All Categories

History

  1. Metoree
  2. Adhesives & Repair Materials
  3. Glue
  4. Characterized by fast curing time. Basic kit for "Tokonari Quick" Fast-curing Tokonari Quick Basic Kit (2-component low viscosity adhesive) (Candil Design Co., Ltd.)
Characterized by fast curing time. Basic kit for "Tokonari Quick" Fast-curing Tokonari Quick Basic Kit (2-component low viscosity adhesive)-Fast curing floor noise quick basic kit (2-component low viscosity adhesive)
Characterized by fast curing time. Basic kit for "Tokonari Quick" Fast-curing Tokonari Quick Basic Kit (2-component low viscosity adhesive)-Candil Design Co., Ltd.

Characterized by fast curing time. Basic kit for "Tokonari Quick" Fast-curing Tokonari Quick Basic Kit (2-component low viscosity adhesive)
Candil Design Co., Ltd.

Candil Design Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

63.1hours

About This Product

■Characteristic is its quick curing time. Basic kit for “Tokonari Quick”

Hardens quickly. There is little odor. The injection hole is small. A two-component adhesive for correcting floor noise with all three features. This basic kit will get you started right away. This is a cheaper price than purchasing each item individually. *Special instruction manual included This product, ``Soku-Haru Tokonari Quick,'' is characterized by its quick curing time and is suitable for floor rumbling sites in about 5 to 6 locations. (If you leave it for a few minutes, it will harden inside the mixer or needle.) It is also a low viscosity type, making it suitable for injection into narrow or deep gaps. In cases where there are more locations than this, or where floor noise due to floating floors (relatively wide gaps) is the cause, please use the "Gishigishi Stopper Mini", which is a foam type and has a setting time that can be adjusted using a curing accelerator. Please use it.

■About low viscosity two-component adhesive

・Set time: Approximately 3 minutes (Set time is the time it takes for the injected two-component adhesive to harden and exhibit initial adhesive strength.) ・Curing time: Approximately 15 minutes (Please use this as a guide as it may vary depending on the environment.) ・Expiry date: 1 year

■Notes

・In the case of underfloor heating, there is a risk of damaging the underfloor heating system when drilling holes etc. In that case, please note that we cannot accept any responsibility. ・Please provide sufficient ventilation during work. ・When using this product, knowledge of repair techniques and flooring methods is required. - Many floor noises have unknown causes, and the use of this product does not completely prevent all floor noises. note that. ・Avoid direct sunlight, hot and humid places, and store out of reach of children. ・If stored for a long time in a high temperature environment (such as in a car), there is a risk of leakage, gelling, or hardening. ・Since the two-component adhesive reacts quickly, the needle and mixer may become clogged if left unused. Also, please be careful as there is a high possibility that the joint between the needle and mixer will come off. - There is a difference in the size of the extrusion part of the gun, but this is not a problem in terms of specifications.

  • Product

    Characterized by fast curing time. Basic kit for "Tokonari Quick" Fast-curing Tokonari Quick Basic Kit (2-component low viscosity adhesive)

Share this product


90+ people viewing

Last viewed: 22 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Characterized by fast curing time. Basic kit for "Tokonari Quick" Fast-curing Tokonari Quick Basic Kit (2-component low viscosity adhesive)

Image Part Number Price (excluding tax) Material Size
Characterized by fast curing time. Basic kit for "Tokonari Quick" Fast-curing Tokonari Quick Basic Kit (2-component low viscosity adhesive)-Part Number-Fast curing floor noise quick basic kit (2-component low viscosity adhesive)

Fast curing floor noise quick basic kit (2-component low viscosity adhesive)

$ 120.12〜

Main component: acrylic adhesive

Kit contents Tokonari Quick low viscosity 2-component adhesive (50ml) × 5 pieces Tokonari Quick hand gun × 1 piece Tokonari Quick needle mixer adhesive type 13mm × 10 pieces, etc.

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Nano Ace D-600-Nippon Talc Co., Ltd.

Nano Ace D-600

Nippon Talc Co., Ltd.

4.5

300+ people viewing

Last viewed: 3 hours ago

Response time: 67.11 hours

Glue

3 models listed

Ultrafine talc powder SG-2000-Nippon Talc Co., Ltd.

Ultrafine talc powder SG-2000

Nippon Talc Co., Ltd.

4.5

270+ people viewing

Last viewed: 3 hours ago

Response time: 67.11 hours

Glue

3 models listed

High quality anaerobic adhesives and sealants WEICONLOCK-Taiyo Mold Supplies Co., Ltd.

High quality anaerobic adhesives and sealants WEICONLOCK

Taiyo Mold Supplies Co., Ltd.

4.8

410+ people viewing

Last viewed: 3 hours ago

Response time: 45.21 hours

Glue

6 models listed

Primer-free MMA (acrylic) structural adhesive Crestabond® series Crestabond®-Scott Bader Japan Co., Ltd.

Primer-free MMA (acrylic) structural adhesive Crestabond® series Crestabond®

Scott Bader Japan Co., Ltd.

1070+ people viewing

Glue

20 models listed

Seal-glo® Epoxy thermosetting adhesive Adhesive for fixing chip components-FUJI CHEMICAL INDUSTRIAL CO., LTD.

Seal-glo® Epoxy thermosetting adhesive Adhesive for fixing chip components

FUJI CHEMICAL INDUSTRIAL CO., LTD.

180+ people viewing

Response time: 77.62 hours

Glue
Reactive precoating adhesive (anaerobic)-Fastener Industry Co., Ltd.

Reactive precoating adhesive (anaerobic)

Fastener Industry Co., Ltd.

90+ people viewing

Response time: 25.13 hours

Glue

3 models listed

Hot melt adhesive for veneer core Unimelt-Unique Co., Ltd.

Hot melt adhesive for veneer core Unimelt

Unique Co., Ltd.

140+ people viewing

Last viewed: 12 hours ago

Glue

3 models listed

Heat-resistant inorganic adhesive Nissera Coat-Japan Special Ceramic Co., Ltd.

Heat-resistant inorganic adhesive Nissera Coat

Japan Special Ceramic Co., Ltd.

140+ people viewing

Glue

2 models listed

Water-based/water-soluble adhesive REGITEX series-Regitex Co., Ltd.

Water-based/water-soluble adhesive REGITEX series

Regitex Co., Ltd.

170+ people viewing

Glue

2 models listed

STP (modified silicone) elastic adhesive Kleiberit 605.1.20-Kleiberit Japan Co., Ltd.

STP (modified silicone) elastic adhesive Kleiberit 605.1.20

Kleiberit Japan Co., Ltd.

120+ people viewing

Glue

3 models listed

1-component urethane adhesive Kleiberit 501 series-Kleiberit Japan Co., Ltd.

1-component urethane adhesive Kleiberit 501 series

Kleiberit Japan Co., Ltd.

180+ people viewing

Last viewed: 10 hours ago

Glue

3 models listed

Seal-glo® Epoxy Thermosetting Adhesive Self-Aligning Adhesive NE9000H-FUJI CHEMICAL INDUSTRIAL CO., LTD.

Seal-glo® Epoxy Thermosetting Adhesive Self-Aligning Adhesive NE9000H

FUJI CHEMICAL INDUSTRIAL CO., LTD.

160+ people viewing

Last viewed: 16 hours ago

Response time: 77.62 hours

Glue
See More Glue Products

Other products of Candil Design Co., Ltd.

Reviews shown here are reviews of companies.

Speedy repair of cracks, cracks, and chips Speed ​​UV light gel (all 5 types)-Candil Design Co., Ltd.

Speedy repair of cracks, cracks, and chips Speed ​​UV light gel (all 5 types)

Candil Design Co., Ltd.

