All Categories

History

Electric Lock/Solenoid Latch, Self-Holding Type EST Lock (Solenoid S-1MK-5V) LD-0051-LD-0051
Electric Lock/Solenoid Latch, Self-Holding Type EST Lock (Solenoid S-1MK-5V) LD-0051-TOCHIGIYA CO.,LTD.

Electric Lock/Solenoid Latch, Self-Holding Type EST Lock (Solenoid S-1MK-5V) LD-0051
TOCHIGIYA CO.,LTD.


About This Product

■Features

1. This product is an electric lock with a built-in self-holding solenoid (keep solenoid). 2. The lock and unlock states are switched by energizing the solenoid. 3. The built-in microswitch (MS1) detects the state of part number 4 lock cam. 4. This product has a drip-proof structure that will not lose function even if exposed to water, provided it is installed in the correct orientation.

■Precautions

1. Depending on the door's trajectory, the main unit and the keeper may interfere with each other. Please verify this using the drawings or the actual device. 2. Do not apply load to the lock cam from the side. 3. Do not apply load to the lead wires. 4. This product can only be used in the installation direction shown in this diagram. (Cannot be used upside down or sideways) 5. When this product is locked (as shown in the diagram), if a load is applied to the lock cam in the direction of opening the door, the solenoid will not operate and the lock will not be released. (*) In such cases, please use a catch or similar device to hold the door in place. *Load in the direction of opening the door: This refers to the repulsion of gaskets between the door and the housing, or the constant load in the direction of opening the door due to spring hinges, etc. 6. Although this product has drip-proof properties, please refrain from using it in places where freezing, condensation, or dust occurs, or when directly exposing this product to the outdoors. 7. If this product is powered on continuously for more than 5 seconds, there is a risk of wire breakage due to overheating. When using it again, please wait until the solenoid coil has cooled down sufficiently. *Custom orders are accepted.

  • Product

    Electric Lock/Solenoid Latch, Self-Holding Type EST Lock (Solenoid S-1MK-5V) LD-0051

Share this product


740+ people viewing

Last viewed: 8 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Electric Lock/Solenoid Latch, Self-Holding Type EST Lock (Solenoid S-1MK-5V) LD-0051

Image Part Number Price (excluding tax) Electrical Ratings (Microswitch) Withstanding Voltage Electrical Ratings (Microswitch) Insulation Resistance Electrical Ratings (Microswitch) Contact Resistance Electrical Ratings (Microswitch) Ratings Electrical Ratings (Microswitch) Operating Temperature Range Electrical rating (solenoid self-holding type) -8 Electrical rating (solenoid self-holding type) -7 Electrical rating (solenoid self-holding type) -6 Electrical rating (solenoid self-holding type) -5 Electrical rating (solenoid self-holding type) -4 Electrical rating (solenoid self-holding type) -3 Electrical rating (solenoid self-holding type) -2 Electrical rating (solenoid self-holding type) -1 Part name-2 Part name-1 Dead weight (g) Material-2 Material-1 Number Process
Electric Lock/Solenoid Latch, Self-Holding Type EST Lock (Solenoid S-1MK-5V) LD-0051-Part Number-LD-0051

LD-0051

Available upon quote

AC600 (V) /1 minute

100MΩ or more (DC500V)

140mΩ or more (initial value)

DC30V 0.1A (resistive load)

-40℃~+85℃ 60%RH or less (However, no freezing or condensation)

Temperature rise: 65K or less (with intermittent application)

Insulation resistance: 50MΩ or more/DC500V

Heat resistance class (insulation class): Class A insulation

Withstand voltage: AC500 (V) (50/60Hz) / 1 minute

Usage rating (energization rate): Intermittent rating (2.9%) ≒ON 0.3 seconds OFF 10 seconds)

Rated current: 1.67 (A)

DC resistance: 3.0Ω (ambient temperature 20℃)

Rated voltage: DC5 (V)

Cross recessed countersunk screws, cross recessed pan head screws, thin flat rivets, micro switches, spacers, grommets

Base, cover, hook, lock cam, lever, solenoid, hook spring, lock cam spring, keeper

390

Countersunk screw with cross recess, pan head screw with cross recess, thin flat rivet: SUS
Spacer: POM
Grommet: EPDM

Base: ZDC2
Cover, hook, keeper: SUS304
Lock cam, lever: SUS430
Hook spring, lock cam spring: SUS-304-WPB

1 each except for the following
Countersunk screw with cross recess: 6
Cross-recessed pan head machine screw, spacer: 2

Base: trivalent chromate
Cover, hook, lock cam, lever, keeper: Barrel polishing
Spacer, grommet: black

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More DC Solenoids Products

Other products of TOCHIGIYA CO.,LTD.

Reviews shown here are reviews of companies.


View more products of TOCHIGIYA CO.,LTD.

About Company Handling This Product

Company Overview

TOCHIGIYA CO., LTD., founded in 1913 and established in 1949, is a Japanese manufacturer and distributor based...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2026 Metoree