All Categories

History

  1. Metoree
  2. Fixtures
  3. Die Sets
  4. QDC die set "QDC system" Q-308 No.1 (Press Technology Research Institute Co., Ltd.)
QDC die set "QDC system" Q-308 No.1-Q-308 No.1
QDC die set "QDC system" Q-308 No.1-Press Technology Research Institute Co., Ltd.

QDC die set "QDC system" Q-308 No.1
Press Technology Research Institute Co., Ltd.

About This Product

■Summary

We process it to match the customer's press machine. QDC=Quick Die Change, a die set for changing molds in a short time. It is recommended to use QDC while attached to a press machine, so the size of the mold needs to be standardized to some extent. QDC is a single-shot type, and there are sizes from No. 1 to No. 4. If you want to press multiple processes continuously using the same press machine, we also offer QDC's multi-process type = Q-ACE. Consider conventional molds by dividing them into the "die set part" and the actual "mold part." The "die set part" remains attached to the press. The "mold part" is attached to the base plate with a reference hole. The "die set part" has a high-precision pin that corresponds to the base plate, and this pin enters the reference hole of the base plate and is the key to matching the upper and lower dies and the accuracy of the front and rear stages. Not only single-shot and transfer types, but also progressive types are separated and attached to the base plate, making them smaller and lighter and easier to handle. Conventional molds require a large die set with multiple stages, and only the mold part has to be manufactured, stored, moved, and maintained, making it cheaper, faster, and easier. Since replacing the mold involves replacing the "mold part" attached to the base plate, no experienced personnel is required, and even part-time workers and female employees can perform single setups. For clearance and correspondence of the "mold part", use a mold matching jig presetter.

■Q-308 system.

・For high-variety, low-volume production ・To make molds quickly and cheaply ・To reduce product inventory to zero

  • Product

    QDC die set "QDC system" Q-308 No.1

Share this product


60+ people viewing

Last viewed: 9 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of QDC die set "QDC system" Q-308 No.1

Image Part Number Price (excluding tax) Hydraulic source Kiribanben Remarks Hydraulic pressure used Punch holder installation Die holder installation Clamp panties Clamp die Clamp
QDC die set "QDC system" Q-308 No.1-Part Number-Q-308 No.1

Q-308 No.1

Available upon quote

PG booster

Manual operation for both up and down simultaneously

Maximum mold and mold mounting base up to 100 x 100 mm

7.6MPa
80kgf/cm2

T-nut bolting

T-nut bolting

9.8KN
1.0TON

9.8KN
1.0TON

Manual or hydraulic type available.

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Smart die set-Yamanaka Eng Co.,Ltd.

Smart die set

Yamanaka Eng Co.,Ltd.

30+ people viewing

Die Sets
Standard press machine servo die set SSD series-Sekiguchi Manufacturing Co., Ltd.

Standard press machine servo die set SSD series

Sekiguchi Manufacturing Co., Ltd.

90+ people viewing

Last viewed: 10 hours ago

Response time: 15.62 hours

Die Sets

2 models listed

Spring type closure die set-Yamanaka Eng Co.,Ltd.

Spring type closure die set

Yamanaka Eng Co.,Ltd.

30+ people viewing

Last viewed: 18 hours ago

Die Sets
Standard press machine servo die set SSD series SSD1000-C (10ton)-Sekiguchi Manufacturing Co., Ltd.

Standard press machine servo die set SSD series SSD1000-C (10ton)

Sekiguchi Manufacturing Co., Ltd.

100+ people viewing

Last viewed: 8 hours ago

Response time: 15.62 hours

Die Sets

2 models listed

Hydraulic closure die set-Yamanaka Eng Co.,Ltd.

Hydraulic closure die set

Yamanaka Eng Co.,Ltd.

40+ people viewing

Last viewed: 14 hours ago

Die Sets
Standard press machine servo die set SSD series SSD1500-C (15ton)-Sekiguchi Manufacturing Co., Ltd.

Standard press machine servo die set SSD series SSD1500-C (15ton)

Sekiguchi Manufacturing Co., Ltd.

80+ people viewing

Last viewed: 9 hours ago

Response time: 15.62 hours

Die Sets

2 models listed

Servo die set with pickup transfer device SSD500-SC-P-Sekiguchi Manufacturing Co., Ltd.

Servo die set with pickup transfer device SSD500-SC-P

Sekiguchi Manufacturing Co., Ltd.

70+ people viewing

Response time: 15.62 hours

Die Sets
Die system for press brake EZ MOVABLE DIE-Tiuia Society Co., Ltd.

Die system for press brake EZ MOVABLE DIE

Tiuia Society Co., Ltd.

5.0

290+ people viewing

Response time: 63.35 hours

Die Sets

3 models listed

Press mold parts Guide post for movable plate-CHAMPION CORPORATION Co., Ltd.

