All Categories

History

QDC die set "QDC system" Q-ACE-Q-ACE
QDC die set "QDC system" Q-ACE-Press Technology Research Institute Co., Ltd.

About This Product

■Summary

We process it to match the customer's press machine. QDC=Quick Die Change, a die set for changing molds in a short time. It is recommended to use QDC while attached to a press machine, so the size of the mold needs to be standardized to some extent. QDC is a single-shot type, and there are sizes from No. 1 to No. 4. If you want to press multiple processes continuously using the same press machine, we also offer QDC's multi-process type = Q-ACE. Consider conventional molds by dividing them into the "die set part" and the actual "mold part." The "die set part" remains attached to the press. The "mold part" is attached to the base plate with a reference hole. The "die set part" has a high-precision pin that corresponds to the base plate, and this pin enters the reference hole of the base plate and is the key to matching the upper and lower dies and the accuracy of the front and rear stages. Not only single-shot and transfer types, but also progressive types are separated and attached to the base plate, making them smaller and lighter and easier to handle. Conventional molds require a large die set with multiple stages, and only the mold part has to be manufactured, stored, moved, and maintained, making it cheaper, faster, and easier. Since replacing the mold involves replacing the "mold part" attached to the base plate, no experienced personnel is required, and even part-time workers and female employees can perform single setups. For clearance and correspondence of the "mold part", use a mold matching jig presetter.

■The cost of press processing is determined by the mold cost.

Q-ACE solves the problem of reducing mold costs

■Notes

Q-308 A die set with multiple sizes and stages from No.1 to No.4. We have a track record of making products with an outer diameter of up to 2,000 mm, and we have a track record of making about 13 stages for No. 2 size. Of course, it will be installed in a press machine of about 600 to 1,000 tons. In addition, to move the workpiece within the press, it must be combined with a separate transfer or β robot.

  • Product

    QDC die set "QDC system" Q-ACE

Share this product


60+ people viewing

Last viewed: 16 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of QDC die set "QDC system" Q-ACE

Image Part Number Price (excluding tax) Ability Hydraulic source Hydraulic pressure used Die height used Base plate dimensions Punch holder installation Die holder installation Die height Slide adjustment amount Stroke length Number of strokes Clamp punch Clamp die Clamp Option
QDC die set "QDC system" Q-ACE-Part Number-Q-ACE

Q-ACE

Available upon quote

1,500kN 150TON

Air driven hydraulic unit

16.7MPa
170kgf/cm2

348mm

250mmx210mmx22mm
(No.3 standard size)

T-nut bolt tightening x4 (M20)
Bolt tightening x2 (M20)

Bolt tightening x6 (M20)

380mm

100mm

150mm

14~25SPM

19.6kN
2.0TON

19.6kN
2.0TON

Clamp is hydraulic only

With locate pin confirmation photoelectric switch

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Die Sets Products

Other products of Press Technology Research Institute Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Press Technology Research Institute Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree