FFT analyzer Immediate decision/immediate response One unit that can be entrusted to the field where no compromises can be made Portable 2 channel / 4 channel CF-9000A series
Meishin Koki Co., Ltd.
About This Product
■Summary
・No PC required for analysis. 24-bit, 100 kHz, 4ch analysis high-performance front-end model
・All FFT analyzer operations can be performed using only the hard keys and capacitive touch panel on the main unit.
Features
■Quick, light, and intuitive operation with keys and touch panel
・Execute basic FFT analyzer operations such as display, measurement, stop, record, and read using large hard keys
・Promises reliable and speedy operation
・Intuitive operations such as setting the number of waveforms displayed and scaling the X and Y axes can be done by swiping or pinching your finger on the touch panel.
・Easily changeable to desired scale
■ 8 hours of continuous cordless operation * Batteries can be replaced while the power is on
- Equipped with two large capacity lithium ion secondary batteries. Achieves 8 hours of continuous cordless operation with continuous operation
・Hot-swap mechanism allows you to replace the battery while the power is on, allowing you to continue measuring without interrupting or reconfiguring analysis or recording.
・The built-in battery can be charged during operation. *About 7 to 8 hours with the power on until fully charged (depending on usage conditions) Approximately 7 to 8 hours with the power off (in a usage environment of 20℃)
■FFT/RTA/excitation control & simultaneous recording
・In addition to FFT analysis, real-time octave analysis (RTA), rotation tracking analysis, linear/Log/sweep analysis using signal output, and amplitude excitation control of electromagnetic exciters are all condensed into a portable device.
- Simultaneous recording during analysis is also possible, and offline analysis is possible using the CF-9200A/9400A main unit or peripheral software.
■Fanless and spindleless, silent and vibration-free
-The CF-9200A/9400A does not generate mechanical noise or vibrations, so the CF-9200A/9400A does not become a source of noise or vibration at the site of sound/vibration measurement and recording.
- By attaching a wireless LAN adapter, you can operate the CF-9200A/9400A using a tablet device, etc. without touching the main unit.
-
Product
FFT analyzer Immediate decision/immediate response One unit that can be entrusted to the field where no compromises can be made Portable 2 channel / 4 channel CF-9000A series
-
Handling Company
Meishin Koki Co., Ltd.
-
Categories
1 Models of FFT analyzer Immediate decision/immediate response One unit that can be entrusted to the field where no compromises can be made Portable 2 channel / 4 channel CF-9000A series
| Product Image | Part Number | Price (excluding tax) | A/D converter | Absolute maximum input voltage | Body cooling | DC offset | Disconnection detection function | Display device size | Dynamic range | External dimensions | Frequency accuracy | Frequency range | Functional ground terminal | Input connector | Input format | Input impedance | Input join | Input level monitor | Input voltage range | Isolation | Mass | Method | Number of input channels | Operating temperature range | Power consumption | Power supply | Resolution | Sampling frequency | Sensor current (CCLD) | Storage temperature range | TEDS function |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
CF-9200A |
Available upon quote | 24 bit ΔΣ type | AC 70 Vrms for 1 minute (50 Hz) | Natural air cooling (FANless) | -60 dB F.S or less (when auto zero is ON) | Detects cable breakage when using CCLD | 10.4 type | 120 dB or more (FFT frame length of 4,096 points or more and 1 kHz or more) | Less than 333 (W) × 248 (H) × 112 (D) mm *Excluding handle and stand protrusions | ±0.005% of reading (±50 ppm) | 100mHz~100kHz | Ground terminal for noise removal | BNC (CO2 type) | Single ended | 1 MΩ ±0.5% 100 pF or less | DC or AC (0.5 Hz – 3 dB±10%) | Red LED lights up with excessive input (lights up with range F.S) | 1 Vrms, 31.62 Vrms (2 ranges) | Each CH isolated (always) |
Approximately 3.8 kg without battery installed Approximately 4.8 kg with 2 batteries installed |
TFT color LCD with capacitive touch panel | 2 channels | 0~+40 ℃ (Humidity 20~80% RH, non-condensing) |
73 VA or less (using AC adapter, when not charging battery) 150 VA or less (when using AC adapter and charging battery) |
Attached AC adapter or attached battery | 800 x 600 dots *Percentage of effective dots is over 99.999% | Frequency 2.56 times the analysis range (at internal sampling) | Coaxial current supply to constant current supply type sensor via input connector (BNC terminal): +24 V /4 mA | -10~+50 ℃ (Including lithium ion secondary battery) (Humidity 20~80% RH, non-condensing) |
IEEE1451.4 Template Ver.0.9/1.0 Acceleration sensor, microphone, IEEE1451.4 Template Ver.1.0 Force sensor |
Customers who viewed this product also viewed
Other products of Meishin Koki Co., Ltd.
View more products of Meishin Koki Co., Ltd.
About Company Handling This Product
- Japan