Press mold parts Guide post for movable plate

CHAMPION CORPORATION Co., Ltd.

40+ people viewing

Last viewed: 19 hours ago

Response time: 0.35 hours

Die Sets
Press mold parts high precision guide post-CHAMPION CORPORATION Co., Ltd.

Press mold parts high precision guide post

CHAMPION CORPORATION Co., Ltd.

40+ people viewing

Last viewed: 15 hours ago

Response time: 0.35 hours

Die Sets
QDC die set "QDC system" Q-308 No.2-Press Technology Research Institute Co., Ltd.

QDC die set "QDC system" Q-308 No.2

Press Technology Research Institute Co., Ltd.

60+ people viewing

Last viewed: 31 seconds ago

Die Sets
QDC die set "QDC system" Q-308 No.3-Press Technology Research Institute Co., Ltd.

QDC die set "QDC system" Q-308 No.3

Press Technology Research Institute Co., Ltd.

40+ people viewing

Last viewed: 37 seconds ago

Die Sets
See More Die Sets Products

Other products of Press Technology Research Institute Co., Ltd.

Reviews shown here are reviews of companies.

Leveler "Fine Leveler (model number 6 types)" FL-50-Press Technology Research Institute Co., Ltd.

Leveler "Fine Leveler (model number 6 types)" FL-50

Press Technology Research Institute Co., Ltd.

40+ people viewing

Leveler "Fine Leveler (6 types)" FL-100-Press Technology Research Institute Co., Ltd.

Leveler "Fine Leveler (6 types)" FL-100

Press Technology Research Institute Co., Ltd.

40+ people viewing

Last viewed: 3 minutes ago

Leveler "Fine Leveler (6 types)" FL-150-Press Technology Research Institute Co., Ltd.

Leveler "Fine Leveler (6 types)" FL-150

Press Technology Research Institute Co., Ltd.

50+ people viewing

Last viewed: 10 minutes ago

Leveler "Fine Leveler (model number 6 types)" FL-2100-Press Technology Research Institute Co., Ltd.

Leveler "Fine Leveler (model number 6 types)" FL-2100

Press Technology Research Institute Co., Ltd.

40+ people viewing

Last viewed: 4 hours ago

Leveler "Fine Leveler (6 types)" FLV3 series FLV3-150-Press Technology Research Institute Co., Ltd.

Leveler "Fine Leveler (6 types)" FLV3 series FLV3-150

Press Technology Research Institute Co., Ltd.

50+ people viewing

Last viewed: 8 minutes ago

Leveler "Fine Leveler (6 types)" FLV3 series FLV3-200-Press Technology Research Institute Co., Ltd.

Leveler "Fine Leveler (6 types)" FLV3 series FLV3-200

Press Technology Research Institute Co., Ltd.

50+ people viewing

Material feeding device "Rotarian Escargot" Horizontal uncoiler Rotarian S-600-Press Technology Research Institute Co., Ltd.

Material feeding device "Rotarian Escargot" Horizontal uncoiler Rotarian S-600

Press Technology Research Institute Co., Ltd.

40+ people viewing

Last viewed: 5 minutes ago

Material feeding device "Rotarian Escargot" Inverter type variable speed horizontal loading uncoiler Rotarian S-900-Press Technology Research Institute Co., Ltd.

Material feeding device "Rotarian Escargot" Inverter type variable speed horizontal loading uncoiler Rotarian S-900

Press Technology Research Institute Co., Ltd.

40+ people viewing

Material feeding device "Rotarian Escargot" Rotarian R-900-Press Technology Research Institute Co., Ltd.

Material feeding device "Rotarian Escargot" Rotarian R-900

Press Technology Research Institute Co., Ltd.

20+ people viewing

Material feeding device "Rotarian Escargot" Double uncoiler/leveler Escargot QUL-1020-Press Technology Research Institute Co., Ltd.

Material feeding device "Rotarian Escargot" Double uncoiler/leveler Escargot QUL-1020

Press Technology Research Institute Co., Ltd.

20+ people viewing

Last viewed: 16 hours ago

Material feeding device "Rotarian Escargot" Single uncoiler-Press Technology Research Institute Co., Ltd.

Material feeding device "Rotarian Escargot" Single uncoiler

Press Technology Research Institute Co., Ltd.

40+ people viewing

Last viewed: 12 minutes ago

QDC die set "QDC system" Q-308 No.2-Press Technology Research Institute Co., Ltd.

QDC die set "QDC system" Q-308 No.2

Press Technology Research Institute Co., Ltd.

60+ people viewing

Last viewed: 31 seconds ago

Die Sets

View more products of Press Technology Research Institute Co., Ltd.

About Company Handling This Product

Press Technology Research Institute Co., Ltd.

  • Japan

Related search keywords

Die Sets
Die Sets　Press Technology Research Institute Co., Ltd.
Press Technology Research Institute Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree