All Categories

History

Instrumentation system equipment differential pressure/pressure transmitter EJX110L wireless battery-powered type-EJX110L
Instrumentation system equipment differential pressure/pressure transmitter EJX110L wireless battery-powered type-Yonei Co., Ltd.

Instrumentation system equipment differential pressure/pressure transmitter EJX110L wireless battery-powered type
Yonei Co., Ltd.

Yonei Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

8.6hours

Fast Response


About This Product

■Summary

The EJX110L differential pressure transmitter is used to measure the flow rate, liquid level, and pressure of gas, liquid, and steam, and converts the value corresponding to the measured differential pressure into a wireless signal and transmits it. In addition to differential pressure and pressure signals, setting parameters can also be sent and received via wireless communication. In the case of battery drive, not only signal lines but also power supply wiring are unnecessary, and a significant reduction in installation costs can be expected. Communication specifications comply with ISA100.11a. Features

■License-free band wireless signal

The radio frequency band uses the ISM band (2.4 GHz), so no license is required.

■Long battery life

Long battery life has been achieved by using a high-capacity lithium battery and low power consumption design.

■Highly secure wireless settings

You can configure highly secure networks and parameters using infrared communication.

■Fastest wireless communication cycle of 0.5 seconds

You can select from the range of 0.5 seconds to 1 hour.

■Battery

・Large capacity lithium battery (size D x 2) ・Battery replacement possible in intrinsically safe explosion-proof areas

■Battery characteristics

Generally operates for 10 years (update cycle 30 seconds) or 5 years (update cycle 10 seconds) under the following conditions: ・Model with detachable antenna (amplifier case code 8 or 9) ・Device assignment ・IO mode ・Ambient temperature: 23 ± 2°C ・LCD display: OFF Built-in indicator

■LCD digital indicator

Display: Process value (5 digits), unit (6 digits), process value type (differential pressure, static pressure, temperature), bar graph, abnormality

■Alarm message

Display mode: Proportional, square root selection (differential pressure only) Alternate display of process values: Up to three process values ​​(differential pressure, static pressure, temperature) can be selected and displayed alternately, including alternate display of differential pressure and static pressure.

  • Product

    Instrumentation system equipment differential pressure/pressure transmitter EJX110L wireless battery-powered type

Share this product


80+ people viewing

Last viewed: 14 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Instrumentation system equipment differential pressure/pressure transmitter EJX110L wireless battery-powered type

Image Part Number Price (excluding tax) Static pressure accuracy (EJX110L) Explosion-proof structure Long-term stability (zero point) Communication speed Communication protocol Diagnostic function Accuracy Wireless module compliance standards Wireless security Update cycle Wetted temperature External power drive External zero adjustment mechanism Frequency band Ambient humidity Ambient temperature Output power Output mode Protection class Working pressure General safety standards Battery pack Software download function Zero point transition possible range Antenna EMC compliance standards
Instrumentation system equipment differential pressure/pressure transmitter EJX110L wireless battery-powered type-Part Number-EJX110L

EJX110L

Available upon quote

±0.5%

TIIS Intrinsically Safe
ATEX, FM, CSA, IECEx intrinsically safe explosion-proof type

±0.1% / 1 year

250kbps

Compatible with ISA100.11a (IEEE802.15.4)

Capsule abnormality, amplifier abnormality, process abnormality (device specification range exceeded), set value abnormality, remaining battery level, wireless communication abnormality.

±0.1%

This product uses specified radio equipment (certification number: 007WWCUL0480) that has received technical standards compliance certification based on the Radio Law.

AES 128bit encryption

Set in the range of 0.5 seconds ~ 60 minutes

-40 ~ 120°C (general type)

Rated voltage: 10.5 ~ 30VDC
Rated current: 36mA

Continuously variable. The amount of zero point transition changes depending on the speed at which the zero adjustment shaft is turned.
Resolution: 0.01% of span

2,400 - 2,83.5MHz

0~100%RH

-40 ~ 85 °C
-30 ~ 80 °C (built-in indicator visible range)

Maximum 11.6dBm (fixed)

Proportional/square root selection

IP66/IP67, NEMA4X

2.7kPa abs or more
Maximum working pressure: 16MPa

EN61010-1, EN61010-2-030

Uses 2 lithium thionyl chloride batteries
Battery case included (batteries sold separately)

It is possible to update the software inside wireless field devices via ISA100.11a wireless communication.

Both the negative direction transition amount and the positive direction transition amount can be set as long as the lower and upper limits of the measurement range do not exceed the measurement range of each capsule.

#ERROR!

EEN61326-1 Class A, Table 2 (industrial use), EN61326-2-3

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Transmitters Products

Other products of Yonei Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Yonei Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

8.6hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree