic LCR function
・100 point list sweep function
・Save test data to USB disk
specification
■Measurement function
・Test parameters: |Z|,C,L,R, X, |Y|,B,G,ESR,D,Q,θ DCR
・Basic accuracy: 0.05%
・Measurement speed: high speed 12.5ms, medium speed 83ms, low speed 167ms (measurement/second)
・Equivalent circuit: series and parallel
・Range mode: automatic, hold
・Trigger mode: internal, manual, DUT, external, bus
・Display mode: direct reading, Δ, Δ%
・List sweep: 100 points frequency, level, bias voltage/current, DC source
・Correction: Open/Short/Load
・Display: 4.3 inch TFT color screen
・Memory: Internal 100 groups, external 500 groups (USB disk)
■Test signal
・Test frequency: 50Hz – 200kHz, resolution 10mHz
・Output impedance: 30Ω, 50Ω, 100Ω
・Test level: 10mV-2.0V, resolution 10mV, 100uA-20mA
・Internal DC bias source: 0V ——±5V / 0mA ——±20mA
■Measurement display range
・Ls, Lp: 0.00001μH ~ 99.9999kH
・Cs, Cp: 0.00001pF to 99.9999mF
・R, Rs, Rp, X, Z: 0.00001Ω to 99.9999MΩ
・G, Y, B: 0.00001μS to 99.9999S
・DCR: 0.001mΩ to 99.9999kΩ
・ESR:0.01mΩ~99.9999kΩ
・D:0.00001~99.9999
・Q:0.00001~99999.9
・qr:-3.14159~3.14159
・qd:-180.000°~180.000°
・D%:-99.9999%~999.999%
Share this product