Excellent thermal conductivity cooling fan motor HS4506 Series (Squid End!)
Hirosawa Seiki Works
About This Product
Metal feather AC axis stream fan (120 square x 38mm thick)
■ What is a cooling fan motor?
In general, inexpensive fans for installation of the device can be found with feathers with feathers on the axis of the induction motor, but it becomes a long fan motor in the motor axis direction, and depending on the device, the housing itself may be larger for the fan. Also, if the motor diameter is large, the air introduced in the feathers cannot be efficiently flowing.
The cooling fan motor incorporates a motor inside the rotating feather, and can make the axial direction in which the wind rises rises very thin compared to a product that combines feathers and motors.
■ Characteristics
Our fan motor is an AC fan motor that is a total metal that is directly welded by metal feathers directly welded metal feathers on the outer rotor -type motor rotation part with a relatively inexpensive type with resin feathers attached to a general inner rotor type motor rotation.
The heat coming out of the coil inside the fan motor is difficult to transmit to the outside when resin material is intervened, but all metal types are excellent in thermal conductors, and they are released to the outside through the feathers, so the temperature of the bearing portion is also reduced and long life is expected.
■ Use
Every device, such as a computer, server, OA device, and home game equipment, a power distribution board, a control device, a large power supply device, a large power exchanger, and an uninterruptible power supply device, the high -performance, high -density, and miniaturization have progressed, and the temperature increases inside, and forced cooling is also required even for the natural air -cooled device.
By attaching a cooling fan motor, the outside cold air is introduced, and the heat generated inside the device is discharged to the outside and used to lower the temperature. In some cases, in a part of the constant temperature bath or semiconductor manufacturing device, it is used for internal air circulation to uniform the internal temperature.
* Options: Finger Guard (model: IG-120)
-
Product
Excellent thermal conductivity cooling fan motor HS4506 Series (Squid End!)
-
Handling Company
Hirosawa Seiki Works
-
Categories
6 Models of Excellent thermal conductivity cooling fan motor HS4506 Series (Squid End!)
Items marked with have different values depending on the model number.
Click on the part number for more information about each product
| Product Image | Part Number | Price (excluding tax) | Earth specification model specified earth screw mounting | Earth specification standard specification S-JET 100V class | Earth specification standard specification S-JET 200V class | Earth specification standard specification TUV | Earth specification standard specification UL/C-UL100V class | Earth specification standard specification UL/C-UL200V class | Earth specification standard specification general 100V class | Earth specification standard specification general 200V class | Earth specification standard specification oil mist type oil | Frequency Hz | IP code (Details.gs03) | Input w | Insulated pressure | Insulating class | Insulation resistance | Lead wire specification | Mass kg | Material | Maximum air volume m^3/min | Maximum static pressure PA | Motor format | Noise DB (a) | Noise measurement | Preserved environment | Protection system | Rotation number min^-1 | Voltage VAC | Voltage range | Wind volume ~ Static pressure characteristics | With earth specification type specified ground wire | bearing | type | usage environment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
UHS4506W (UL / C-UL) (TUV) |
Available upon quote | Artap processing, earth screw mounting | No to process | Artap processing, earth screw attached | Artap processing, earth screw attached | No to process | Artap processing, earth screw attached | No to process | Artap processing, earth screw attached | Artap processing, earth screw attached | 50, 60 | - | 20, 18 | AC1,500V/1 minute or AC1,800V/1 second (leakage current 0.5mA or less, normal temperature/humidity, 50Hz) | A type A 105 ° C (UL/C-UL), E type 120 ° C (EN/General) | 100mΩ or more with DC500V mega (room temperature, normal humidity) | Ulavlv2 AWG22, 100V class: Black, 200V class: White or ash | 0.6 | Standard: Aluminum Die Cast Black Painting (Frame), metal black paint (feather), Special: Aluminum Die Cast Unpainted (frame), metal black paint (feather) | 2.40, 2.70 | 73.50, 83.30 | Single -phase Kumatori -inducing electric motor | 42, 46 | 1.5m position from the equipment surface (on the inhalation port center line) | -30 ~+80 ° C/RH20 ~ 85% (without condensation) | Impedance protection | 2,650, 3,100 | 100 | Voltage fluctuation: Rated voltage within ± 10%, continuous operation: rated voltage or less | Measurement with a double chamber measurement device (AMCA210-85) | No applicable product | 2 ball bearing | Triparis | -10 ~+60 ° C/RH35 ~ 85% (no condensation) |
|
|
UHS4506BW (UL / C-UL) (TUV) |
Available upon quote | Artap processing, earth screw mounting | No to process | Artap processing, earth screw attached | Artap processing, earth screw attached | No to process | Artap processing, earth screw attached | No to process | Artap processing, earth screw attached | Artap processing, earth screw attached | 50, 60 | - | 20, 18 | AC1,500V/1 minute or AC1,800V/1 second (leakage current 0.5mA or less, normal temperature/humidity, 50Hz) | A type A 105 ° C (UL/C-UL), E type 120 ° C (EN/General) | 100mΩ or more with DC500V mega (room temperature, normal humidity) | Ulavlv2 AWG22, 100V class: Black, 200V class: White or ash | 0.6 | Standard: Aluminum Die Cast Black Painting (Frame), metal black paint (feather), Special: Aluminum Die Cast Unpainted (frame), metal black paint (feather) | 2.40, 2.70 | 73.50, 83.30 | Single -phase Kumatori -inducing electric motor | 42, 46 | 1.5m position from the equipment surface (on the inhalation port center line) | -30 ~+80 ° C/RH20 ~ 85% (without condensation) | Impedance protection | 2,650, 3,100 | 115 | Voltage fluctuation: Rated voltage within ± 10%, continuous operation: rated voltage or less | Measurement with a double chamber measurement device (AMCA210-85) | No applicable product | 2 ball bearing | Triparis | -10 ~+60 ° C/RH35 ~ 85% (no condensation) |
|
|
UHS4506NW (UL / C-UL) (TUV) |
Available upon quote | Artap processing, earth screw mounting | No to process | Artap processing, earth screw attached | Artap processing, earth screw attached | No to process | Artap processing, earth screw attached | No to process | Artap processing, earth screw attached | Artap processing, earth screw attached | 50, 60 | - | 20, 18 | AC1,500V/1 minute or AC1,800V/1 second (leakage current 0.5mA or less, normal temperature/humidity, 50Hz) | A type A 105 ° C (UL/C-UL), E type 120 ° C (EN/General) | 100mΩ or more with DC500V mega (room temperature, normal humidity) | Ulavlv2 AWG22, 100V class: Black, 200V class: White or ash | 0.6 | Standard: Aluminum Die Cast Black Painting (Frame), metal black paint (feather), Special: Aluminum Die Cast Unpainted (frame), metal black paint (feather) | 2.40, 2.70 | 73.50, 83.30 | Single -phase Kumatori -inducing electric motor | 42, 46 | 1.5m position from the equipment surface (on the inhalation port center line) | -30 ~+80 ° C/RH20 ~ 85% (without condensation) | Impedance protection | 2,650, 3,100 | 120 | Voltage fluctuation: Rated voltage within ± 10%, continuous operation: rated voltage or less | Measurement with a double chamber measurement device (AMCA210-85) | No applicable product | 2 ball bearing | Triparis | -10 ~+60 ° C/RH35 ~ 85% (no condensation) |
|
|
UHS4556W (UL / C-UL) (TUV) |