$21.13

140+ people viewing

Response time: 63.09 hours

Crack Sealer

3 models listed

Speedy repair of cracks, cracks, and chips Speed ​​UV light gel (single item)-Candil Design Co., Ltd.

Speedy repair of cracks, cracks, and chips Speed ​​UV light gel (single item)

Candil Design Co., Ltd.

$11.57

140+ people viewing

Last viewed: 23 hours ago

Response time: 63.09 hours

Crack Sealer

3 models listed

Repair filler No.1 standard hard wax [Color No.: 50001-100601]-Candil Design Co., Ltd.

Repair filler No.1 standard hard wax [Color No.: 50001-100601]

Candil Design Co., Ltd.

$2.60

130+ people viewing

Last viewed: 4 hours ago

Response time: 63.09 hours

Caulking
Repair filler No. 1 standard hard wax [Color No.: 49001-49801]-Candil Design Co., Ltd.

Repair filler No. 1 standard hard wax [Color No.: 49001-49801]

Candil Design Co., Ltd.

$2.60

110+ people viewing

Last viewed: 6 hours ago

Response time: 63.09 hours

Caulking
Repair filler No. 1 standard hard wax [Color No.: 48201-48901]-Candil Design Co., Ltd.

Repair filler No. 1 standard hard wax [Color No.: 48201-48901]

Candil Design Co., Ltd.

$2.60

110+ people viewing

Response time: 63.09 hours

Caulking
Repair filler No. 1 standard hard wax [Color No.: 46801-47901]-Candil Design Co., Ltd.

Repair filler No. 1 standard hard wax [Color No.: 46801-47901]

Candil Design Co., Ltd.

$2.60

130+ people viewing

Last viewed: 3 hours ago

Response time: 63.09 hours

Caulking
Repair filler No. 1 standard hard wax [Color No.: 9001-9016]-Candil Design Co., Ltd.

Repair filler No. 1 standard hard wax [Color No.: 9001-9016]

Candil Design Co., Ltd.

$2.60

110+ people viewing

Response time: 63.09 hours

Caulking
Repair filler No.1 standard hard wax [Color No.: 1013-7040]-Candil Design Co., Ltd.

Repair filler No.1 standard hard wax [Color No.: 1013-7040]

Candil Design Co., Ltd.

$2.60

130+ people viewing

Last viewed: 7 hours ago

Response time: 63.09 hours

Caulking
Repair filler No. 1 standard hard wax [Color No.: 900-919]-Candil Design Co., Ltd.

Repair filler No. 1 standard hard wax [Color No.: 900-919]

Candil Design Co., Ltd.

$2.60

110+ people viewing

Response time: 63.09 hours

Caulking
Repair filler No.1 standard hard wax [Color No.: 302-356]-Candil Design Co., Ltd.

Repair filler No.1 standard hard wax [Color No.: 302-356]

Candil Design Co., Ltd.

$2.60

100+ people viewing

Last viewed: 15 hours ago

Response time: 63.09 hours

Caulking
Arteco Spray Primer Curing Accelerator Spray-Candil Design Co., Ltd.

Arteco Spray Primer Curing Accelerator Spray

Candil Design Co., Ltd.

$7.54

100+ people viewing

Response time: 63.09 hours

Cure Accelerators
Tip nozzle exclusively for BR-100 Nozzle 10 pieces Exclusively for BR-100 Super-Candil Design Co., Ltd.

Tip nozzle exclusively for BR-100 Nozzle 10 pieces Exclusively for BR-100 Super

Candil Design Co., Ltd.

$1.82

70+ people viewing

Response time: 63.09 hours


View more products of Candil Design Co., Ltd.

About Company Handling This Product

Candil Design Co., Ltd.

Response Rate

100.0%

Response Time

63.1hrs

  • Japan

Related search keywords

Glue
Glue　Candil Design Co., Ltd.
Candil Design Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree