“Tokonari Quick” adhesive features a fast curing time Tokonari Quick low viscosity 2-component adhesive
Candil Design Co., Ltd.
About This Product
■Characteristic is its quick curing time. Adhesive for “Tokonari Quick”
Hardens quickly. There is little odor. The injection hole is small. A 2-component adhesive for correcting floor noise with all three features. *Includes dedicated instruction manual
This product, ``Soku-Haru Tokonari Quick,'' is characterized by its quick curing time and is suitable for floor rumbling sites in about 5 to 6 locations. (If you leave it for a few minutes, it will harden inside the mixer or needle.) It is also a low viscosity type, making it suitable for injection into narrow or deep gaps. In cases where there are more locations than this, or where floor noise due to floating floors (relatively wide gaps) is the cause, please use the "Gishigishi Stopper Mini", which is a foam type and has a setting time that can be adjusted using a curing accelerator. Please use it.
■About low viscosity two-component adhesive
・Set time: Approximately 3 minutes (Set time is the time it takes for the injected two-component adhesive to harden and exhibit initial adhesive strength.)
・Curing time: Approximately 15 minutes (Please use this as a guide as it may vary depending on the environment.)
■Notes
・In the case of underfloor heating, there is a risk of damaging the underfloor heating system when drilling holes etc. Please note that in this case, we cannot accept any responsibility.
・Please provide sufficient ventilation during work.
・When using this product, knowledge of repair techniques and flooring methods is required.
- Many floor noises have unknown causes, and the use of this product does not completely prevent all floor noises. note that.
・Avoid direct sunlight, hot and humid places, and store out of reach of children.
・If stored for a long time in a high temperature environment (such as in a car), there is a risk of leakage, gelling, or hardening.
・Since the two-component adhesive reacts quickly, there is a risk that the needle or mixer may become clogged if left unused. Also, please be careful as there is a high possibility that the joint between the needle and mixer will come off.
・There is a difference in the size of the extrusion part of the gun, but this is not a problem in terms of specifications.
-
Product
“Tokonari Quick” adhesive features a fast curing time Tokonari Quick low viscosity 2-component adhesive
-
Handling Company
Candil Design Co., Ltd.
-
Categories
1 Models of “Tokonari Quick” adhesive features a fast curing time Tokonari Quick low viscosity 2-component adhesive
| Product Image | Part Number | Price (excluding tax) | Material | Precautions | Size |
|---|---|---|---|---|---|
|
|
Floor sound quick low viscosity 2-component adhesive |
$ 11.31〜 | Ingredients: Acrylic adhesive | *If stored for a long time in a high-temperature environment such as in a car, there is a risk of leakage, gelation, and hardening. | Contents: 50ml |
Customers who viewed this product also viewed
Other products of Candil Design Co., Ltd.
![Repair filler No.1 standard hard wax [Color No.: 50001-100601]-Candil Design Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006778202410163.png)
![Repair filler No. 1 standard hard wax [Color No.: 49001-49801]-Candil Design Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006778202410164.png)
![Repair filler No. 1 standard hard wax [Color No.: 48201-48901]-Candil Design Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006778202410165.png)
![Repair filler No. 1 standard hard wax [Color No.: 46801-47901]-Candil Design Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006778202410166.png)
![Repair filler No. 1 standard hard wax [Color No.: 9001-9016]-Candil Design Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006778202410167.png)
![Repair filler No.1 standard hard wax [Color No.: 1013-7040]-Candil Design Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006778202410168.png)
![Repair filler No. 1 standard hard wax [Color No.: 900-919]-Candil Design Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006778202410169.png)
![Repair filler No.1 standard hard wax [Color No.: 302-356]-Candil Design Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/30067782024101610.png)
View more products of Candil Design Co., Ltd.
About Company Handling This Product
- Japan