Available upon quote | Artap processing, earth screw mounting | No to process | Artap processing, earth screw attached | Artap processing, earth screw attached | No to process | Artap processing, earth screw attached | No to process | Artap processing, earth screw attached | Artap processing, earth screw attached | 50, 60 | - | 20, 18 | AC1,500V/1 minute or AC1,800V/1 second (leakage current 0.5mA or less, normal temperature/humidity, 50Hz) | A type A 105 ° C (UL/C-UL), E type 120 ° C (EN/General) | 100mΩ or more with DC500V mega (room temperature, normal humidity) | Ulavlv2 AWG22, 100V class: Black, 200V class: White or ash | 0.6 | Standard: Aluminum Die Cast Black Painting (Frame), metal black paint (feather), Special: Aluminum Die Cast Unpainted (frame), metal black paint (feather) | 2.40, 2.70 | 73.50, 83.30 | Single -phase Kumatori -inducing electric motor | 42, 46 | 1.5m position from the equipment surface (on the inhalation port center line) | -30 ~+80 ° C/RH20 ~ 85% (without condensation) | Impedance protection | 2,650, 3,100 | 200 | Voltage fluctuation: Rated voltage within ± 10%, continuous operation: rated voltage or less | Measurement with a double chamber measurement device (AMCA210-85) | No applicable product | 2 ball bearing | Triparis | -10 ~+60 ° C/RH35 ~ 85% (no condensation) |
|
|
UHS4556MW (UL / C-UL) (TUV) |
Available upon quote | Artap processing, earth screw mounting | No to process | Artap processing, earth screw attached | Artap processing, earth screw attached | No to process | Artap processing, earth screw attached | No to process | Artap processing, earth screw attached | Artap processing, earth screw attached | 50, 60 | - | 20, 18 | AC1,500V/1 minute or AC1,800V/1 second (leakage current 0.5mA or less, normal temperature/humidity, 50Hz) | A type A 105 ° C (UL/C-UL), E type 120 ° C (EN/General) | 100mΩ or more with DC500V mega (room temperature, normal humidity) | Ulavlv2 AWG22, 100V class: Black, 200V class: White or ash | 0.6 | Standard: Aluminum Die Cast Black Painting (Frame), metal black paint (feather), Special: Aluminum Die Cast Unpainted (frame), metal black paint (feather) | 2.40, 2.70 | 73.50, 83.30 | Single -phase Kumatori -inducing electric motor | 42, 46 | 1.5m position from the equipment surface (on the inhalation port center line) | -30 ~+80 ° C/RH20 ~ 85% (without condensation) | Impedance protection | 2,650, 3,100 | 220 | Voltage fluctuation: Rated voltage within ± 10%, continuous operation: rated voltage or less | Measurement with a double chamber measurement device (AMCA210-85) | No applicable product | 2 ball bearing | Triparis | -10 ~+60 ° C/RH35 ~ 85% (no condensation) |
|
|
UHS4556KW (UL / C-UL) (TUV) |
Available upon quote | Artap processing, earth screw mounting | No to process | Artap processing, earth screw attached | Artap processing, earth screw attached | No to process | Artap processing, earth screw attached | No to process | Artap processing, earth screw attached | Artap processing, earth screw attached | 50, 60 | - | 20, 18 | AC1,500V/1 minute or AC1,800V/1 second (leakage current 0.5mA or less, normal temperature/humidity, 50Hz) | A type A 105 ° C (UL/C-UL), E type 120 ° C (EN/General) | 100mΩ or more with DC500V mega (room temperature, normal humidity) | Ulavlv2 AWG22, 100V class: Black, 200V class: White or ash | 0.6 | Standard: Aluminum Die Cast Black Painting (Frame), metal black paint (feather), Special: Aluminum Die Cast Unpainted (frame), metal black paint (feather) | 2.40, 2.70 | 73.50, 83.30 | Single -phase Kumatori -inducing electric motor | 42, 46 | 1.5m position from the equipment surface (on the inhalation port center line) | -30 ~+80 ° C/RH20 ~ 85% (without condensation) | Impedance protection | 2,650, 3,100 | 230 | Voltage fluctuation: Rated voltage within ± 10%, continuous operation: rated voltage or less | Measurement with a double chamber measurement device (AMCA210-85) | No applicable product | 2 ball bearing | Triparis | -10 ~+60 ° C/RH35 ~ 85% (no condensation) |
Click on the part number for more information about each product
Customers who viewed this product also viewed
Other products of Hirosawa Seiki Works
View more products of Hirosawa Seiki Works
