Tilt angle detector CMS-90-CMS-90
Tilt angle detector CMS-90-Shibukawa Kuwano Electric Co., Ltd.

About This Product

Detects the tilt angle relative to the earth's center of gravity and converts it into an electrical signal This product is a torque balance type detector that we independently developed based on our experience as a measuring instrument manufacturer, and it has many features. Detects the angle of inclination from the horizontal or vertical, and the electrical output is proportional to the sine (or cosine) of the inclination angle. Where the inclination angle is small, an output proportional to the inclination angle can be obtained. Features ■Torque balance method developed by our company This is a completely new torque balance method developed by our company, which combines a meter mechanism and an electronic circuit based on a photocoupler to form a bridge circuit, and has many excellent features. ■High precision and high resolution High resolution allows for highly accurate measurements. ■Output is proportional to sine (sinθ) An electrical output proportional to the sine (sinθ) of the inclination angle is obtained. Therefore, in places where the angle of inclination is small, it is possible to obtain an electrical output that is approximately proportional to the angle of inclination. Also, by changing the installation by 90 degrees, it is possible to obtain an electrical output proportional to the cosine (cosθ) of the inclination angle. ■Output is large and constant current output Since the electrical output is large, the display can be read directly with an electric meter without the use of an amplifier. Also, since the output is a constant current output method, it is hardly affected by changes in load resistance. ■Wide operating temperature range In order to withstand use not only in Japan but also overseas, we use parts that can withstand a wide temperature range. ■Less affected by temperature and aging Because it is balanced by a bridge circuit, the output current is stable over a wide range of temperature changes. Similarly, even if the parts used change over time due to long-term use, the output current is corrected by the bridge circuit and remains stable. You can get the following output. ■Strong mechanical strength Although it has a configuration that applies a meter mechanism, the balance torque generated by the current is very strong, so it has strong mechanical strength and excellent vibration and impact resistance. Easy zero position adjustment The zero position is fully adjusted at the time of shipment, but if you wish to correct any deviations in the zero position due to incorrect installation, etc., it can be easily adjusted externally electrically. ■Low power consumption Since the power consumption is low, it can be easily powered by batteries, etc., and can also be used as a portable device.

  • Product

    Tilt angle detector CMS-90

Share this product


60+ people viewing

Last viewed: 21 hours ago


Free
Since our quotes are free, feel free to use our service.

No Phone Number Required
You won’t have to worry about receiving unnecessary calls.

1 Models of Tilt angle detector CMS-90

Product Image Part Number Price (excluding tax) Accuracy (20℃±5℃) Effects of power fluctuations External shape/weight Insulation resistance Operating temperature range Output Output current Output Relationship with tilt angle Output load resistance Power supply Rated angle of inclination Resolution Response time Temperature characteristics Vibration resistance/impact resistance Waterproof Withstand voltage Zero adjustment range (from outside)
Tilt angle detector CMS-90-Part Number-CMS-90

CMS-90

Available upon quote ±10μA/±36min/cosθ ±36min/cosθ/10℃ 85φ×115h 750g Between electric circuit and case 50MΩ or more (500V megger) -20℃~+70℃ ±1mA/±90 degrees Proportional to the sine (sinθ) of the inclination angle 1kΩ (1V) or less DC12V approx. 50mA ±90 degrees 4μA/12min/cosθ Less than 0.5 seconds for step change ±36min/cosθ/10℃ JIS A8101 (vibration 3mm, total amplitude 33.3Hz 6.8G, impact 25G 3 directions) Completely sealed waterproof type (water pressure resistance 2m) Between electric circuit and case 500V AC for 1 minute ±0.5 degree

Customers who viewed this product also viewed

Other products of Shibukawa Kuwano Electric Co., Ltd.


View more products of Shibukawa Kuwano Electric Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree