All Categories

History

Tilt angle detector CMS-05A-XY-CMS-05A-XY
Tilt angle detector CMS-05A-XY-Shibukawa Kuwano Electric Co., Ltd.

Tilt angle detector CMS-05A-XY
Shibukawa Kuwano Electric Co., Ltd.

Shibukawa Kuwano Electric Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

61.5hours


About This Product

Detects the tilt angle relative to the earth's center of gravity and converts it into an electrical signal This product is a torque balance type detector that we independently developed based on our experience as a measuring instrument manufacturer, and it has many features. Detects the angle of inclination from the horizontal or vertical, and the electrical output is proportional to the sine (or cosine) of the inclination angle. Where the inclination angle is small, an output proportional to the inclination angle can be obtained. Features

■Torque balance method developed by our company

This is a completely new torque balance method developed by our company, which combines a meter mechanism and an electronic circuit based on a photocoupler to form a bridge circuit, and has many excellent features.

■High precision and high resolution

High resolution allows for highly accurate measurements.

■Output is proportional to sine (sinθ)

An electrical output proportional to the sine (sinθ) of the inclination angle is obtained. Therefore, in places where the angle of inclination is small, it is possible to obtain an electrical output that is approximately proportional to the angle of inclination. Also, by changing the installation by 90 degrees, it is possible to obtain an electrical output proportional to the cosine (cosθ) of the inclination angle.

■Output is large and constant current output

Since the electrical output is large, the display can be read directly with an electric meter without the use of an amplifier. Also, since the output is a constant current output method, it is hardly affected by changes in load resistance.

■Wide operating temperature range

In order to withstand use not only in Japan but also overseas, we use parts that can withstand a wide temperature range.

■Less affected by temperature and aging

Because it is balanced by a bridge circuit, the output current is stable over a wide range of temperature changes. Similarly, even if the parts used change over time due to long-term use, the output current is corrected by the bridge circuit and remains stable. You can get the following output.

■Strong mechanical strength

Although it has a configuration that applies a meter mechanism, the balance torque generated by the current is very strong, so it has strong mechanical strength and excellent vibration and impact resistance. Easy zero position adjustment The zero position is fully adjusted at the time of shipment, but if you wish to correct any deviations in the zero position due to incorrect installation, etc., it can be easily adjusted externally electrically.

■Low power consumption

Since the power consumption is low, it can be easily powered by batteries, etc., and can also be used as a portable device.

  • Product

    Tilt angle detector CMS-05A-XY

Share this product


80+ people viewing

Last viewed: 18 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Tilt angle detector CMS-05A-XY

Image Part Number Price (excluding tax) Effects of power fluctuations Power supply Zero adjustment range (from outside) Waterproof Withstand voltage Vibration resistance/impact resistance Insulation resistance Accuracy (20℃±5℃) Temperature characteristics Response time Rated angle of inclination External shape/weight Resolution Output load resistance Output Output current Output Relationship with tilt angle Operating temperature range
Tilt angle detector CMS-05A-XY-Part Number-CMS-05A-XY

CMS-05A-XY

Available upon quote

±3 minutes/±10%

DC12V approx. 100mA

±0.5 degree

Completely sealed waterproof type (water pressure resistance 2m)

Between electric circuit and case 500V AC for 1 minute

JIS A8101 (vibration 3mm, total amplitude 33.3Hz 6.8G, impact 25G 3 directions)

Between electric circuit and case 50MΩ or more (500V megger)

±3 minutes (±1% of 5 degrees)

±3 minutes/10℃

Less than 0.5 seconds for step change

X direction ±5 degrees Y direction ±5 degrees 2 elements

85φ×115h 800g

1.0 minutes (0.3% of 5 degrees)

2kΩ (1V) or less

X direction ±500μA/±5 degrees
Y direction ±500μA/±5 degrees

Proportional to inclination angle

-20℃~+70℃

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Tilt Sensors Products

Other products of Shibukawa Kuwano Electric Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Shibukawa Kuwano Electric Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

61.5hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree