All Categories

History

FFC cable LSG bank card (FFC with grounding) ASFBNCD-SB (shield reinforced type)-ASFBNCD-SB (Shield reinforced type)
FFC cable LSG bank card (FFC with grounding) ASFBNCD-SB (shield reinforced type)-Bando Electric Cable Co., Ltd.

FFC cable LSG bank card (FFC with grounding) ASFBNCD-SB (shield reinforced type)
Bando Electric Cable Co., Ltd.

Bando Electric Cable Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

50.8hours


About This Product

■Characteristics/Applications

・It is possible to connect the shield and conductor terminal directly. (Ground connection can be made to the shield without changing the connector) ・For in-machine wiring of products that require noise countermeasures such as wiring for a wide range of electronic equipment, from industrial equipment, vehicles, and communications to the consumer market of PCs.

■Conductor resistance P=0.5mm (0.035×0.32mm)

2,000Ω/km or less

■Heat cycle (1 cycle/12h20→40→25→85→25℃ 5Cycles

No insulation resistance or withstand voltage abnormalities

■Precautions when handling the product

- Wear vinyl gloves when handling FFC and avoid touching it with bare hands. (Sweat, saliva, sebum, etc. may affect the quality.) - Avoid applying excessive external force such as prying or turning when inserting or removing the connector. ・Be sure to grasp the reinforcing plate of the bank card with your fingers and insert/remove it in as straight a direction as possible. - Please design the area around the reinforcing plate so that extreme loads are not applied as much as possible. Never bend on the reinforcing plate. ・Avoid unreasonable contact with other objects. Avoid condensation. ・For continuous use in high temperature and high humidity environments, please conduct a mounting evaluation at the time of adoption. - If you accidentally drop the bank card on the floor when inserting the connector, thoroughly clean the exposed conductor before inserting it. - Avoid using solvents as it may affect the product (load on the FFC itself and secondary processing). ・For products with ground processing, please ensure that no load is applied to the following areas. ・When assembling the casing or using jigs, please consult with our sales representative.

■Storage precautions

・Do not place it in a place exposed to direct sunlight. ・Do not place it in a dusty place. ・Do not place near corrosive gases or organic solvents. - Store indoors at a temperature of 40℃ or less, relative humidity of 80%RH or less, and no condensation. ・The desiccant material included in our shipment has the property of hardening when it absorbs moisture. Please note that the moisture absorption ability will decrease when it is solidified.

  • Product

    FFC cable LSG bank card (FFC with grounding) ASFBNCD-SB (shield reinforced type)

Share this product


60+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of FFC cable LSG bank card (FFC with grounding) ASFBNCD-SB (shield reinforced type)

Image Part Number Price (excluding tax) Flame retardant UL・sub758 Reinforcement plate length (I2) Reinforcement plate material Number of cores Withstand voltage between adjacent conductors Withstand voltage between conductor/shield Heat resistance 85℃×96h Humidity resistance 40℃, 95%RH×96h Low temperature resistance -40℃×48h Insulation resistance D.C.500V Insulator length (L) Insulator Insulating layer Insulator Adhesive layer Terminal thickness (t) Bending (insulation part) 180°folding self-unnatural bending Conductor exposed length l (I1) Conductor material Conductor thickness x width Rated current Rated voltage (V) Rated temperature (℃) Finished width (W) Margin width (M) Pitch (P) Total pitch (K) Shield material UL style
FFC cable LSG bank card (FFC with grounding) ASFBNCD-SB (shield reinforced type)-Part Number-ASFBNCD-SB (Shield reinforced type)

ASFBNCD-SB (Shield reinforced type)

Available upon quote

VW-1 passed

6±2.0

Polyester film (color: blue)

6~80

A.C.500V×1min No abnormality

A.C.250V×1min No abnormality

No insulation resistance or withstand voltage abnormalities

No insulation resistance or withstand voltage abnormalities

No insulation resistance or withstand voltage abnormalities

1,000MΩ-m or more

50~500
*K1 (same contact type: MAX1000)
*Tolerance: 50~100: ±2, 101~300: ±3, 301~500: ±5, 501~1,000: ±10

Polyester film (color: transparent)

Flame retardant polyester (color: white)

0.3±0.05

*20 times or more (excluding the base of the reinforcing plate and the area where the shield ground line is processed)

4±0.5

Gold-plated annealed copper foil Plating thickness: Au...0.05μm or more (base Ni...0.5μm or more) Terminal only

0.035±0.007×0.32±0.03

0.1A (1pin)

60

105

(N+1) ×Pitch±0.07

0.5±0.08

0.5

(N-1) ×Pitch±0.05

Polyester/metal foil/adhesive

20706

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More EMC Countermeasure Components Products

Other products of Bando Electric Cable Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Bando Electric Cable Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

50.8hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree